Jump to content

South African Class GCA 2-6-2+2-6-2

From Wikipedia, the free encyclopedia

South African Class GCA 2-6-2+2-6-2
No. 2615 at Greyville, November 1971
Type and origin
♠ First order - Second order
Power typeSteam
DesignerSouth African Railways
(Col F.R. Collins DSO)
BuilderFriedrich Krupp AG
Serial number970-982, 1042-1068
ModelClass GCA
Build date1927-1928
Total produced39
Specifications
Configuration:
 • Whyte2-6-2+2-6-2 (Double Prairie)
 • UIC1'C1'+1'C1'h4t
Driver3rd & 4th coupled axles
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.28+12 in (724 mm)
Coupled dia.42+34 in (1,086 mm)
Trailing dia.28+12 in (724 mm)
Wheelbase56 ft 8 in (17,272 mm) ​
 • Engine17 ft 8+14 in (5,391 mm) each
 • Coupled8 ft (2,438 mm) each
Pivot centres29 ft 8 in (9,042 mm)
Length:
 • Over couplers64 ft 9 in (19,736 mm)
Height12 ft 7 in (3,835 mm)
Frame typeBar
Axle load♠ 11 LT 16 cwt (11,990 kg)
11 LT 14 cwt (11,890 kg) ​
 • Leading♠ 10 LT 2 cwt (10,260 kg) front
10 LT 17 cwt (11,020 kg) rear
10 LT 10 cwt (10,670 kg) front
10 LT 9 cwt (10,620 kg) rear
 • 1st coupled♠ 10 LT 19 cwt (11,130 kg)
10 LT 16 cwt (10,970 kg)
 • 2nd coupled♠ 10 LT 12 cwt (10,770 kg)
10 LT 19 cwt (11,130 kg)
 • 3rd coupled♠ 10 LT 12 cwt (10,770 kg)
10 LT 19 cwt (11,130 kg)
 • 4th coupled♠ 11 LT 2 cwt (11,280 kg)
11 LT 13 cwt (11,840 kg)
 • 5th coupled♠ 11 LT 2 cwt (11,280 kg)
11 LT 14 cwt (11,890 kg)
 • 6th coupled♠ 11 LT 16 cwt (11,990 kg)
10 LT 16 cwt (10,970 kg)
 • Trailing♠ 8 LT 8 cwt (8,535 kg) front
8 LT 16 cwt (8,941 kg) rear
8 LT 14 cwt (8,840 kg) front
9 LT 6 cwt (9,449 kg) rear
Adhesive weight♠ 66 LT 3 cwt (67,210 kg)
66 LT 17 cwt (67,920 kg)
Loco weight♠ 104 LT 6 cwt (106,000 kg)
105 LT 16 cwt (107,500 kg)
Fuel typeCoal
Fuel capacity7 LT (7.1 t)
Water cap.2,000 imp gal (9,090 L) front
1,000 imp gal (4,550 L) rear
Firebox:
 • TypeRound top
 • Grate area34 sq ft (3.2 m2)
Boiler:
 • Pitch7 ft 4+38 in (2,245 mm)
 • Diameter5 ft 2 in (1,575 mm)
 • Tube plates11 ft 3+58 in (3,445 mm)
 • Small tubes141: 2 in (51 mm)
 • Large tubes24: 5+12 in (140 mm)
Boiler pressure180 psi (1,241 kPa)
Safety valvePop
Heating surface:
 • Firebox142 sq ft (13.2 m2)
 • Tubes1,225 sq ft (113.8 m2)
 • Arch tubes21 sq ft (2.0 m2)
 • Total surface1,388 sq ft (128.9 m2)
Superheater:
 • Heating area331 sq ft (30.8 m2)
CylindersFour
Cylinder size14 in (356 mm) bore
23 in (584 mm) stroke
Valve gearHeusinger
Valve typePiston
CouplersAAR knuckle
Performance figures
Tractive effort28,470 lbf (126.6 kN) @ 75%
Career
OperatorsSouth African Railways
ClassClass GCA
Number in class39
Numbers2190-2202, 2600-2625
Delivered1927-1928
First run1927
Withdrawn1975

The South African Railways Class GCA 2-6-2+2-6-2 of 1927 was an articulated steam locomotive.

In 1927, the South African Railways placed thirteen Class GCA Garratt articulated steam locomotives with a 2-6-2+2-6-2 Double Prairie type wheel arrangement in branch line service. Another batch of twenty-six locomotives was acquired in 1928.[1][2][3]

Manufacturer

[edit]
Col F.R. Collins DSO

The Class GCA 2-6-2+2-6-2 Double Prairie type Garratt steam locomotive was built to the specifications and design of Colonel F.R. Collins DSO, Chief Mechanical Engineer of the South African Railways (SAR), based on the design of the Class GC Garratt. Thirteen locomotives were ordered from Friedrich Krupp AG of Essen in Germany, who delivered them during October 1927, numbered in the range from 2190 to 2202.[1][2][3][4][5][6][7]

A second order for another 26 locomotives was placed with the same manufacturer in 1928. These were numbered in the range from 2600 to 2625 when they were delivered during August in that same year.[1][3][4][5]

Characteristics

[edit]

The Class GCA had the same tractive effort and main dimensions as the Class GC, but was built on bar frames instead of plate frames. They also differed in general appearance by having round-topped fireboxes, compared to the Belpaire fireboxes of the Class GC, and with water tanks and built-up coal bunkers of a different shape. The second batch of locomotives differed slightly from the first and were 1 long ton 10 hundredweight (1,524 kilograms) heavier. Like the predecessor Class GC, they were all superheated and had Walschaerts valve gear.[1][3]

The Class GCA proved to be good locomotives, although some trouble was experienced with coupling rods breaking, much of which was attributed to running them at excessive speed to maintain schedules with their small coupled wheel diameter of only 42+34 inches (1,086 millimetres).[1][2][3]

Experience showed that the performance of these locomotives could have been better if they had been fitted with somewhat larger cylinders since their boilers still had an appreciable margin of capacity.[2]

Service

[edit]
English only
Bilingual

The first batch of locomotives were placed in service on the Natal South Coast line and shedded at Greyville, while the second batch were distributed wherever their services were required. These could be found working around Pietermaritzburg on the Donnybrook to Underberg and Greytown to Mount Alida branch lines, while some ended up at Nelspruit in the Eastern Transvaal Lowveld for service on the Graskop branch line. They were even tested on the South West Africa System.[1][2][3][8]

By October 1971, after more than four decades of service, all Greyville's Class GCAs had been withdrawn since they were no longer needed after completion of the South Coast line’s electrification. By 1973, the thirty-nine original members of the Class had dwindled to seven, all stationed at Mason's Mill in Pietermaritzburg, from where they still worked the light rail Underberg branch, often double-heading. By April of that year, however, the number had dropped to five. They were all withdrawn from service in October 1975. One of their last tasks was to work the track re-railing train which laid the heavier rails which enabled diesel-electric locomotives to finally replace them.[7][9]

Knuckle couplers

[edit]

In 1927, the SAR began to convert the couplers of its Cape Gauge rolling stock from the Johnston link-and-pin coupling system which had been in use since the establishment of the Cape Government Railways in 1873, to AAR knuckle couplers. Judging from contemporary photographs as well as the official SAR Locomotive Diagram Book and the dimensional locomotive drawings as published by Holland, which were for the most part based on the original as-delivered and unmodified loco­motives, the Class GCA locomotives were delivered new with knuckle couplers fitted, as were the Classes 18, GF, HF and U which also entered service in 1927.[1][4][5]

Transition era knuckle coupler

Conversion of all rolling stock would take several years and both coupler types could still be seen on rolling stock into the late 1950s. During the transition period, knuckle couplers on locomotives had a horizontal gap and a vertical hole in the knuckle itself to accommodate a link and a pin respectively. This enabled them to couple to vehicles which were still equipped with the older Johnston couplers.[1][4][5]

Knuckle couplers had first been used in South Africa more than two decades earlier. The Central South African Railways (CSAR) introduced Gould knuckle couplers on the rolling stock of its Limited Express and Imperial Mail passenger trains in 1904. The Limited Express operated between Pretoria and Johannesburg while the Imperial Mail operated between Pretoria and Cape Town. These knuckle-couplers also had split knuckles to accommodate coupling to the old Johnston couplers with a link and pin, since the CSAR retained the old couplers on all their locomotives to keep them compatible with their own goods and older passenger rolling stock as well as with that from the other railways it connected with.[10]

Preservation

[edit]
Number Works nmr THF / Private Leaselend / Owner Current Location Outside South Africa ?
2196 THF White River Station
2199 THF Krugersdorp Locomotive Depot
2621 THF Ingwe Municipality Creighton Station

Illustration

[edit]

References

[edit]
  1. ^ a b c d e f g h Holland, D. F. (1972). Steam Locomotives of the South African Railways. Vol. 2: 1910-1955 (1st ed.). Newton Abbott, England: David & Charles. pp. 52–54. ISBN 978-0-7153-5427-8.
  2. ^ a b c d e Espitalier, T.J.; Day, W.A.J. (1946). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, January 1946. pp. 12-13.
  3. ^ a b c d e f Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 90. ISBN 0869772112.
  4. ^ a b c d South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 30.
  5. ^ a b c d South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 30.
  6. ^ Hamilton, Gavin N., The Garratt Locomotive - Garratt Locomotives from Other Builders, retrieved 10 November 2012
  7. ^ a b Durrant, AE (1989). Twilight of South African Steam (1st ed.). Newton Abbott: David & Charles. p. 110. ISBN 0715386387.
  8. ^ Soul of A Railway, System 6, Part 2: Greyville Loco, Greyville Station to Umgeni & Berea Road to Rossburgh. Caption 22. Archived 2 February 2017 at the Wayback Machine (Accessed on 26 November 2016)
  9. ^ Soul of A Railway, System 6, Part 1: Durban Old Station. Caption 69. Archived 24 October 2020 at the Wayback Machine (Accessed on 8 March 2017)
  10. ^ Soul of A Railway, System 8, Part 1: Pretoria: including local services, workshops and running sheds, Part 1. Captions 8, 13. Archived 19 March 2017 at the Wayback Machine (Accessed on 15 March 2017)