Jump to content

South African Class 6H 4-6-0

From Wikipedia, the free encyclopedia

CGR 6th Class 4-6-0 1901 Neilson Reid
South African Class 6H 4-6-0
CGR 6th Class no. 607, then no. 547, SAR Class 6H no. 629, at Midlandia Loco, Noupoort
Type and origin
Power typeSteam
DesignerCape Government Railways
(H.M. Beatty)
BuilderNeilson, Reid and Company
Serial number5871-5891
ModelCGR 6th Class
Build date1901
Total produced21
Specifications
Configuration:
 • Whyte4-6-0 (Tenwheeler)
 • UIC2'Cn2
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.28+12 in (724 mm)
Coupled dia.54 in (1,372 mm)
Tender wheels33+12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase45 ft 8+12 in (13,932 mm) ​
 • Axle spacing
(Asymmetrical)
1-2: 4 ft 9 in (1,448 mm)
2-3: 6 ft 7 in (2,007 mm)
 • Engine20 ft 8 in (6,299 mm)
 • Leading5 ft 6 in (1,676 mm)
 • Coupled11 ft 4 in (3,454 mm)
 • Tender14 ft 7 in (4,445 mm)
 • Tender bogie4 ft 7 in (1,397 mm)
Length:
 • Over couplers52 ft 11+34 in (16,148 mm)
Height12 ft 10 in (3,912 mm)
Frame typePlate
Axle load12 LT 11 cwt (12,750 kg) ​
 • Leading11 LT 14 cwt (11,890 kg)
 • Coupled12 LT 11 cwt (12,750 kg)
 • Tender bogieBogie 1: 16 LT 15 cwt (17,020 kg)
Bogie 2: 17 LT 8 cwt (17,680 kg)
 • Tender axle8 LT 14 cwt (8,840 kg)
Adhesive weight37 LT 13 cwt (38,250 kg)
Loco weight49 LT 7 cwt (50,140 kg)
Tender weight34 LT 3 cwt (34,700 kg)
Total weight83 LT 10 cwt (84,840 kg)
Tender typeXD (2-axle bogies)
XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3, XM4, XP1, XS permitted
Fuel typeCoal
Fuel capacity5 LT 10 cwt (5.6 t)
Water cap.2,730 imp gal (12,400 L)
Firebox:
 • TypeRound-top
 • Grate area18 sq ft (1.7 m2)
Boiler:
 • Pitch6 ft 10 in (2,083 mm)
 • Diameter4 ft 6 in (1,372 mm)
 • Tube plates11 ft 2+18 in (3,407 mm)
 • Small tubes185: 1+78 in (48 mm)
Boiler pressure180 psi (1,241 kPa)
170 psi (1,172 kPa) adjusted
Safety valveRamsbottom
Heating surface:
 • Firebox115 sq ft (10.7 m2)
 • Tubes1,015 sq ft (94.3 m2)
 • Total surface1,130 sq ft (105 m2)
CylindersTwo
Cylinder size17 in (432 mm) bore
26 in (660 mm) stroke
Valve gearStephenson
CouplersJohnston link-and-pin
AAR knuckle (1930s)
Performance figures
Tractive effort18,780 lbf (83.5 kN) @ 75%
17,740 lbf (78.9 kN) adjusted
Career
OperatorsCape Government Railways
South African Railways
ClassCGR 6th Class, SAR Class 6H
Number in class21
NumbersCGR 278-286, 601-612 (541-552)
SAR 614-634
Delivered1901
First run1901

The South African Railways Class 6H 4-6-0 of 1901 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1901, 21 6th Class 4-6-0 steam locomotives were placed in service by the Cape Government Railways, built to the older 6th Class designs with plate frames. In 1912, when they were assimilated into the South African Railways, they were renumbered and designated Class 6H.[1][2][3]

Manufacturer

[edit]

The original Cape 6th Class locomotive was designed at the Salt River works of the Cape Government Railways (CGR), at the same time as the 7th Class.[1]

H.M. Beatty

Three new versions of the 6th Class locomotive entered service on the CGR in 1901, two American-built and one British-built. The British version was built by Neilson, Reid and Company, who delivered 21 engines. With these locomotives, CGR Chief Locomotive Superintendent H.M. Beatty kept to the older plate frame design, but fitted the larger type of cab. These locomotives were also equipped with the 17 inches (432 millimetres) diameter cylinders which had been used on all previous 6th Class locomotives with the exception of the Class 6G. Another similarity to the early 6th Class locomotives was their lower running boards with fairings or splashers over the coupled wheels.[1][4][5]

Upon delivery, nine of them were numbered in the range from 278 to 286 and allocated to the Western System of the CGR. The other twelve were numbered in the range from 601 to 612 for the Midland System, but later renumbered in the range from 541 to 552.[1]

Drummond tubes

[edit]

One of these locomotives, the Western System's no. 286, was an experimental locomotive, equipped with Drummond water tubes in the firebox and a very large panelled cab. Drummond tubes involved the installation of cross-water tubes in the firebox, as featured on the London and South Western Railway's T9 Class and L11 Class, in an attempt to increase the heating surface area of the water, albeit at the cost of increased boiler complexity. On CGR no. 286, as built, visible exterior evidence of the presence of Drummond tubes was rectangular covers attached to the sides of the firebox just ahead of the cab.[1]

In service, it was found that the tubes did not affect the steaming capacity of the boiler to any significant extent. Instead, the tubes were inclined to leak and were difficult to maintain. It was therefore not long before the tubes were removed. At the same time, the cab was changed to the standard type, as used on the other twenty locomotives.[1]

Class 6 sub-classes

[edit]

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.[2][6]

When these locomotives were assimilated into the South African Railways (SAR) in 1912, they were renumbered in the range from 614 to 634 and designated Class 6H.[2][4][5][7]

The rest of the CGR's 6th Class locomotives, together with the Central South African Railways (CSAR) Classes 6-L1 to 6-L3 locomotives which had been inherited from the Oranje-Vrijstaat Gouwerment-Spoorwegen (OVGS) via the Imperial Military Railways (IMR), were grouped into thirteen more sub-classes by the SAR. The 4-6-0 locomotives became SAR Classes 6, 6A to 6G and 6J to 6L, the 2-6-2 locomotives became Class 6Y and the 2-6-4 locomotives became Class 6Z.[2][4][5][7]

Service

[edit]

The Class 6 family of locomotives were introduced primarily as passenger locomotives, but when the class became displaced by larger and more powerful locomotive classes, it literally became a Jack-of-all-trades. It went on to see service in all parts of the country, except in Natal, and was used on all types of traffic.[1]

After the Simon's Town line in Cape Town was electrified in 1928, Class 6H engines that used to haul commuters on this line became dock shunting engines in Table Bay Harbour. This continued until they were gradually replaced by new Class S2 0-8-0 shunting engines from 1952.[8]

Renumbering

[edit]

The table lists the Class 6H works numbers and renumbering.[1][2][7]

Commemoration

[edit]

A 25c postage stamp which depicted a Class 6H locomotive was one of a set of four commemorative postage stamps which were issued by the South African Post Office on 27 April 1983 to commemorate the steam locomotives of South Africa, which were rapidly being withdrawn from service at the time. The artwork and stamp design was by the noted stamp designer and artist Hein Botha.[9]

The particular locomotive depicted was ex CGR (Midland System) 6th Class no. 605, renumbered to CGR no. 545 and later SAR Class 6H no. 627, which was withdrawn from service in 1971 and plinthed at the Mafikeng Museum in 1972. The outline of a traditional SAR locomotive number plate was used on the date of release as a commemorative cancellation for De Aar.[9][10]

Illustration

[edit]

The main picture and the following show the differences in appearance of the Class 6H during its service life, with different cabs, headlights and cowcatcher designs.

References

[edit]
  1. ^ a b c d e f g h Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 48–49, 56. ISBN 978-0-7153-5382-0.
  2. ^ a b c d e Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 8, 12, 14, 32-33 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  3. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 41–43. ISBN 0869772112.
  4. ^ a b c South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  5. ^ a b c South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6-7, 41, 43.
  6. ^ The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  7. ^ a b c Holland, D. F. (1972). Steam Locomotives of the South African Railways. Vol. 2: 1910-1955 (1st ed.). Newton Abbott, England: David & Charles. p. 138. ISBN 978-0-7153-5427-8.
  8. ^ Soul of A Railway, System 1, Part 16: Table Bay Harbour © Les Pivnic. Caption 109, 117, 119. Archived 24 October 2020 at the Wayback Machine (Accessed on 30 June 2017)
  9. ^ a b Philatelic Bulletin 176, issued by Philatelic Services and INTERSAPA, 1983
  10. ^ Old STEAM LOCOMOTIVES in South Africa - Mafikeng Museum: SAR Class 6H Steam Locomotive (Accessed on 17 November 2016)