Uranium(III) chloride
Names | |
---|---|
IUPAC name
Uranium(III) chloride
| |
Other names
Uranium chloride
Uranium trichloride Hypouranous chloride | |
Identifiers | |
3D model (JSmol)
|
|
ChemSpider | |
PubChem CID
|
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
UCl3 | |
Appearance | Green crystalline solid |
Density | 5.500 g/cm3, liquid |
Melting point | 837 °C (1,539 °F; 1,110 K) |
Boiling point | 1,657 °C (3,015 °F; 1,930 K) |
Soluble | |
Structure | |
Hybridisation | Tricapped trigonal prismatic |
Hazards | |
Flash point | Non-flammable |
Non-flammable | |
Related compounds | |
Related compounds
|
Uranium(IV) chloride, Uranium(V) chloride, Uranium(VI) chloride |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Uranium(III) chloride, UCl3, is a water soluble salt of uranium. UCl3 is used mostly to reprocess spent nuclear fuel. Uranium(III) chloride is synthesized in various ways from uranium(IV) chloride; however, UCl3 is less stable than UCl4.
Preparation
[edit]There are two ways to synthesize uranium(III) chloride. The following processes describe how to produce uranium(III) chloride.
(1) In a mixture of NaCl-KCl at 670–710 °C, add uranium tetrachloride with uranium metal.
(2) Heat uranium(IV) chloride in hydrogen gas.
Properties
[edit]In solid uranium(III) chloride each uranium atom has nine chlorine atoms as near neighbours, at approximately the same distance, in a tricapped trigonal prismatic configuration.[3]
Uranium(III) chloride is a green crystalline solid at room temperature. UCl3 melts at 837 °C and boils at 1657 °C. Uranium(III) chloride has a density of 5500 kg/m3 or 5.500 g/cm3.
Its composition by weight:
- Chlorine: 30.84%
- Uranium: 69.16%
Its formal oxidative states:
- Chlorine: −1
- Uranium: +3
This salt is very soluble in water and is also very hygroscopic. UCl3 is more stable in a solution of hydrochloric acid.[4]
Uses
[edit]Reagent
[edit]Uranium(III) chloride is used in reactions with tetrahydrofuran (THF) and sodium methylcyclopentadiene to prepare various uranium metallocene complexes.[5]
Catalyst
[edit]Uranium(III) chloride is used as a catalyst during reactions between lithium aluminium hydride (LiAlH4) and olefins to produce alkyl aluminate compounds.[6]
Molten form
[edit]Molten uranium(III) chloride is an important component of liquid nuclear fuel used in molten-salt reactors. Neutron scattering and computational studies point to the presence of unusual heterogeneous bonding environment around U(III) at high temperatures, with distinct inner- and outer-coordination subshells.[7] The molten form of uranium(III) chloride is also a typical compound in pyrochemical processes as it is important in the reprocessing of spent nuclear fuels.[8] UCl3 is usually the form that uranium takes as spent fuel in electrorefining processes.[8][9]
Hydrates
[edit]There are three hydrates of uranium(III) chloride:
- UCl3.2H2O.2CH3CN
- UCl3.6H2O
- UCl3.7H2O
Each are synthesized by the reduction of uranium(IV) chloride in methylcyanide (acetonitrile), with specific amounts of water and propionic acid.[10]
Precautions
[edit]While there are no long-term data on the toxic effects thas UCl3, it is important to minimize exposure to this compound when possible.
Similar to other uranium compounds that are soluble in water, UCl3 is likely absorbed into the blood through the alveolar pockets of the lungs within days of exposure. Exposure to uranium(III) chloride leads to toxicity of the renal system.[11]
References
[edit]- ^ Serrano, K.; Taxil, P.; Dugne, O.; Bouvet, S.; Puech, E. J. Nucl. Mater. 2000, 282, 137–145.
- ^ Remsen, Ira. Inorganic Chemistry. New York: Henry Holt and Company, 1890.
- ^ Wells A.F. (1984) Structural Inorganic Chemistry 5th edition Oxford Science Publications ISBN 0-19-855370-6
- ^ Comey, Arthur M.; Hahn, Dorothy A. A Dictionary of Chemical Solubilities: Inorganic. New York: The MacMillan Company, 1921.
- ^ Brenna, J.G.; Anderson, R.A.; Zalkin, A. Inorg. Chem. 1986, 25, 1756–1760.
- ^ Le Marechal, J.F.; Ephritikhine, M.; Folcher, G. J. Organomet. Chem. 1986, 309, C1–C3.
- ^ Dmitry S. Maltsev, Darren M. Driscoll, Yuanpeng Zhang, Joerg C. Neuefeind, Benjamin Reinhart, Can Agca, Debmalya Ray, Phillip W. Halstenberg, Mina Aziziha, Juliano Schorne-Pinto, Theodore M. Besmann, Vyacheslav S. Bryantsev, Sheng Dai, Santanu Roy, and Alexander S. Ivanov. Journal of the American Chemical Society 2024 146 (31), 21220-21224.DOI:10.1021/jacs.4c05765. https://pubs.acs.org/doi/full/10.1021/jacs.4c05765
- ^ a b Okamoto, Y.; Madden, P.; Minato, K. J. Nucl. Mater. 2005, 344, 109–114.
- ^ Okamoto, Y.; Kobayashi, F.; Ogawa, T. J. Alloys Compd. 1998, 271, 355–358.
- ^ Mech, A.; Karbowick, M.; Lis, T. Polyhedron. 2006, 25, 2083–2092.
- ^ Bertell, Rosalie. "Gulf War Veterans and Depleted Uranium." May 1999. Available: http://ccnr.org/du_hague.html
External links
[edit]- Uranium(III) chloride information at Webelements
- Uranium(III) chloride International Bio-Analytical Industries, Inc.
- Depleted Uranium: All the Questions about DU and Gulf War Syndrome are Not Yet Answered