South African Class GDA 2-6-2+2-6-2

South African Class GDA 2-6-2+2-6-2
No. 2255, Stanger Depot, 8 September 1966
Type and origin Power type Steam Designer Beyer, Peacock and Company Builder Linke-Hofmann Werke AG Serial number 3115-3119 Model Class GDA Build date 1929 Total produced 5
Specifications Configuration: ​  • Whyte 2-6-2+2-6-2 (Double Prairie)  • UIC 1'C1'+1'C1'h4t Driver 3rd & 4th coupled axles Gauge 3 ft 6 in (1,067 mm) Cape gauge Leading dia. 28+1⁄2 in (724 mm) Coupled dia. 46 in (1,168 mm) Trailing dia. 28+1⁄2 in (724 mm) Wheelbase 58 ft 4 in (17,780 mm) ​  • Engine 18 ft 9 in (5,715 mm) each  • Coupled 8 ft 6 in (2,591 mm) each Pivot centres 30 ft 6 in (9,296 mm) Length: ​  • Over couplers 65 ft 11 in (20,091 mm) Height 12 ft 10+1⁄4 in (3,918 mm) Frame type Bar Axle load 13 LT 14 cwt (13,920 kg) ​  • Leading 12 LT 1 cwt (12,240 kg) front 11 LT 7 cwt (11,530 kg) rear  • 1st coupled 13 LT 1 cwt (13,260 kg)  • 2nd coupled 13 LT 8 cwt (13,620 kg)  • 3rd coupled 13 LT 8 cwt (13,620 kg)  • 4th coupled 13 LT 14 cwt (13,920 kg)  • 5th coupled 13 LT 13 cwt (13,870 kg)  • 6th coupled 12 LT 7 cwt (12,550 kg)  • Trailing 8 LT 7 cwt (8,484 kg) front 8 LT 11 cwt (8,687 kg) rear Adhesive weight 79 LT 11 cwt (80,830 kg) Loco weight 119 LT 17 cwt (121,800 kg) Fuel type Coal Fuel capacity 5 LT (5.1 t) Water cap. 2,300 imp gal (10,500 L) front 1,500 imp gal (6,820 L) rear Firebox: ​  • Type Round-top  • Grate area 40 sq ft (3.7 m2) Boiler: ​  • Pitch 7 ft 9+1⁄4 in (2,369 mm)  • Diameter 5 ft 11+3⁄4 in (1,822 mm)  • Tube plates 10 ft 7+7⁄8 in (3,248 mm)  • Small tubes 193: 2 in (51 mm)  • Large tubes 32: 5+1⁄2 in (140 mm) Boiler pressure 180 psi (1,241 kPa) Safety valve Pop Heating surface: ​  • Firebox 181 sq ft (16.8 m2)  • Tubes 1,569 sq ft (145.8 m2)  • Total surface 1,750 sq ft (163 m2) Superheater: ​  • Heating area 370 sq ft (34 m2) Cylinders Four Cylinder size 15 in (381 mm) bore 24 in (610 mm) stroke Valve gear Walschaerts Valve type Piston Couplers AAR knuckle
Performance figures Tractive effort 31,690 lbf (141.0 kN) @ 75%
Career Operators South African Railways Class Class GDA Number in class 5 Numbers 2255-2259 Delivered 1929 First run 1929 Withdrawn c. 1972

The South African Railways Class GDA 2-6-2+2-6-2 of 1929 was an articulated steam locomotive.

In December 1929, the South African Railways placed five Class GDA Garratt articulated locomotives with a 2-6-2+2-6-2 Double Prairie type wheel arrangement in branch line service on the Natal North Coast line.

Manufacturer

The Class GDA 2-6-2+2-6-2 Double Prairie type Garratt locomotive was built to the same specifications and was for all intents and purposes identical to the Class GD in its main dimensions. They were ordered from Linke-Hofmann Werke AG in Breslau, Germany in 1929 and numbered 2255 to 2259 upon delivery in December of that same year.

Characteristics

The locomotive had the same tractive effort as the Class GD, was also superheated and also had Walschaerts valve gear to actuate its piston valves. The main differences were the use of bar frames instead of plate frames, differently shaped coal and water bunkers, and a round-topped firebox instead of a Belpaire firebox.

Service

The five locomotives were placed in service working out of Cape Town where they were to join the Class GD on the Overberg branch across Sir Lowry's Pass to Caledon and Bredasdorp, but they were found to be not satisfactory in service and ended up being staged on a siding near the Cape Town sheds for a considerable time. When a question was raised in the local press, enquiring the reason why these brand new locomotives were not being used, they were first moved to a less conspicuous location and shortly afterwards transferred to Natal.

The Natal shops managed to get the locomotives to perform satisfactorily and they were placed in branch line service on the North Coast line in Natal, working around Stanger. This line contains long gradients of 1 in 40 (2½%) and severe curvature with curves of 300 feet (91 metres) radius. Some locomotives later ended up working on the Port Alfred branch. In 1970 a pair was sent to Port Elizabeth where they worked local goods trains until they were all withdrawn by 1972.

SAR locomotive policy

During the term of office of Colonel F.R. Collins DSO as SAR Chief Mechanical Engineer from 1922 to 1929 articulated locomotives were in great favour in South Africa, to the extent that the Railway Board of the day instructed that non-articulated engines should only be ordered in exceptional circumstances. His retirement in 1929 brought about a change in policy, however, and there would be an interval of nearly a decade before another articulated Cape gauge Garratt would be acquired.

Preservation

Two locomotives were "preserved". No. 2257 was plinthed at Grahamstown Station. After the branch line via Grahamstown to Port Alfred fell into disuse, however, an apathetic local government allowed Grahamstown's historic station buildings and especially the plinthed locomotive to be vandalised to an eyesore state by 2013. Another engine, no. 2259, was staged at the South African National Railway And Steam Museum in Krugersdorp.

Illustration

• 
  No. 2257 in factory grey livery, c. 1929

• 
  No. 2259 on the Natal North Coast, May 1971
• 
  No. 2257 plinted at Grahamstown Station, c. 1991