Toyota Crown

For the unrelated fleet sedan model sold as the "Crown Comfort" and "Crown Sedan" from 1995 to 2018, see Toyota Comfort.

For the unrelated mid-size crossover SUV model sold in China as the "Crown Kluger" since 2021, see Toyota Crown Kluger (XU70).

For the unrelated minivan model sold in China as the "Crown Vellfire" since 2021, see Toyota Crown Vellfire (AH30).

Toyota Crown
2018–2019 Toyota Crown 3.5 Hybrid RS Advance (GWS224, Japan)
Overview
Manufacturer	Toyota
Production	1955–present
Assembly	Japan: Toyota, Aichi (Honsha plant: 1955–1959; Motomachi plant: 1959–present; Tsutsumi plant: 2022–present) Australia: Port Melbourne (Australian Motor Industries: 1967–1980) New Zealand: Christchurch (Steel's Motor Assemblies: 1973–1980) China: Tianjin (TFTM: 2005–2020) Indonesia: Jakarta (1976–1983; 1987–2000) Philippines: Parañaque (1967–1984; 1989–1997); Santa Rosa, Laguna (1997–1999)
Body and chassis
Class	Mid-size luxury car (E)
Body style	4-door notchback sedan (1955–present) 4-door hardtop sedan (1974–1999) 4-door fastback sedan (2022–present) 2-door hardtop coupe (1967–1983) 3/5-door wagon (1955–2007) 5-door SUV (2023–present) 2-door coupe utility (pickup, 1962–1971)
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive (1995–present)
Related	Toyota Crown Majesta (1991–2020) Lexus GS (1991–2011)
Chronology
Successor	Toyota Corona Mark II (North America, for S60/S70 model) Toyota Avalon (XX50) (China, for S210 model) Toyota Soarer (hardtop coupe)

The Toyota Crown (Japanese: トヨタ・クラウン, Hepburn: Toyota Kuraun) is an automobile which has been produced by Toyota in Japan since 1955. It is primarily a line of mid-size luxury cars that is marketed as an upmarket offering in the Toyota lineup.

In North America, the first through fourth generations were offered from 1958 through 1972, being replaced by the Corona Mark II. The Crown nameplate returned to the North American market in 2022, when the sixteenth-generation model was released. The Crown has also been partially succeeded in export markets by its closely related sibling, the Lexus GS, which since its debut in 1991 as the Toyota Aristo has always shared the Crown's platform and powertrain options. Later models of the GS and Crown have taken on a very strong aesthetic kinship through shared design cues.

In 2022, Toyota unveiled four different Crown models to replace the fifteenth-generation model. The first model that is available is the Crossover-type Crown, which is also marketed in North America as the sole Crown model. The remaining three models: Sedan, Sport, and Estate, will be released in 2023 and 2024 respectively, and will be available in hybrid, plug-in hybrid, and fuel cell powertrains depending on the model.

History

Toyota Crown logo used between 2003 and 2018.

Introduced in 1955 as the Toyopet Crown, it has served as the mainstream sedan from Toyota in the Japanese market throughout its existence and holds the distinction of being one of the longest-running passenger-car nameplate affixed to any Toyota model. Its traditional competitors in Japan and Asia were the defunct Nissan Cedric/Gloria/Fuga, Honda Legend, Mazda Luce, Isuzu Bellel and Mitsubishi Debonair.

Formerly only available at Toyota Store dealers in Japan, the Crown has been popular for government usage, whether as a police car or for transporting government officials. It has also been popular with Japanese companies as company cars along with use as a taxicab. While a base Crown was available for many years aimed at the taxicab market, the increasing opulence and price of the Crown line led to the creation of the Comfort in 1995 as a more affordable alternative. Outside Japan, the larger Lexus LS took over the role of Toyota's flagship sedan in 1989 in the company's global lineup.

Toyota's "Discover Crown Spirit Project" is a program in which Japanese Toyota dealers fully restore instances of every generation of the Crown to show that even the oldest Crown still works.

Having been in production since 1955, the Crown is Toyota's second longest running model nameplate in Japan after the Land Cruiser, and seventh in the world after the Mercedes-Benz S-Class (1954), Chevrolet Corvette (1953), Land Cruiser and Nissan Patrol (both 1951), Volkswagen Transporter (1950), Ford F-Series (1947), and Chevrolet Suburban (1935).

Exports

The Crown was first exported to the United States from 1958 to 1973 as the first model Toyota exported to the country. In 1960, Toyota temporarily suspended exports to the region as the Crown was not capable of speeds needed on American freeways, before introducing an improved model. The Crown was also exported to Canada from 1964 to 1972, and Mexico from 1959 to 1964.

Exports to Europe began in 1964 with the first cars going to Finland. Other European countries which saw early imports of the Crown included the Netherlands and Belgium. The United Kingdom was another European market until the early 1980s. Australia was another important export market for the Crown – to the extent that it was manufactured there from the mid-1960s until the late 1980s using many local components. It was discontinued when the button car plan was put into effect.

Exports to New Zealand began in 1968 and local CKD kit assembly of the Deluxe sedan started in 1973 (under contract at Steel's Motor Assemblies in Christchurch alongside the Corona). The model was replaced in NZ assembly by the Cressida in 1979 though limited imports of Japanese assembled cars continued for several more years.

The island nations of Aruba and Curaçao in the Southern Caribbean also imported the Crown starting from the second generation (S40) in 1965 in Curaçao up until importation of the tenth generation (S150). It was discontinued in 1998 due to the high price and low demand combined with the introduction of the Lexus GS series.

In 2019, a small number of fifteenth-generation Crowns were exported to Indonesia for use as an official vehicle by cabinet ministers and other government officials.

The sixteenth-generation Crown that was introduced in 2022 will be exported to about 40 countries with an expected annual sales volume of around 200,000 units.

Toyopet Crown – First generation (RS/S10/S20/S30; 1955)

Toyopet Crown – First generation
Overview
Model code	RS S10 S20 S30
Also called	Toyopet Masterline (commercial models)
Production	January 1955–1962
Assembly	Japan: Koromo plant (now Honsha plant: 1955–1958) Motomachi plant (1959–1962)
Designer	Kenya Nakamura
Body and chassis
Body style	4-door sedan 2/4-door station wagon
Layout	Front-engine, rear-wheel-drive
Related	Toyopet Master Toyopet Master Ribbon
Powertrain
Engine	1,453 cc R I4 (RS, RS20) 1,897 cc 3R I4 (RS30) 1,491 cc C diesel I4 (CS20) 3,386 cc B I6 (Patrol Car/Ambulance) 3,878 cc F I6 (Patrol Car/Ambulance)
Dimensions
Wheelbase	2,530 mm (99.6 in)
Length	4,285 mm (168.7 in)
Width	1,679 mm (66.1 in)
Height	1,524 mm (60.0 in)
Curb weight	1,152–1,216 kg (2,540–2,681 lb)

The Crown was introduced in January 1955 in Japan to meet the demands of public transportation. The Crown was intended for private purchase, while the Master served in a commercial form as a taxi, both with the same 1.5 L Type R engine used on their previous car, the Toyopet Super. The front doors open conventionally, and the rear doors are "suicide doors", a feature also utilized on the Toyota AA, Toyota's first car. Small engine displacements were used to keep the vehicle affordable, as the Japanese government began to impose an annual road tax to help develop and maintain a national transportation infrastructure in 1950. The appearance of the Crown shows some similarities with the European Ford Versailles and Simca Vedette. The Toyota Patrol was a police car version of the 1955 Crown. It featured many differences from the standard car, including a more reinforced chassis with the more powerful 6-cylinder 3.4 L engine from the Toyota BX truck. In a similar way, an ambulance based on the Crown was also built. In 1956, both of these vehicles were upgraded to the F 3.9 L engine and remained in production until 1959.

The Crown was much more popular than the Master due to the more compliant suspension of the Crown, and while the Master was intended for taxi service, the Crown was more accepted by the market over the Master, and more Crowns were sold into taxi service than the Master. The Crown was designed to replace the Super but Toyota was not sure if its independent front coil suspension and its suicide type rear doors were too radical for the taxi market to bear. So the Super was updated, renamed the Master and sold in tandem to the Crown, at Toyota Store locations. When sales of the Crown proved worthwhile, the Master was discontinued in November 1956 after being in production for only one year, and production facilities for the Master were transferred to the Crown. While the Master was discontinued the commercial vehicle based thereon, the Masterline, continued to be offered (utilities, wagons and vans) until 1959. A six-door wagon known as the Airport Limousine was shown as a concept car at the 1961 Tokyo Motor Show. It did not go into production.

In December 1955, the Crown Deluxe (RSD) was introduced, a posher model equipped with a radio and heater as standard. The initial RS model received a cosmetic update in 1958 to become the RS20, now with hooded headlights and a single-piece front windshield. In October 1959, Japan's first diesel-engine passenger car, the Crown Diesel, was introduced. Its C-series engine only had 40 PS (29 kW). In October 1960, the 1.5 L R engine was complemented by the larger 1.9 L (1,896 cc) 3R engine for a model called the RS30, originally only available in the Deluxe version. The 1900 was also available with the new two-speed Toyoglide automatic transmission. In April 1961, a Crown Standard 1900 was added.

Its coil and double wishbone independent front suspension was a departure from the leaf sprung beam axle front suspension used on most previous models but was similar to the independent front suspension used on the 1947 Toyopet SA. The live axle rear suspension was similar to that used on most of the previous models (unlike the trailing arm rear suspension used on the SA). Taxi versions were produced and beginning in March 1959 commercial versions of the vehicle were also available, as an estate wagon and a three- or six-seat coupe utility. These took over the "Toyopet Masterline" name in the Japanese domestic market, but usually received "Crown" badges in the export. The "Crown" name was previously in use by the Imperial limousine manufactured by Chrysler in the early 1950s.

In 1958, it introduced a ball joint suspension. Production of the double-cab Masterline pickup (RR19) started in April 1957 by the former Central Motors.

In August 1957, three Toyota delegates with the intent to establish a sales company in the United States introduced a white and black Crown and Crown Deluxe at a public relations event attended by dealers and the media. Both models were constructed with 50% thicker steel than the average American car at the time and the black Deluxe model was nicely appointed with lots of chrome and luxurious items like a radio, heater and whitewall tires which prompted the press to liken it to a "baby Cadillac". This promising initial showing along with the strong reputation of the Crown in Japan gave Toyota the confidence to pursue exports to the United States despite known high-speed performance issues. As a publicity stunt to demonstrate the car's reliability, Toyota staged a campaign common to American automakers: a coast-to-coast endurance run from Los Angeles to New York. The Toyopet was barely able to limp into Las Vegas before the project had to be called off.

Toyota's first export to the United States began with 30 Crown Deluxes in June 1958 after establishing Toyota Motor Sales USA the previous October, the first directly managed retail dealer (Hollywood Toyota) the previous February, U.S. wholesale and import companies, and a parts warehouse in Long Beach. Toyota also signs up 45 dealers to sell cars in its initial year, growing to 70 dealers by 1960 and 90 by 1962. In the effort to obtain certification from the California Highway Patrol for the sale of the Crown in California, Toyota shipped the cars without headlights and installed General Electric sourced sealed beam units upon arrival which met the required standard for brightness.

Since the car was designed for the muddy, slow, unpaved Japanese roads, it failed the mass urban landscape of the US because of its inability to keep up with traffic on the faster interstate highways, along with stability, noise and vibration concerns. The car was also very rigid and heavy for its size at 2700 pounds. Motor Trend reported "The Toyopet is so rigid that jacking up one wheel at the rear bumper quickly lifted the other rear wheel". They also observed an average of 23.5 mpg combined city/highway for 407 miles. To remedy the performance issues along with the resulting breakage of parts from being overly stressed, Toyota introduced the newer RS22L and the RS32L series Crown with the larger 3R engine and other improvements for high-speed driving in July 1960.

For 1958, Toyota introduced the Crown in sedan form only (Standard and Deluxe) with a base price of US$2,187 (equivalent to about $23,096 in 2023). Options included $94 AM radio and $75 whitewall tires. By comparison, an optioned up Crown was $32 more than the base Chevy Del Ray and $10 more than the Rambler Rebel V8 sedan. Total sales for the initial year were 287. For 1959, sales were again limited to only sedan models and despite a price boost to $2,329 for the Deluxe model, sales more than tripled to 967 units. For 1960, Toyota added a wagon body style ($2,111 for the two-door, $2,211 for the four-door) but in the midst of Detroit's Big Three compact cars (Ford Falcon, Chevy Corvair and Plymouth Valiant), sales fell to 659 units. For 1961, the Crown was being sold with the newer 3R engine and alongside the new smaller Tiara model with the Crown's outgoing 1.5L engine. Only the Custom sedan and wagon were offered ($1,795 and $2,080 respectively). Total sales for 1961 reached only 225 units, trailing off to 74 for 1962, and finally 28 for 1963. Total sales for the Toyopet Crown RS series in the United States is 2,240.

By the end of 1960, Toyota Motor Sales USA had accumulated 1.42 million dollars in losses from lackluster sales of the Crown. To prevent any further loss, all passenger car imports were suspended and new management structures were established to refocus all sales efforts on the Toyota Land Cruiser with profitability expected from selling 50 to 60 per month until the development of a new car suitable for the US market.

In November 2000, Toyota released the Origin, a retro version of the RS series Crown to celebrate 100 million vehicles having been built in Japan.

Gallery

• 
  1955 Toyopet Crown
• 
  1957 Toyopet Crown
• 
  1958 Toyopet Crown
• 
  1960 Toyopet Crown
• 
  1961 Toyopet Crown
• 
  1962 Toyopet Crown
• 
  Toyopet Masterline (rear)
• 
  1962 Toyopet Crown 1900 3R I4 (RS30)

Toyopet Crown – Second generation (S40; 1962)

Toyopet Crown – Second generation
1967 Toyota Crown sedan (MS45, Australia)
Overview
Model code	S40
Also called	Toyota Crown
Production	1962–1967 February 1967–unknown (Australia)
Assembly	Japan: Toyota City (Motomachi plant number 1) Australia: Port Melbourne
Body and chassis
Body style	4-door sedan 4-door station wagon 2-door coupe utility
Layout	Front-engine, rear-wheel-drive
Related	Toyopet Masterline
Powertrain
Engine	1.9 L 3R I4 2.0 L M I6 2.3 L 2M I6
Transmission	3-speed manual 4-speed manual 2-speed Toyoglide automatic
Dimensions
Wheelbase	2,690 mm (105.9 in)
Length	4,610 mm (181.5 in) 4,688 mm (184.6 in) (wagon)
Width	1,695 mm (66.7 in) 1,670 mm (65.7 in) (wagon)
Height	1,460 mm (57.5 in)
Curb weight	1,265 kg (2,789 lb) 1,354 kg (2,985 lb) (wagon)

Due to the introduction of the Corona, the dramatically restyled and enlarged Series S40 was launched in 1962, and saw the introduction of the Custom model. The front grill approach has a similar appearance to the 1960 Imperial Crown (Chrysler), which speaks to Toyota's aspirations that the Crown be a large, comfortable sedan. The station wagon body style carried over from the previous generation Masterline, but with more attention to the luxurious approach used on the Crown.

The stylized "crown" badge, affixed to the grille and hubcaps, first appeared with this generation.

Headlights were integrated within the boundaries of the greatly enlarged grill, providing a clean, modern appearance. A 2-speed automatic transmission was introduced, called Toyoglide, with a column shift. A bigger and better car than the previous S30 series, it initially had four-cylinder R-series engines before the addition of the "M" six-cylinder engine in 1965. Deluxe and Super Deluxe models were available with added features. The ladder frame chassis of the previous generation was replaced with an X-frame to achieve a lower centre of gravity. The sedan and wagon were known simply as the Crown while the commercial vehicles (coupe utility, double cab coupe utility (pick ups), and van) were known as the Masterline. There was also a limited run of the sedan known as the Toyota Crown S (MS41S) which featured twin SU style carburettors on the 2.0L M in-line-six engine, sportier camshaft, sports instrumentation, sports suspension, four-speed floor shift, bucket seats, 14 inch wheels, disc brakes on the front and larger drum brakes in the rear.

This Crown became the first Toyota to be exported to Europe, after the head of Denmark's Erla Auto Import A/S saw it at the Tokyo Motor Show. They brought in 190 of these subsequent to a May 1963 agreement. In Canada, it was introduced in November 1964 as one of the first Toyota models available in the country alongside the UP10 Publica. In the US, the MS41L sedan was available in the US for US$2,305 (equivalent to about $23,217 in 2023) PoE while the MS46LG station wagon was available for US$2,525 (equivalent to about $25,433 in 2023) PoE. Some optional features include an automatic transmission for US$160 (equivalent to about $1,612 in 2023) and a radio for US$60 (equivalent to about $604 in 2023).

A two-door Crown Convertible was displayed at the 1963 Tokyo Motor Show, based on the Crown 1900 sedan. It was not put into production.

This Crown generation was the first to be assembled in Australia, from CKD kits, by AMI in Port Melbourne, with significant local content. AMI, which assembled numerous brands including Triumph and, for a short time, Mercedes-Benz, was to become the basis of Toyota's current Australian manufacturing operation.

• 
  S40 Toyopet Crown Sedan
• 
  S40 Toyopet Crown Wagon
• 
  Toyopet Masterline coupe utility (pick up)

Crown Eight (G10)

Toyota Crown Eight
Overview
Model code	G10 VG10
Production	April 1964 – July 1967
Assembly	Japan: Yokosuka (Kanto Auto Works)
Body and chassis
Class	Full-size luxury car (F)
Body style	4-door sedan
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	2.6L (2599cc) V V8
Transmission	3-speed manual 2-speed Toyoglide A20 automatic
Dimensions
Wheelbase	2,740 mm (108 in)
Length	4,720 mm (186 in)
Width	1,845 mm (72.6 in)
Height	1,460 mm (57 in)
Curb weight	1,375 kg (3,031 lb)
Chronology
Successor	Toyota Century

The longer, wider, and more upmarket Crown Eight was introduced in 1964 for the Japanese market, powered by a 2.6 L V8 engine. However, it had a different model designation, G10 (VG10 when fitted by 2.6 L V engine). The car was first introduced at the 1963 Tokyo Motor Show and introduced for sale on April 20, 1964, nine days before Emperor Showa's birthday and the beginning of Golden Week in Japan. While it was essentially a wider S40 Crown, it was branded as a "Toyota" and not "Toyopet".

The Toyota Crown Eight was a significant project for Toyota, developed and assembled by their subcontracting company, Kanto Auto Works. Toyota delegated the production to Kanto Auto Works due to the Crown Eight's unique components, which could have hindered mass-production operations at the Motomachi plant. Despite its production volume of approximately 1,000 cars per year, the Crown Eight's impact on Toyota products paved the way for future innovations and designs.

The Crown Eight was designed to replace full-sized American automobiles commonly used by major corporations. The Crown Eight represents the first Japanese mass-produced vehicle with an 8-cylinder engine. The main rivals at the time were the Prince Grand Gloria, Mitsubishi Debonair, and Nissan Cedric Special, all equipped with a six-cylinder engine. It was the first Crown to exceed vehicle size classification regulations in length, width, and engine displacement capacity. The width at 1,845 mm (72.6 in) compares to the Century at 1,890 mm (74 in). The width was so that the front and rear bench seats, upholstered in silk brocade, could accommodate six passengers. The front seat could be electrically adjusted in six directions, and the front seatback could be reclined horizontally to be flat to the rear seat, while the rear seat included a center folding armrest.

The Crown Eight was considered as a possible submission for use by the Japanese Imperial Household Agency as a car to be used by senior members of the Imperial House of Japan, but it lost out to the Nissan Prince Royal. The Crown Eight was replaced in 1967 by the Century VG20. Approx 3,800 Crown Eights were produced. Some of the items that were exclusive to the Crown Eight were climate control, automatic headlamps, electrically powered windows, electric cruise control, and a two-speed "Toyoglide" automatic transmission. Vent windows were installed on all doors, separate from the side windows, and could be opened or closed electrically. The front and rear door latches were electromagnetic and installed on the Crown Eight successor, the Century. Unlike a conventional door handle, the door latch would release by touching the interior switch. The front suspension used a double wishbone suspension with coil springs and the rear used a trailing arm suspension with coil springs, with shock absorbers for all wheels. The Crown Eight was available in four exterior colors: Royal Bronze Metallic, Sherwood Olive Metallic, Black, and Victoria Blue Metallic.

Toyopet Crown – Third generation (S50; 1967)

Toyopet Crown – Third generation
Toyota Crown Super Deluxe (S50, Japan)
Overview
Model code	S50
Also called	Toyota Crown
Production	1967–1971
Assembly	Japan Australia: Port Melbourne (AMI)
Body and chassis
Body style	4-door sedan 4-door station wagon 2-door coupé 2/4-door coupé utility
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	1,994 cc 5R I4 1,988 cc M I6 2,253 cc 2M I6
Transmission	3-speed manual (optional O/D) 4-speed manual 2-speed automatic 3-speed automatic
Dimensions
Wheelbase	2,690 mm (105.9 in)
Length	4,665 mm (183.7 in) sedan 4,585 mm (180.5 in) hardtop 4,690 mm (184.6 in) wagon
Width	1,690 mm (66.5 in)
Height	1,445 mm (56.9 in) sedan 1,465 mm (57.7 in) wagon
Curb weight	1,305–1,410 kg (2,877–3,109 lb)

Launched in 1967, the mechanicals were much the same as the previous generation, but additional equipment was included. The X-frame chassis of the S40 series was now dropped in favour of a perimeter frame that improved collision protection for passengers; this chassis design would remain in use until 1999 when the S130-series wagons were superseded by the unibody S170-series Estates. Higher specification models used the 2.0-liter M engine or the 2.3-liter 2M engine shared with the Toyota 2000GT sports coupe. A premium level Super Saloon joined the Super Deluxe model, and was available with the 2M engine including twin carburettors, electric windows, rear seat radio controls, air conditioning and luxury fabric on the seating including the Crown logo embossed into the vinyl. Lower specified models were equipped with the R-series four-cylinder engines. Crown vehicles meant for commercial use had received the Masterline nameplate until the introduction of this generation; they were now badged "Crown" as well. However, this generation was the last to be offered in an entire line of commercials - from the next generation on, the only commercial-use model available was the Crown Van, whose bodywork was also used for the Wagon models. Crown Double-Cab pickups were produced by the former Central Motor Co., Ltd. until December 1970.

When the 1967 S50 series Crown was introduced to Japan, television commercials used Japanese actor Satoshi Yamamura, who among his many roles on stage, movie, and television, portrayed Fleet Admiral Isoroku Yamamoto in the 1970s movie Tora! Tora! Tora! Yamamura would serve as the Crown spokesman for 16 years, introducing subsequent new generations of Crown products until 1983.

The Crown range now included the four-door station wagon, pick-up (rare), double cab pick-up (very rare), and in October 1968, the new two-door hardtop "personal luxury car."

In September 1968 the option of power steering was added. In 1969 the Crown received a facelift for the headlight, grill and trim arrangement. The Crown S used the two-liter 'six', but due to sportier tuning it produced more power than the larger 2M, 125 PS (92 kW) at 5,800 rpm versus 115 PS (85 kW) at 5,200 rpm. The commercial versions were fitted with the six-cylinder "M" engine (M-C) produce 105 PS (77 kW), while the four-cylinder 5R had to make do with 93 PS (68 kW). This generation was the only one to use a double-hinged tailgate, as the next generation converted to an overhead-lifting hatchback door.

Crowns that were equipped with the 2,253 cc 2M engine were no longer classified as compact cars under Japanese vehicle size classification regulations, even though the length and width were still in compliance. Toyota offered the larger engine so that buyers who were traditionally served by the Crown could now choose the all-new Corona Mark II in 1968. This allowed Toyota to reposition the Crown as the top level privately available luxury sedan, with much nicer interior treatments, more spacious accommodations. This was the last generation for the pick-up versions of the Crown, as load carrying was ceded to the new Toyota Hilux in February 1971.

Australian market models were assembled in Australia by Australian Motor Industries. The two-door ute was also assembled in Australia, but not the coupé model. This generation was imported fully assembled into New Zealand from 1968 to 1971.

This generation was still sold in the United States; 1970 was the most successful year for the nameplate in the US with 6,528 being sold.

Notable features on the Crown Wagon were:

• 7- or 8-passenger seating (two on front buckets or three on a bench seat, three on a rear bench seat, and two on a fold up cargo seat),
• a powered rear window,
• a side-swing tailgate.

• 
  Crown S50 Hardtop
• 
  Crown S50 Utility Pick-up
• 
  Crown S50 Station Wagon
• 
  1969 Custom Wagon, showing side hinged tailgate
• 
  1969 Crown Double Cabin
• 
  Toyota Crown Super Saloon interior

Fourth generation (S60/S70; 1971)

Fourth generation
1973–1975 Toyota Crown SE sedan (MS65, Australia)
Overview
Model code	S60 S70
Production	February 1971–September 1974
Assembly	Japan Australia New Zealand
Body and chassis
Body style	4-door sedan 5-door station wagon/van 2-door hardtop
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	1994 cc 5R I4 (RS60/66V) 1988 cc M I6 (MS60/62/66V/70) 2253 cc 2M I6 (MS64/67V) 2563 cc 4M I6 (MS65/68V/75)
Transmission	3/4/5-speed manual 3-speed automatic
Dimensions
Wheelbase	2,690 mm (105.9 in)
Length	4,680 mm (184.3 in)
Width	1,690 mm (66.5 in)
Height	1,420 mm (55.9 in)
Curb weight	1,290–1,360 kg (2,844–2,998 lb)

Launched in February 1971 for the Japanese Domestic Market, the fourth generation Crown was available in ascending trim levels, including Deluxe, Super Deluxe and Super Saloon. Another trim, Royal Saloon, introduced with the Crown's 1973 facelift, added luxury features from the Century limousine. The first two model years of the fourth generation Crown were marketed in North America; subsequently replaced by the Corona Mark II.

The 4M 2600 engine was introduced, with the 2.0-liter 5R inline-four engine and the 2.0-liter M six-cylinder engine also available. As for the previous generation, the M-C engine (in Japanese specifications) has 105 PS (77 kW; 104 bhp), while the 5R's output increased somewhat to 98 PS (72 kW; 97 bhp). In some markets the previous 2.3-liter "2M" six remained available, in sedan or "utility wagon" forms.

The Utility Wagon was a body style between commercial and passenger car, and carried chassis codes MS67V until the early 1973 facelift when it was replaced by the MS68V with the 2.6 engine.

While previous generations of the Crown had been marketed under the Toyopet brand, the fourth-generation model was the first version to be officially marketed worldwide as the Toyota Crown.

The Sedan and Wagon (Custom) were coded RS60/MS60/MS64/MS65 and MS62/MS63, while the Van was coded MS66V with the two liter "six". The Hardtop Coupé is MS70 (2.0-liter), or MS75 (2.6-liter). The Japanese market Crown Custom (Wagon) was classified as a seven-seater. This generation was the first Crown marketed as a Toyota in Japan, as previous models were marketed as Toyopets. Also, in Japan, this model was known as the "whale" or "kujira" Crown.

In 1973, Japanese television commercials introduced Japanese actress Sayuri Yoshinaga as a co-spokeswoman, joining Satoshi Yamamura, and together they appeared in commercials until 1983.

Crown's for the Japanese Domestic Market Hardtop featured rectangular halogen headlights, and export models featured twin round headlights. All models featured flush bumpers, marketed by Toyota as "spindle-shaped."

The trunk could be opened remotely by turning the ignition key to the far left, and a floor-mounted button engaged the radio's signal seeking feature. A separate signal seeking feature was installed for rear seat passengers, installed behind the front seat facing the rear seat compartment. The 60-series Crown received a facelift in January 1973.

Australian models were assembled in Australia by AMI. It was available in New Zealand fully imported from 1971 to 1973, with local assembly beginning at Steels Motor Assemblies, who also built the Corona, not long before the mid-life facelift, improving availability. Steels subsequently became Toyota NZ's Christchurch CKD assembly plant.

• 
  2600 Super Saloon Coupe (pre-facelift; UK)
• 
  2600 Super Saloon Coupe (pre-facelift; US)
• 
  Super Saloon sedan (Japan)
• 
  SE Sedan (facelift; Australia)
• 
  2600 Estate (facelift; UK)
• 
  2600 Estate interior

Fifth generation (S80/S90/S100; 1974)

Fifth generation
1978 Toyota Crown 2600 Deluxe (New Zealand)
Overview
Model code	S80 S90 S100
Production	October 1974–August 1979
Body and chassis
Body style	4-door sedan 4-door pillared hardtop sedan 4-door station wagon 2-door coupé
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	2.0 L 5R I4 2.0 L M I6 2.6 L 4M I6 2.2 L L diesel I4
Transmission	4/5-speed manual 3/4-speed automatic
Dimensions
Wheelbase	2,690 mm (105.9 in)
Length	4,765 mm (187.6 in) (Royal Saloon) 4,690 mm (184.6 in)
Width	1,690 mm (66.5 in)
Height	1,440 mm (56.7 in)
Curb weight	1,470–1,520 kg (3,241–3,351 lb)

Launched in 1974 in Japan, export began in 1975. It was offered as a four-door sedan, two-door hardtop coupe, four-door hardtop sedan, wagon, and van. Engines are 2.0- and 2.6-liter gasoline. The 2.2-liter diesel was introduced in October 1977. Trim levels are Standard, Deluxe, Super Saloon, and Royal Saloon. The all-new pillared hardtop with the Royal Saloon trim package was the most exclusive Crown and was an alternative to the Nissan Cedric and Nissan Gloria, the traditional cross-town rival, while both the Cedric and Gloria were offered as genuine hardtop sedans beginning August 1972. This was the last series to offer a one-piece front bench seat; consecutive series offered a split front bench.

Pre-facelift Toyota Crown Super Deluxe Sedan (Japan)

The Royal Saloon came in a longer body length, coupled with the 2.6 L engine, while lower trim levels were in the shorter body style and 2.0 L engines. Export models used the same body, whether the two-liter 5R four-cylinder or the 2.6-liter 4M inline-six. In Europe, these models claimed 87 and 112 PS (64 and 82 kW) respectively.

Facelift model Crown 2600 Super Saloon (Europe)

Minor change was given in 1978. This version of the Crown saw the introduction of disc brakes at both the front and rear axles with anti-lock brakes, speed sensitive power steering, and a 4-speed automatic transmission with overdrive. Originally, sedans and wagons had S80-series chassis numbers, while the two- and four-door hardtops received the S90-series chassis numbers. After 1976 and concurrent with the introduction of new stricter emissions regulations, all Japanese market Crowns used S100-series chassis numbers. Export models continued to use the previous codes.

Initially available with the "old style" 4M engine with a rounded valve cover, later models switched to the new 4M engine with a rectangular valve cover. This generation also saw the introduction of fuel injection on both the 2.6-liter 4M and the 2.0-liter M engines, coupled with Toyota's TTC-C technology, adding a catalytic converter to the exhaust system. The emissions-controlling technology badge helped identify which vehicles had reduced emissions tax liability. Select models with four-wheel disc brakes and twin-piston calipers on the front brakes were also available. The models installed with the diesel engine were exclusive to Toyota Diesel Store locations.

The Hardtop Sedan model has a front chrome grill and square headlights, but was no longer considered a true hardtop, due to the inclusion of a "B" pillar. The styling differences between the hardtop and sedan four-door models was that the side windows on the hardtop were frameless, and the rear window was sloped more than the formal appearing sedan. This series Crown in the Royal Saloon trim package exceeded length regulations of 4.7 m set forth by Japanese regulations by 65 mm, but Toyota continued to offer a 2.0 L engine in a shorter vehicle for buyers who were looking for better fuel economy over the larger six-cylinder engines, and reduced road tax liability.

New Zealand models were assembled in New Zealand but on an SKD basis - which meant it had more Japanese content (such as glass) than earlier CKD versions. It was the last Crown built in New Zealand and was replaced in 1979 by the Cressida (Mark II), which was available with a four-cylinder engine. The oil crises of 1973/4 and 1979/80 had led the government to impose a 60 percent sales tax on larger engines, and the Crown could no longer be priced to suit its market. This generation Crown was locally assembled in Australia (except for the imported "Super Saloon" trim), and only available with the largest 2.6-liter six-cylinder engine. It was never a strong seller in Australia, offering less performance and roadholding than the domestic competitors from Ford and Holden.

• 
  Pre-facelift Crown Sedan
• 
  Pre-facelift Crown Hardtop Super Saloon (MS85)
• 
  S90 series Crown coupé
• 
  S80 series Crown station wagon
• 
  Facelift Crown Hardtop Super Saloon Extra (MS105)
• 
  Facelift Crown Hardtop Super Saloon Extra (MS105)
• 
  S100 series Crown interior

Sixth generation (S110; 1979)

Sixth generation
Overview
Model code	S110
Production	1979–1983
Body and chassis
Body style	4-door sedan 4-door pillared hardtop sedan 4-door station wagon 2-door coupé
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	1994 cc 5R-U I4 1988 cc M-E I6 1988 cc M-PU LPG I6 1988 cc M-TEU turbo I6 1988 cc 1G-EU I6 2563 cc 4M I6 2759 cc 5M, E/GE I6 2188 cc L diesel I4 (LS110/117V) 2446 cc 2L-T/TE TD I4 (LS111)
Transmission	3/4-speed automatic 3/4/5-speed manual
Dimensions
Wheelbase	2,690 mm (105.9 in)
Length	4,860 mm (191.3 in) (Royal Saloon) 4,690 mm (184.6 in)
Width	1,715 mm (67.5 in) (Royal Saloon) 1,690 mm (66.5 in)
Height	1,410 mm (55.5 in)
Curb weight	1,500–1,610 kg (3,307–3,549 lb)

Launched in 1979, this model had the engine upgraded from the 2.6 L to 2.8 L 5M-EU model. The 2-liter M was still on offer along with a turbocharged version – the M-TEU. The carbureted 5M engine was also available in certain markets. In this series the model designation referred to the engine size – MS110 (2-liter), MS111 (2.6-liter), MS112 (2.8-liter). This was the last generation to install a four-cylinder, gasoline-powered engine. This model was the first generation Crown to be sold in Germany, beginning in 1980. The fuel injected 2.8 developed 145 PS (107 kW) in European trim, while the 2.2 diesel offered 66 PS (49 kW) and a choice of five-speed manual or an automatic (not in the Station Wagon). European sales started out at a respectable level, but with prices increasing at an alarming rate due to the appreciation of the yen, sales had dropped drastically by 1982.

Early models have twin rectangular headlights, while facelift models come with bigger monoblock headlights. Domestic market Royal Saloons use the large rectangular headlights. Lower grades Van and Taxi models adopted round headlights. Royal Saloon features longer bumpers and bigger engines, which were placed in a larger road tax classification according to Japanese government dimension regulations. The first Crown Turbo was launched in October 1980 for Japanese market only. Offering the 2.0 L engines was for buyers who didn't want to pay the large car tax, while offering better fuel economy than the larger engines. The turbo also provided a benefit in increasing fuel efficiency while reducing tailpipe emissions as Japanese consumers pay a tax on the amount of regulated substances being sent into the atmosphere from a Japanese law passed in the 1970s.

In some export markets, such as Southeast Asia, the larger six-cylinder engines came fitted with carburettors. In those specs, the 2.6 offered 110 PS (81 kW) SAE net while the 2.8 claimed 128 PS (94 kW) DIN or 120 SAE net. Sales in Indonesia were low and this generation was not replaced there in 1984, when the 120-series Crown appeared.

This generation is the last for the two-door hardtop coupé bodystyle, which was replaced by the Soarer. Reflecting a popular styling appearance during the 1970s, the coupé was fitted with a padded vinyl roof and "opera windows" for a luxurious appearance. Some of the options that became available were an Electronic compass, glass moon roof, power drivers seat, cruise control, electronic stereo tuner, and two-tone paint. Automatic climate control also appeared on this vehicle with separate controls installed for rear seat passengers as well as a rear-mounted mini fridge cooled by the separate rear seat air conditioning unit. The 2.4-liter turbo-diesel appeared in August 1982.

• 
  Crown Sedan 2.0 Standard (Taxi, Japan)
• 
  S110 series Crown hardtop coupé
• 
  S110 series Crown 4-door hardtop Super Saloon
• 
  S110 series Crown 4-door hardtop 2.8 Royal Saloon
• 
  S110 Crown station wagon
• 
  MS112 Crown interior
• 
  Facelift model Crown sedan

Seventh generation (S120; 1983)

Seventh generation
Toyota Crown Royal Saloon (S120, Japan)
Overview
Model code	S120
Production	1983–1987
Body and chassis
Body style	4-door sedan 4-door pillared hardtop sedan 4-door station wagon
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	2.0L 3Y/3Y-PU OHV I4 (YS120) 2.0L 1G-E I6 (GS120/126V) 2.0L 1G-GE DOHC I6 (GS121) 2.0L 1G-GZE DOHC S/C I6 (GS121) 2.0L M-E/M-PU I6 (MS120) 2.0L M-TE turbo I6 (MS120) 2.8L 5M/5M-E I6 (MS122) 2.8L 5M-GE DOHC I6 (MS123) 3.0L 6M-GEU DOHC I6 (MS125) 2.4L 2L diesel I4 (LS120/126V) 2.4L 2L-T/TE/THE turbo-diesel I4 (LS120)
Dimensions
Wheelbase	2,720 mm (107.1 in)
Length	4,860 mm (191.3 in) (Royal Saloon) 4,690 mm (184.6 in)
Width	1,720 mm (67.7 in) (Royal Saloon) 1,695 mm (66.7 in)
Height	1,400–1,515 mm (55.1–59.6 in)
Curb weight	1,410–1,875 kg (3,109–4,134 lb)

Launched in 1983, this model used all three versions of the 5M 2.8L engine: the carburetted 5M version, the single overhead cam (SOHC) multi-point fuel-injected 5M-E version, and the double overhead cam (DOHC) 5M-GE. Other engines included the 1G-GE 2.0L DOHC, M-TE 2.0L single overhead cam (SOHC) Turbo, M-E 2.0L SOHC, 2L-TE 2.4L SOHC Turbo Diesel Ceramics Power or 2.4L SOHC Diesel Ceramics Power engines. All 2.0 L engines were installed with T-VIS (Toyota Variable Induction System). In September 1985, a supercharged version of the 2-liter G-series six replaced the turbocharged M-series.

Base versions use the new 2-liter 1G-E engine which replaced the old 2-liter version of the M series. The Japanese market "van" version of the station wagon (the GS126V as well as the GS136V in the following series) used its own unique variant of this motor which took advantage of laxer emissions standards for commercial vehicles (the 1G-EJ). In Japan, taxi and commercial versions were also available with an LPG-powered four-cylinder engine (the 3Y) which was even offered with a three-speed, column-shifted manual. A gasoline-fueled version of this engine was available in some European and "general" export markets.

Toyota Crown Standard sedan with round headlights

S120 series Crown hardtop Royal Saloon

Rear of a 1984 Crown Royal Saloon 2.8i (Australia)

Crown Super Deluxe Van (New Zealand)

The lower-grade models were available with Toyota's F292 live axle rear suspension while the rest introduced 4-wheel independent suspension branded as PEGASUS (Precision Engineered Geometrically Advanced Suspension) on the Crown for the first time, with TEMS installed on the Royal Saloon sedan and hardtops, coupled with Toyota's ECT electronically controlled four-speed automatic transmission, and 4ESC anti-lock brakes.

The S120 was available in Hardtop sedan (frameless door glass), sedan and wagon versions but in two different exterior dimensions for length and width, with the Royal Saloon hardtop and sedan only offered in the larger body.

The top-trim package was called the Royal Saloon, followed by Super Saloon Extra, Super Select for hardtop bodystyles, followed by the Royal Saloon sedan, Super Saloon Extra sedan, and the wagon came only as Super Saloon Extra.

The Super Saloon Extra and Royal Saloon versions were packed with features such as dual-zone climate control, AM/FM cassette stereo with six acoustically matched speakers, combined with a separate rear cassette stereo with headphones, with dashboard-installed integrated CD player, and separate A/C and stereo control buttons installed in the rear armrest, parcel shelf mounted refrigerator, automatic headlights, reading lamps for all outboard seating positions, electrically adjusted tilt and telescoping steering column combined with a steering wheel and seat memory feature, glovebox mounted courtesy mirror among many things, while the slightly lower trim package Super Select was more modestly equipped.

One distinctive styling feature of this generation was the use of a clear panel with patterned backing for the C-pillar trim on the sedans. For the Japanese market only, Toyota made the 190 PS (140 kW) Twincam 12-valve 3.0-liter 6M-GE available on the Royal Saloon for the mid-cycle update. This engine is a popular swap for 5M-GE powered Supras and Cressidas of the same period.

This was the last generation Crown to be commonly available in European markets. The fuel injected 2.8-liter engine in European trim produces 170 PS (125 kW) at 5600 rpm and had identical specifications to the Supra sold there at the time. Swiss buyers, however, had to make do with the single-cam 140 PS (103 kW) 5M-E engine due to their particular emissions restrictions.

For general export markets such as Southeast Asia and the GCC countries, the carburetted 5M engine was also available. This version produces 128 PS (94 kW) at 5000 rpm and was even available with a four-speed manual transmission. For the even more frugal buyer, the carburetted OHV 3Y engine with 88 PS (65 kW) at 4600 rpm was also on offer.

Eighth generation (S130; 1987)

Eighth generation
Pre-facelift Toyota Crown 2.0i Super Saloon (GS131, Indonesia)
Overview
Model code	S130
Also called	Saibeijian Crown (China) Great Wall CC1020S (China)
Production	1987–1991 (pillared hardtop sedan) 1987–2000 (sedan) 1987–1999 (wagon/commercial van)
Body and chassis
Body style	4-door sedan 4-door hardtop sedan 5-door station wagon/van
Layout	Front-engine, rear-wheel-drive
Powertrain
Engine	Gasoline: 1988 cc 1G-E I6 (GS130/131/136V) 1988 cc 1G-FE I6 (GS130/131/136V) 1988 cc 1G-GE I6 (GS131) 1988 cc 1G-GZE supercharger I6 (GS130G/131) 2237 cc 4Y I4 (YS132) 2492 cc 1JZ-GE I6 (JZS130G/131) 2759 cc 5M I6 (MS132) 2759 cc 5M-E I6 (MS133) 2954 cc 7M-GE I6 (MS135/137) 2997 cc 2JZ-GE I6 (JZS133/135) 3968 cc 1UZ-FE V8 (UZS131) LPG 1998 cc 3Y-P/PE I4 (YS130) 1988 cc M-P I6 (MS130) 1988 cc 1G-GP I6 (GS130) Diesel 2446 cc 2L I4 (LS130/136V) 2446 cc 2L-T/TE/THE turbo-diesel I4 (LS130/131)
Transmission	4-speed manual 5-speed manual 4-speed automatic
Dimensions
Wheelbase	2,730 mm (107.5 in)
Length	4,690 mm (184.6 in) (narrow-body) 4,800 mm (189.0 in) (wide-body) 4,860 mm (191.3 in) (Royal Saloon G)
Width	1,695 mm (66.7 in) (narrow-body) 1,720–1,750 mm (67.7–68.9 in) (wide-body)
Height	1,400–1,450 mm (55.1–57.1 in) (sedan/hardtop) 1,515–1,550 mm (59.6–61.0 in) (wagon/van)
Curb weight	1,330–1,690 kg (2,932–3,726 lb)
Chronology
Successor	Toyota Crown Majesta (for Royal Saloon G)

Launched in 1987, it came in sedan, hardtop, and wagon body styles, including a van model for commercial uses. This model used the 7M-GE 3000 cc DOHC, 1G-GZE 2000 cc DOHC supercharger, 1G-GE 2000 cc DOHC, 1G-E 2000 cc, 2L-THE 2400 cc SOHC Turbo Diesel Hi-Power (automatics), 2L-TE 2400 cc SOHC Turbo Diesel (with manual transmission) or 2L 2400 cc SOHC naturally aspirated diesel engine. The 4.0-liter 1UZ-FE, the same engine as in Lexus LS400, later became available in the Royal Saloon G, which became the Toyota Crown Majesta with the next generation Crown. The air suspension-equipped Royal Saloon G was also available with the 3-liter inline-six engines and used double wishbone control arms to accommodate the airbags. Due to the different suspension, the Royal Saloon G carries a different model code (MS137 versus MS135 for the coil-sprung models). The better-equipped models receive an independent semi-trailing arm rear suspension, while the simpler versions (including all wagons and vans) have live rear axles located by trailing links. These versions receive different chassis numbers (GS130 versus GS131, for instance).

In 1988, it became the first Toyota available with an airbag.

Although a totally different chassis and body, the S130 shares styling cues with the X80 Cressida. In 1989, the top-level Royal Saloon G introduced the world's first CD-ROM-based automotive navigation system, with color CRT display. Also, TRC traction control and electronically controlled shock absorbers called TEMS (shared with the first generation Toyota Soarer) were adopted. This Crown was sold only in Japan, the Middle East, the Caribbean, and select Asian markets. Some export markets received the older 2.8 liter SOHC inline-six, either carburetted or fuel injected. For general countries, only with left-hand drive and a four-speed manual transmission, the 2.2-liter inline-four 4Y engine was also available.

In September 1988, a narrow-angle twin-cam version of the two-liter inline-six engine (the 1G-FE) replaced the two-valve 1G-E in most applications, although the lower cost model continued to be available in commercial models until September 1989. In August 1989, the Crown received a light facelift, with more aerodynamic design front and rear, incorporating new bumpers. This was also when the 4-liter V8-engined Royal Saloon G was introduced, using the same engine which was to appear in the Lexus LS400 within a month. The LPG-powered M engine was replaced with the more powerful 1G-GP version at the same time, while the four-cylinder 3Y engine received fuel injection.

In August 1990, a version of the supercharged 2.0 model fitted with the bigger body of the 3.0 was added to the lineup (GS131H). This car was placed in a much higher tax bracket than the narrower-bodied versions. Such cars have different license plates than more compact cars and are therefore considered prestigious, if expensive. This was also when the new 2.5-liter 1JZ-GE engine was introduced as the 2500 Royal Saloon, available as a Sedan, Hardtop, or Wagon, replacing the earlier 2-liter Royal Saloon model. A few LPG-powered models were also available for commercial uses, using two-liter engines with either four or six cylinders. In October 1991, a large-bodied variant of the turbodiesel sedan was presented.

Station wagons were considered separate from the commercial van models in Japan. They were originally equipped with the 2-liter 1G-FE six, or as a supercharged "Royal Saloon" wagon. The 2.4 turbodiesel was also available. As of August 1990, the 2.5-liter 1JZ-FE was also made available in the station wagon lineup.

• 
  Toyota Crown Hardtop Royal Saloon (Japan)
• 
  Toyota Crown Hardtop Royal Saloon (Japan)
• 
  Toyota Crown Hardtop Royal Saloon G V8 (UZ131, Japan)
• 
  Toyota Crown Hardtop Royal Saloon G V8 (UZ131, Japan)
• 
  Toyota Crown Sedan 2.0i Royal Saloon (Indonesia)
• 
  Toyota Crown Sedan 2.0i Royal Saloon (Indonesia)
• 
  Crown Royal Saloon Hardtop (1991 JZS131)
• 
  Toyota Crown Van Deluxe (Japan)
• 
  Interior

Facelift (1991–1999)

In August 1991, when the Crown hardtop was redesigned and became the S140 series, the Crown sedan and wagon and van were also restyled but retained the S130 model code. At this point the 1JZ-GE and 2JZ-GE engines replaced the M-series in-line-six engines for the Crown lineup, as well as some of the supercharged G-series models. The Standard Sedan for Taxi and base model Wagon feature round headlights and chrome bumpers. The taxi is powered by 2.4-liter diesel engine matched to 4-speed column-mounted manual transmission. In Hong Kong and Singapore, the Crown Sedan with the diesel engine was the most common vehicle used as taxis.

The Crown Royal Saloon, meanwhile, was an exclusive car. In October 1991, the supercharged model was discontinued. In December 1995, the sales of sedan model was stopped for the Japanese market. In September 1996, the 1JZ-GE 2.5-liter engine received VVT-i, which led to the power jumping from 180 to 200 PS (132 to 147 kW). The sales of the wagon and van were stopped in December 1999.

In 1993, Great Wall made unlicensed clones of the S130 under the name CC1020S. Great Wall also made a station wagon variant, known as CC6470, and a crew cab version which was known as CC1020S. A version with stretched station wagon bodywork set on the BJ212 "Jeep" chassis was also offered.

• 
  Facelift model Crown Sedan Diesel for Taxi (YS130) with round headlights.
• 
  Toyota Crown Deluxe used by JGSDF
• 
  Toyota Crown Royal Saloon (JZS133, Indonesia), 3 stripes grill.
• 
  Toyota Crown 3.0 Royal Saloon (JZS133, Indonesia)
• 
  Toyota Crown Royal Saloon (Japan), 4 stripes grill.
• 
  Toyota Crown Royal Saloon (Japan)
• 
  Toyota Crown sedan (China), 5 stripes grill.
• 
  Toyota Crown Royal Saloon wagon (Japan)
• 
  Toyota Crown Royal Saloon wagon (Japan)
• 
  Toyota Crown Van Super Deluxe (Japan)

Indonesian assembly (1989–2000)

This generation marked the return of the Crown to Indonesia in 1989, where it had not been sold regularly since 1984 when it was replaced by GX71 Cressida. This car was assembled locally by Toyota Astra Motor. It was originally sold with the two-liter 1G-FE inline-six engine (GS131). Two trim levels were available, 2.0i Super Saloon with 5-speed manual transmission and 2.0i Royal Saloon with 4-speed automatic transmission. It received major facelift in 1992 and continued to be built after 1995 when the sedan was replaced in Japan. Also in 1995, The 2.0 was replaced with a 2JZ-GE 3-liter engine. Unique for Indonesia, the Crown 3.0 Super Saloon trim was combined with a 5-speed manual transmission, while the more expensive 3.0 Royal Saloon was available with a 4-speed automatic transmission. The production of S130 Crown in Indonesia was stopped in 2000.

Saibeijian Crown

While the S130 Crown was officially sold by Toyota in China, there was also a rebadged S130 Crown sold as Saibeijian Crown by Datong Saibeijian Auto Works at the same time. This brand also rebadged numerous cars such as Toyota Previa, Honda Accord, Nissan Sunny and Honda Odyssey.

In the early 1980s, the number of imported cars in China increased dramatically, despite the high import tax. China's consumer spending was getting out of control and created a severe trade deficit. Customs duties on imported goods were raised in March 1985 and a new "regulatory tax" was added a few months later. By the fall of 1985, a two-year moratorium on nearly all vehicle imports was imposed. While limiting imports, China also tried to increase local production by boosting the various existing joint-venture passenger car production agreements, as well as adding new ones. But the unclear definition of "car production in China" at that time, inspired the local entrepreneurs to use this loophole.

These rebadged cars were actually fully imported cars from Japan and then were shipped to Hong Kong but without tires, mirrors, and door handles to be classified as "car parts", thus avoiding 60-80% import tax. The remaining parts were also shipped from Japan to Hong Kong and was assembled as a full car at Guangdong. But to be able to sell these cars, this Guangdong-based company need a government approved local automobile brand. The company then made a business deal with Shanxi-based small bus manufacturer, Datong Saibeijian Auto Works, to use their licensed brand for selling these cars and one of them was the Saibeijian Crown.

This was barely concealed smuggling. This made both the real joint ventures that invested so much money and the Chinese government that lost their income from the import tax unhappy. This led to the government arresting more than 200 government, customs, and law enforcement officials in the southern Guangdong area around Zhanjiang on September 8, 1998. This affair was known as the "9898 smuggling case", the largest mainland smuggling racket of the last 50 years. The state's lost revenue was estimated around ¥30 billion from the illegal import of thousands of tonnes of crude oil, steel, cars, and other manufactured goods.

Ninth generation (S140; 1991)

Ninth generation
Overview
Model code	S140
Production	1991–1995
Body and chassis
Body style	4-door pillared hardtop sedan
Layout	Front-engine, rear-wheel-drive
Related	Toyota Crown Majesta (S140) Lexus GS (S140)
Powertrain
Engine	Gasoline: 2.0 L 1G-FE I6 (GS141) 2.5 L 1JZ-GE I6 (JZS141) 3.0 L 2JZ-GE I6 (JZS143/145) Diesel: 2.4 L 2L-TE/THE I4 diesel (LS141)
Transmission	4-speed automatic 5-speed automatic
Dimensions
Wheelbase	2,730 mm (107.5 in)
Length	4,800 mm (189.0 in) (Royal Saloon) 4,690 mm (184.6 in)
Width	1,750 mm (68.9 in) (Royal Saloon) 1,695 mm (66.7 in)
Height	1,440 mm (56.7 in)
Curb weight	1,620 kg (3,571 lb)

Launched in 1991, this model of Toyota Crown departed from the traditional styling of previous models, and introduced the new Royal Touring trim level. The new hardtop model carried the S140 chassis designation, while the refreshed Crown sedan and wagon still kept the S130 chassis from the previous generation Crown. Unlike its predecessors, this model was produced exclusively in right-hand drive and consequently was not exported to markets with right-hand traffic. Engine options used in the hardtop model were the 2JZ-GE 3000cc DOHC, 1JZ-GE 2500cc DOHC, and the 2L-THE diesel 2400cc SOHC engine. The 1G-FE 2000cc DOHC engine was carried over from the eighth generation for use in the sedan and wagon models. Transmission options were an optional five speed transmission dubbed "5ECT-i" used with the 2JZ-GE, a four speed "ECT-i" transmission used with the 2JZ-GE, and a four speed "ECT" transmission for the 1JZ-GE, 2L-THE, and 1G-FE equipped vehicles.

For the ninth-generation Crown, the Super Edition trim level was removed, and the Super Saloon trim became the entry-level trim. A new trim level was introduced, called Royal Touring, meant to be a mid-tier model with the option of both the 2JZ-GE and 1JZ-GE. The trim levels for the S140 hardtop are Super Select, Super Saloon Extra, Royal Touring, Royal Saloon, and Royal Saloon G. The Royal Saloon G trim kept all of the luxurious options of the previous generation including a fully digital gauge cluster, GPS navigation, and more safety equipment than other trim levels. As with the previous generation, the air suspension-equipped Royal Saloon G has a different model code (JZS145 versus JZS143 for the coil sprung model).

Styling was largely changed from the S130 generation. The design had shifted to a more curved front and rear end, and removed the Crown badges from the C-pillars which had been on previous models. A brand new taillight design was introduced, which was a curved, wrap-around design. The front end styling was influenced from the UCF10 Toyota Celsior which was released two years prior to the S140 Crown hardtop. Because of the new rear-end styling moving away from the traditional separate, squared taillights, the design was negatively received. This caused sales and popularity to be much lower than its rivals, the Nissan Cedric and Gloria, as well as the previous generation Crown.

In January 1993, a special-edition model was released, called the Prestige Saloon series for the Royal Saloon G and the Royal Saloon trims, and the Owners Prestige series for the Royal Touring trim. This special model included new chrome door handles and an all-chrome grill.

Later in 1993, a facelift model was released. The rear design went back to that of the S130 type Crown which was more favorably received. Other changes included restoring the Crown emblems to the C-pillars, a further revised front grill, front bumper, and rear bumper. This newly revised Crown was well received over the previous styling, and was able to win back some sales for the ninth-generation Crown.

• 
  Pre-facelift Crown Royal Saloon Hardtop in Japan.
• 
  Facelift Crown Royal Saloon Hardtop in Japan.

Tenth generation (S150; 1995)

Tenth generation
Facelift Toyota Crown Royal Saloon Hardtop (JZS151) in Japan
Overview
Model code	S150
Production	1995–1999 (Hardtop) 1995–2001 (Sedan)
Assembly	Japan: Toyota, Aichi (Motomachi plant)
Body and chassis
Body style	4-door sedan 4-door pillared hardtop sedan
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Related	Toyota Crown Majesta (S150) Lexus GS (S160)
Powertrain
Engine	2.0 L 1G-FE I6 2.0 L 1G-GPE LPG I6 2.5 L 1JZ-GE I6 3.0 L 2JZ-GE I6 2.4 L 2L-TE diesel I4
Transmission	4-speed automatic 5-speed manual 5-speed automatic
Dimensions
Wheelbase	2,780 mm (109.4 in)
Length	4,820 mm (189.8 in) 4,690 mm (184.6 in) (2.0 L)
Width	1,760 mm (69.3 in) 1,695 mm (66.7 in) (2.0 L)
Height	1,425 mm (56.1 in)

The 150-series Crown, launched in 1995, had boxier styling than the previous generation and was built as a sedan and hardtop (frameless door window) only. This was the first Crown to not be built using body-on-frame construction, adopting the unibody construction introduced with the 140-series Majesta. The wagon retained the old S130 chassis until 1999.

The hardtop was offered in Royal Extra, Royal Saloon, Royal Saloon G, and sporty Royal Touring trim levels, while sedans were offered in Super Deluxe, Super Saloon, Super Saloon Extra and Royal Saloon trims.

Gasoline engines were offered solely as inline 6-cylinder units with 2.0, 2.5, or 3.0-liter displacements, while an LPG version of the 2.0 L engine was offered, as was a 2.4 L 4-cylinder turbodiesel. As with previous generations, all vehicles with the 2.0 L engine were offered in a slightly shorter and narrower vehicle so as to be in compliance with Japanese government dimension regulations. All-wheel drive was offered for the Royal Extra and Royal Saloon. The S150 Crown would be the last generation to be offered with a manual transmission.

In 1996, it won the Automotive Researchers' and Journalists' Conference Car of the Year award in Japan which it shared with the Crown Majesta.

Unlike most preceding generations, the S150 Crown was not exported in great numbers. It was mainly sent to China, Hong Kong, the Middle East, and Southeast Asian markets like the Philippines, Singapore and Vietnam, with limited exports to some Caribbean and Latin American countries. These Crowns, with sedan rather than hardtop bodywork, were fitted either with the 2.0-liter 1G-FE or the 3-liter 2JZ-GE unit depending on market conditions.

• 
  Sedan front
• 
  Sedan rear
• 
  Pre-facelift 1997 Crown Royal Saloon Hardtop
• 
  Pre-facelift Crown Royal Saloon Hardtop (JZS151)
• 
  Facelift Crown Royal Saloon Hardtop (JZS151)

Eleventh generation (S170; 1999)

Eleventh generation
1999–2001 Toyota Crown Royal Saloon (JZS175, Japan)
Overview
Model code	S170
Production	1999–2003 (Sedan) 1999–2007 (Wagon)
Assembly	Japan: Toyota, Aichi (Motomachi plant)
Body and chassis
Body style	4-door sedan 5-door wagon
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Related	Toyota Crown Majesta (S170)
Powertrain
Engine	2.0 L 1G-FE I6 2.5 L 1JZ-FSE I6 2.5 L 1JZ-GE I6 2.5 L 1JZ-GTE turbo I6 3.0 L 2JZ-FSE I6 mild hybrid 3.0 L 2JZ-GE I6
Transmission	4-speed automatic 5-speed automatic
Dimensions
Wheelbase	2,780 mm (109.4 in)
Length	4,820 mm (189.8 in) 4,690 mm (184.6 in) (2.0 L)
Width	1,765 mm (69.5 in) 1,695 mm (66.7 in) (2.0 L)
Height	1,465 mm (57.7 in)

The 170-series, launched in September 1999, features shorter front overhang therefore maximizing interior and trunk space. There are two different 170-series 4-door Saloon; the Royal and Athlete. The Majesta, while sharing the same S170 chassis, is a separate vehicle which is larger and longer than the Crown and has distinctive front and rear styling. The four-door Hardtop was discontinued and no left-hand drive versions were produced, restricting exports to right-hand drive markets like Singapore. The 170-series Estate launched in December 1999 was the first new Crown Wagon after the 130-series and continued in production until June 2007. The engine installed is either the 2.0, 2.5 or 3.0 in-line-six. The Athlete V has 2.5-liter 1JZ-GTE turbo and was offered in both sedan and wagon versions, however the Athlete V wagon was only available until 2003, despite Crown Estate production continuing until 2007. The Royal Saloon was also offered with a 3.0-liter 2JZ-FSE mild hybrid from August 2001 to 2003, using a belted alternator starter system. Later non-hybrid models were offered with the direct-injection version of the 2JZ engine.

For the updated Athlete versions starting from August 2001, the tail lamps were changed from incandescent to LED lights and the front grill changed to a mesh design. Furthermore, the grey cloth interior was changed to black cloth, with black leather becoming an available option. Optional 17-inch wheels were also offered starting from 2001. An innovation was the electronically controlled (Toyota Electronic Modulated Suspension) air suspension combining nonlinear H-infinity control of damping force and roll-orientation control. The 170-series Crown replaced the aging 130-series in the Indonesian market.

A total of 10,545 Athlete V sedans were manufactured, with a further 5,012 Athlete V Estates manufactured.

Gallery

• 
  1999–2001 Crown Royal Saloon (JZS175, Japan)
• 
  1999–2001 Crown Athlete V (JZS171, Japan)
• 
  1999–2001 Crown Athlete V (JZS171, Japan)
• 
  1999–2001 Crown Estate Athlete (JZS171W, Japan)
• 
  1999–2001 Crown Estate Athlete (JZS171W, Japan)
• 
  2001–2003 Crown Royal Extra Limited (GS171, Japan)
• 
  2001–2003 Crown Royal Extra Limited (GS171, Japan)
• 
  2001–2003 Crown Royal Saloon (JZS175, Japan)
• 
  2001–2003 Crown Athlete V (JZS171, Japan)
• 
  2001–2003 Crown Athlete V (JZS171, Japan)
• 
  2001–2003 Crown Estate Athlete (JZS171W, Japan)
• 
  2001–2003 Crown Estate Athlete (JZS171W, Japan)
• 
  Toyota Crown (S170) in Tokyo Metropolitan Police Department service
• 
  Interior

Twelfth generation (S180; 2003)

Twelfth generation
Toyota Crown Royal Saloon S180 (China; pre-facelift)
Overview
Model code	S180
Production	2003–2008 2005–2009 (China)
Assembly	Japan: Toyota, Aichi (Motomachi plant) China: Tianjin (TFTM)
Body and chassis
Body style	4-door sedan
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Platform	Toyota N platform
Related	Toyota Crown Majesta (S180) Lexus GS (S190)
Powertrain
Engine	2.5 L 4GR-FSE V6 2.5 L 5GR-FE V6 (China) 3.0 L 3GR-FSE V6 3.0 L 3GR-FE V6 (China) 3.5 L 2GR-FSE V6
Transmission	5-speed automatic 6-speed automatic
Dimensions
Wheelbase	2,850 mm (112.2 in)
Length	4,855 mm (191.1 in)
Width	1,780 mm (70.1 in)
Height	1,470 mm (57.9 in)
Curb weight	1,620–1,700 kg (3,571.5–3,747.9 lb)

The S180 model of the Crown, released in late 2003, was based on the Zero Crown concept car. The engine was changed to a V6 for the new Royal and Athlete models, while the Crown Majesta used the V8 only, now in 4.3-liter form with 4WD optional. The new engines gave more performance while also giving better fuel economy. Left-hand drive Crowns became available for the first time since 2001 with this generation, although they were produced exclusively in China by Tianjin FAW Toyota Motor for sale in the domestic market. Radar Pre-Collision System added a single digital camera to improve the accuracy of collision forecast and warning and control levels. In television commercials in Japan a song was written by composer John Harle titled "How should I my true love know?". G-BOOK was introduced in May 2006.

Compared with the previous model, this model was increased by 70 mm (2.8 in) in the wheelbase and 15 mm (0.6 in) in body width. These changes gave it the largest interior size among its contemporaries, more than the Mercedes-Benz S-Class or BMW 7 Series. The slightly shorter and narrower versions with a 2.0 L engine are no longer offered as a Crown, with the Crown Comfort having assumed the market position in Japan for vehicles that complied with Japanese government dimension regulations.

The S170 series Crown Estate was continued alongside the S180 sedans, and was replaced by the luxury-oriented Toyota Alphard for load carrying duties and multiple passengers. It continued to use the older inline six-cylinder engines.

Gallery

• 
  Crown Royal Saloon (Japan; pre-facelift)
• 
  Crown Athlete (China; pre-facelift)
• 
  Crown Royal Saloon G (GRS182, Japan; facelift)
• 
  Crown Royal Saloon G (GRS182, Japan; facelift)
• 
  Crown Athlete (GRS180, Japan; facelift)
• 
  Interior

Thirteenth generation (S200; 2008)

Thirteenth generation
Toyota Crown Royal Saloon G (GRS202, Japan; pre-facelift)
Overview
Model code	S200
Production	2008–2012 2009–2015 (China)
Assembly	Japan: Susono, Shizuoka (Higashi Fuji plant); Toyota, Aichi (Motomachi plant) China: Tianjin (TFTM)
Body and chassis
Body style	4-door sedan
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Platform	Toyota N platform
Related	Toyota Crown Majesta (S200)
Powertrain
Engine	2.5 L 4GR-FSE V6 2.5 L 5GR-FE V6 (China) 3.0 L 3GR-FSE V6 3.0 L 3GR-FE V6 (China) 3.5 L 2GR-FSE V6 (Crown Athlete GRS204) 3.5 L 2GR-FXE (Hybrid) V6 4.3 L 3UZ-FE V8 (China) 4.6 L 1UR-FSE V8
Transmission	6-speed automatic 8-speed automatic eCVT automatic (hybrid)
Dimensions
Wheelbase	2,850 mm (112.2 in)
Length	4,870 mm (191.7 in)
Width	1,795 mm (70.7 in)
Height	1,470 mm (57.9 in)
Curb weight	1,792 kg (3,951 lb) 1,863 kg (4,107 lb) (For TRD)

This generation of the Crown was available in 4 different trim levels: the Crown Royal series which is a more comfortable and luxurious car; the Crown Athlete series, which is similar to the Royal series but has more aggressive styling and sporty features; the Crown Majesta series with different styling and more luxurious features than the Royal series; and the Crown Hybrid series which is a trim level designated for the Hybrid Synergy Drive V6 drivetrain. The larger 4.6 L 1UR-FSE V8 engine incurred a higher road tax liability.

Innovation

• The Crown is one of the first vehicles to have a Navigation/Artificial Intelligence-Adaptive Variable Suspension System (NAVI/AI-AVS) 3 Dimensional Satellite Navigation System coupled with G-BOOK and boasts many features that have not been developed by other luxury car makers. This system can adjust the damper firmness for corners based on map data and change transmission gear shift timings and engine braking for merging on and off highways and approaching tollbooths.
• First Toyota vehicle with active noise control.
• World first Collision avoidance system (PCS) with front-side millimeter wave radar to detect potential side collisions primarily at intersections or when another vehicle crosses the center line. The latest version tilts the rear seat upward, placing the passenger in a more ideal crash position if it detects a front or rear impact.
• World first PCS Collision avoidance system with GPS-navigation linked brake assist function. The system, which is designed to determine if the driver is late in decelerating at an approaching stop sign, will then sound an alert and can also pre-charge the brakes to provide optimum braking force if deemed necessary. This system works in certain Japanese cities and requires Japan specific road markings that are detected by a CCD camera.
• The Crown Hybrid Night View introduced the first pedestrian detection feature for an active Automotive night vision system. Toyota added a feature which highlights pedestrians and presents them in a box on an LCD display in front of the driver.
• Updated Driver Monitoring System for detecting whether the driver's eyes are properly open. It monitors the driver's eyes to detect the driver's level of wakefulness. This system is designed to work even if the driver is wearing sunglasses, and at night.
• World's first center airbag introduced in 2009.

The Crown is set to rival the European BMW 5 Series, Mercedes-Benz E-Class, Audi A6, Jaguar XF, the American Cadillac CTS, and the Japanese Acura RLX, Honda Legend, Infiniti M and Nissan Fuga.

The Crown Athlete has been tested to do 0–100 km/h in under 6 seconds, while the Crown Hybrid has been estimated to take 5.4 seconds due to the additional power of the hybrid motor. The mechanically similar Lexus GS 450H Hybrid (GWS191) outputs 253 kW (339 bhp).

The Crown Hybrid Concept was exhibited at the 2007 Tokyo Motor Show.

Gallery

• 
  Crown Royal Saloon G (GRS202, Japan; pre-facelift)
• 
  Crown Athlete (Japan; pre-facelift)
• 
  Crown Athlete (Japan; pre-facelift)
• 
  Crown Hybrid (GWS204, Japan; pre-facelift)
• 
  Crown Hybrid (GWS204, Japan; pre-facelift)
• 
  Crown Royal Saloon (Japan; facelift)
• 
  Crown Royal Saloon (Japan; facelift)
• 
  Crown Athlete (Japan; facelift)
• 
  Crown Athlete (Japan; facelift)
• 
  Crown Hybrid (GWS204, Japan; facelift)
• 
  Interior
• 
  Crown S200 (2009–2012) in China
• 
  Crown S200 (2009–2012) in China
• 
  Crown Sport S200 (2011–2012) in China
• 
  Crown S200 facelift (2012–2015) in China
• 
  Crown S200 facelift (2012–2015) in China

Fourteenth generation (S210; 2012)

Fourteenth generation
Toyota Crown Hybrid Royal Saloon S210 (Japan; pre-facelift)
Overview
Model code	S210
Production	December 2012 – June 2018 (Japan) March 2015 – May 2020 (China)
Assembly	Japan: Toyota, Aichi (Motomachi plant) China: Tianjin (TFTM)
Body and chassis
Body style	4-door sedan
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive
Platform	Toyota N platform
Related	Toyota Crown Majesta (S210)
Powertrain
Engine	2.5 L 4GR-FSE V6 2.5 L 5GR-FE V6 (China) 3.5 L 2GR-FSE V6 2.5 L 2AR-FSE I4 (Hybrid) 2.0 L 8AR-FTS turbo I4
Transmission	6-speed automatic 8-speed automatic eCVT automatic (hybrid)
Dimensions
Wheelbase	2,850 mm (112.2 in) 2,925 mm (115.2 in) (China)
Length	4,885 mm (192.3 in) 4,970 mm (195.7 in) (China)
Width	1,800 mm (70.9 in) 1,805 mm (71.1 in) (China)
Height	1,495 mm (58.9 in) 1,480 mm (58.3 in) (China)
Curb weight	1,825–1,995 kg (4,023.4–4,398.2 lb) 1,660–1,690 kg (3,659.7–3,725.8 lb) (China)
Chronology
Successor	Toyota Avalon (XX50) (China)

The fourteenth generation Crown was launched on 25 December 2012 with new styling, with the Royal series front styling theme paying homage to the fifth generation MS105 series. Most aspects of the car can be controlled by Toyota Multi-Operation Touch panel.

The S210 Crown was launched in China in March 2015. Pricing currently ranges between 250,800 and 332,800 yuan (US$36,830–48,860) with four trim levels known as: Pioneer, Fashion, Sports and Elite. The Crown currently uses the 2-liter 8AR-FTS turbocharged four-cylinder engine paired to an 8-speed automatic gearbox. Compared to its Japanese counterpart, the Crown S210 in China is 35 millimetres longer in length, 5 millimetres wider, 15 millimetres shorter in height, 65 millimetres longer in wheelbase and is 165 to 305 kilograms lighter in kerb weight. The front end of the Chinese variant has a razor blade grill just like its Japanese counterpart and has thinner headlights and tail lights for a sleeker design.

In Japan, the S210 series Crown was discontinued in June 2018, where it was replaced by the S220 model. It also ended production in May 2020 for the Chinese market, where the XX50 series Avalon replaced it.

Reborn Pink

A special edition version of the S210 Crown was produced in association with Japanese presenter/producer Terry Ito. It featured a bright pink exterior and various pink interior details. It was offered to customers for the month of September 2013. Toyota stated that they received 650 orders for the car, of which were mostly from male customers. Prices for used examples remain high because of the uniqueness and rarity of the trim.

Gallery

• 
  Crown Hybrid Royal Saloon (Japan; pre-facelift)
• 
  Crown Hybrid Athlete ReBORN Pink (Japan; pre-facelift)
• 
  Crown Athlete (Japan; pre-facelift)
• 
  Crown Hybrid Royal Saloon (Japan; facelift)
• 
  Crown Hybrid Athlete (Japan; facelift)
• 
  Crown Athlete (Japan; facelift)
• 
  Interior
• 
  Crown front (China)
• 
  Crown rear (China)

Fifteenth generation (S220; 2018)

Fifteenth generation
2018 Toyota Crown 2.0 S (ARS220, Japan)
Overview
Model code	S220
Production	June 2018 – June 2022
Assembly	Japan: Toyota, Aichi (Motomachi plant)
Body and chassis
Body style	4-door sedan
Layout	Front-engine, rear-wheel-drive Front-engine, four-wheel-drive (2.5 L hybrid)
Platform	TNGA: GA-L (narrow)
Powertrain
Engine	Gasoline: 2.0 L 8AR-FTS turbo I4 Gasoline hybrid: 2.5 L A25A-FXS I4 3.5 L 8GR-FXS V6
Electric motor	105 kW (141 hp; 143 PS) 1KM AC synchronous (2.5 L hybrid) 132 kW (177 hp; 179 PS) 2NM AC synchronous (3.5 L hybrid)
Power output	List 180 kW (241 hp; 245 PS) (2.0 L) 135 kW (181 hp; 184 PS) (2.5 L hybrid; gasoline engine only); 166 kW (223 hp; 226 PS) (2.5 L hybrid; combined system output) 220 kW (295 hp; 299 PS) (3.5 L hybrid; gasoline engine only); 264 kW (354 hp; 359 PS) (3.5 L hybrid; combined system output)
Transmission	8-speed automatic (2.0 L) eCVT automatic (2.5 L hybrid) 10-speed "Multi Stage Hybrid System" automatic (3.5 L hybrid)
Dimensions
Wheelbase	2,920 mm (115.0 in)
Length	4,910 mm (193.3 in)
Width	1,800 mm (70.9 in)
Height	1,455 mm (57.3 in)
Curb weight	1,690–1,900 kg (3,726–4,189 lb)
Chronology
Predecessor	Toyota Crown Majesta (S210) (Crown G-Executive)

The fifteenth-generation Crown was unveiled as a concept at the 45th Tokyo Motor Show in October 2017 and went on sale on 26 June 2018. The vehicle is built on a narrow version of the same TNGA-L platform that is used by other Lexus and luxury Toyota sedans. Three engine choices are offered so as to provide buyers advantages in savings with regards to Japan's annual road tax obligation, and standard equipment content is increased with each trim package matched to the engine size.

Trim levels for the Japanese market Crown are B, S, G, G Executive, RS-B, RS, and RS Advance. All trim levels are offered with either rear wheel drive or full-time all-wheel drive. The S220 Crown carried over the 2.0-liter 8AR-FTS turbocharged four-cylinder gasoline engine from the previous model, introduced the 2.5 liter A25A-FXS paired with the Hybrid Synergy Drive system, as well as the 3.5-liter 8GR-FXS V6 paired with the Multi Stage Hybrid system from the Lexus LC 500h and LS 500h. The 2.0 L turbocharged engine is only available in the rear wheel drive RS and RS Advance. All trim levels, except the rear wheel drive G Executive, can be purchased with the 2.5 L Hybrid. The 3.5 L Hybrid is only installed in the rear wheel drive RS Advance and G Executive. The only engine for the 4WD models is 2.5 L Hybrid. The 2.5 L Hybrid G Executive is the only version exported to Indonesia.

In October 2019, the S220 Crown was selected by the government of Indonesia to serve as an official vehicle for cabinet ministers, replacing the older Crown Royal Saloon which had been in use since 2009. However, unlike some preceding generations of the Crown in Indonesia, the S220 is imported in small numbers and unavailable for consumer purchase.

In 2020, a facelift of the S220 Crown was planned but rejected by president Akio Toyoda and scrapped in favour of developing a new generation. However, in November 2020, the S220 received a minor update which brought a redesigned centre control stack and centre console to the interior, featuring a single 12.3-inch touchscreen and more intuitive physical climate controls in place of the previous dual-screen design.

T-Connect

The fifteenth-generation Crown is one of the first Toyota models to be equipped with a DCM (Data Communication Module) system which then links with a Vehicle Control Network. By using this hardware, Toyota was able to provide various connected services to T-Connect subscribers through its proprietary Mobility Service Platform (MSPF), an information infrastructure developed by the company for Connected Cars. From then, Toyota intended to equip most new passenger vehicles in its domestic market with DCM.

On August 1, 2018, Toyota Motor Corporation (Toyota), with Toyota City, started Japan's first verification testing for road maintenance inspections using vehicle data obtained from connected cars. The verification test enabled assessment of whether the degree of road deterioration index values computed from the car's behavior data and actual road conditions are consistent, and validate these findings on more typical regional roads. Toyota also aimed to further advance its technology toward supporting administrative services that implement road maintenance and inspection work in Toyota City more accurately and appropriately.

Toyota Safety Sense 2.0

The fifteenth generation Crown is equipped with Toyota Safety Sense 2.0 just like most Toyota models for 2018. Some added or improved features include:

• (LTA) Lane Tracing Assist
• Dynamic Radar Cruise Control (with all-speed vehicle following function)
• (PCS) Pre-Collision System with Pedestrian Detection (can detect bicyclists and even pedestrians at night)
• (AHB) Automatic High Beam
• (RSA) Road Sign Assist
• Advance car launch notification function

Gallery

• 
  2018 Toyota Crown 2.5 Hybrid S Four (AZSH21, Japan)
• 
  2018 Toyota Crown 2.0 RS (ARS220, Japan)
• 
  2018 Toyota Crown 2.5 Hybrid RS Advance (AZSH20, Japan)
• 
  Interior (2018–2020)
• 
  Interior (2020–2022)
• 
  The Crown emblem for the fifteenth generation model
• 
  Toyota Crown prototype displayed at the 2017 Tokyo Motor Show
• 
  Toyota Crown 2.0 Turbo S (ARS220) Police Car

Sixteenth generation (S230; 2022)

The sixteenth generation of the Crown family was unveiled on 15 July 2022. Considered as a "reboot" to the Crown nameplate, four body styles were introduced, which are Crossover, Sport (previewed by the Crossover EV concept car in December 2021), Sedan and Estate. The latter three body styles will be released within the 2023 and 2024 timeframe. Citing the Crown as a "symbol of Japan's affluence and Japanese pride", Toyota CEO Akio Toyoda announced that the Crown range of vehicles would be available in global markets for the first time in history, with availability in about 40 countries and regions with an expected annual sales volume of around 200,000 units. In Japan, the four models will be sold in dedicated stores for the Crown brand, named "The Crown".

The decision to develop the sixteenth-generation Crown arose from rejection of plans for a mid-generational refresh of the fifteenth-generation model, after Akio Toyoda scrapped the plans and advocated for a next-generation model at a product planning meeting.

With the exception of the S230/232 sedan, this generation is the first Crown to use a front-wheel drive-based platform (TNGA-K) – although it is paired with Toyota's drive shaft-less electric all-wheel drive (E-Four) system as standard.

Crossover (S235; 2022)

Sixteenth generation Crossover
2023 Toyota Crown Platinum (Canada)
Overview
Model code	S235
Also called	Toyota Crown SportCross (China)
Production	July 2022 – present
Model years	2023–present (North America)
Assembly	Japan: Toyota, Aichi (Motomachi plant and Tsutsumi plant)
Designer	Mitsunori Miyazaki (project chief designer) Toyokazu Nishihama and Yukiko Yano (exterior) Shunsuke Tanaka and Koji Yamaguchi (interior)
Body and chassis
Body style	4-door fastback sedan
Layout	Transverse front-engine, four-wheel-drive (E-Four)
Platform	TNGA: GA-K
Related	Toyota Crown Sport Toyota Crown Signia/Estate Lexus RX (ALA10/ALH10) Toyota Highlander/Kluger/Crown Kluger (XU70) Lexus ES (XZ10)
Powertrain
Engine	Gasoline hybrid: 2.5 L A25A-FXS I4 (AZSH35) 2.5 L A25B-FXS I4 (China, AZSH30) 2.4 L T24A-FTS turbo I4 (TZSH35)
Electric motor	List 2× permanent magnet synchronous: 2.5 L: 3NM (front); 4NM (rear) 2.4 L turbo: 1ZM (front); 1YM (rear)
Power output	List 2.5 L: 137 kW (184 hp; 186 PS) (gasoline engine only) 88 kW (118 hp; 120 PS) (3NM motor) 40 kW (54 hp; 54 PS) (4NM motor) 172 kW (231 hp; 234 PS) (combined system output) 2.4 L turbo: 200 kW (268 hp; 272 PS) (gasoline engine only) 61 kW (82 hp; 83 PS) (1ZM motor) 59 kW (79 hp; 80 PS) (1YM motor) 257 kW (345 hp; 349 PS) (combined system output)
Transmission	eCVT (2.5 L) 6-speed "Direct Shift-6AT" automatic + "eAxle" (2.4 L turbo)
Hybrid drivetrain	Power-split (2.5 L) Parallel (2.4 L turbo)
Battery	5 Ah nickel–metal hydride
Dimensions
Wheelbase	2,850 mm (112.2 in)
Length	4,930–4,980 mm (194.1–196.1 in)
Width	1,840 mm (72.4 in)
Height	1,540–1,555 mm (60.6–61.2 in)
Curb weight	1,720–1,980 kg (3,792–4,365 lb)
Chronology
Predecessor	Toyota Avalon (North America and Middle East)

The Crossover-type Crown was released on 15 July 2022 as the first body style of the sixteenth-generation Crown family to be launched. It was sold in North America after 50 years of hiatus of the Crown nameplate in the region since 1972.

The design of the Crossover-type Crown was described as a combination between a full-size sedan and an SUV, with a sloping roof and a conventional sedan trunk opening. It is based on the front-wheel drive-based GA-K platform while offering "E-Four"/"E-Four Advanced" electric four-wheel drive system as standard. All models come equipped with acoustic glass and extensive sound deadening to improve noise, vibration, and harshness, emphasizing Crown's premium positioning.

Mass production of the Crown Crossover was started at the Tsutsumi plant from around late August 2022, and at the Motomachi plant from mid-September 2022.

• 
  Rear view
• 
  Interior

Powertrain

Two standard gasoline hybrid powertrain options are offered, which is a 2.5-liter A25A-FXS engine producing a total 172 kW (231 hp; 234 PS) of system output with "E-Four" four-wheel drive system and eCVT, and a more powerful turbocharged 2.4-liter T24A-FTS engine (marketed as "Dual Boost Hybrid System" in Japan and "Hybrid Max" in North America) producing a total 257 kW (345 hp; 349 PS) of system output and 542 N⋅m (400 lb⋅ft) of torque with "E-Four Advanced" four-wheel drive system and a 6-speed "Direct Shift-6AT" automatic transmission with rear "eAxle".

Toyota Crown hybrid drivetrains

Model Spec		Hybrid A25A-FXS		Dual Boost / Max T24A-FTS
		Power	Torque	Power	Torque
Output	Combined, net	166–176 kW (222–236 hp)	—	254–260 kW (340–349 hp)	543 N⋅m (400.4 lb⋅ft)
	Gasoline engine	137 kW (184 hp) @ 6000	221 N⋅m (163 lbf⋅ft) @ 3600–5200	197–200 kW (264–268 hp) @ 6000	450–460 N⋅m (332–339 lbf⋅ft) @ 2000–3000
	Electric motor, front	88 kW (118 hp)	202 N⋅m (149 lb⋅ft)	61 kW (82 hp)	292 N⋅m (215.4 lb⋅ft)
	Electric motor, rear	40 kW (54 hp)	121 N⋅m (89 lb⋅ft)	58.6 kW (79 hp)	168 N⋅m (124 lb⋅ft)
Consumption	City	42 mpg‑US (5.6 l/100 km)		29 mpg‑US (8.1 l/100 km)
	Highway	41 mpg‑US (5.7 l/100 km)		32 mpg‑US (7.4 l/100 km)
	Combined	41 mpg‑US (5.7 l/100 km)		30 mpg‑US (7.8 l/100 km)

Markets

Japan

In Japan, grade levels offered for the Crown Crossover are the X, G, G Leather Package, G Advanced, G Advanced Leather Package, RS, and RS Advanced, with the latter two equipped with the T24A-FTS engine. Targeted monthly sales in Japan is set at 3,200 units. It went on sale in September 2022.

North America

The North American market Crown went on sale in October 2022 as a 2023 model year vehicle as a replacement to Toyota's former full-size sedan, the Avalon. Offered only in the Crossover body style and marketed simply as "Crown", grade levels available in the US and Canada are XLE, Limited, and Platinum. The latter is equipped with the T24A-FTS engine and a standard Adaptive Variable Suspension. The North American market Crown does not wear the Crown emblem at the front and the steering wheel; it instead wears Toyota's corporate emblem. It is also not equipped with the full-width daytime running light bar available in the Japanese market model, which is replaced with a chrome piece.

China

In China, the model is sold as the Crown SportCross by FAW Toyota as an imported model. It was introduced at the December 2022 Guangzhou Auto Show.

Taiwan

In Taiwan, where it is imported and sold by Hotai Motor, sales commenced on 30 March 2023. It is the first Crown model to be offered in Taiwan since 1974, when the nameplate was withdrawn from the market after production of the third generation ended. Like North America, the model is offered only in the Crossover body style and marketed simply as "Crown". It is available in two grade levels: Noble (Chinese: 貴族版; pinyin: Guìzúbǎn) with the A25A-FXS engine and Royal (Chinese: 皇家版; pinyin: Huángjiābǎn) with the T24A-FTS engine.

South Korea

The South Korean market Crown went on sale on 5 June 2023. This is the first Crown model in South Korea to be offered since 1972 when the nameplate was withdrawn from the market after production agreement with its local partner Shinjin Motors ended. Similar to other markets, it is available with two grades with the hybrid powertrain as standard: XLE with the A25A-FXS engine and Limited with the T24A-FTS engine.

Middle East

The 2023 Crown went on sale in the Middle Eastern markets on 11 June 2023. In Bahrain, it's available in three grades: Mid-Lux with the A25A-FXS engine and High-Low & High with the T24A-FTS engine. In Saudi Arabia, it's available in two grades: Premium & Majesta. In the United Arab Emirates, it's available in two grades: XLE and Platinum. This marks the first Crown model to be sold in the Gulf Cooperation Council markets since the 2000 model year after the production of the 10th generation ended.

Sport (S236; 2023)

Sixteenth generation Sport
2024 Crown Sport Z (Japan)
Overview
Model code	S236
Production	October 2023 – present
Assembly	Japan: Toyota, Aichi (Tsutsumi plant)
Designer	Yukihiro Koide, Lu Yi and Keita Kominami (exterior) Koji Minakawa and Junya Takahashi (interior)
Body and chassis
Body style	5-door SUV
Layout	Transverse front-engine, four-wheel-drive (E-Four)
Platform	TNGA: GA-K
Related	Toyota Crown Crossover Toyota Crown Signia/Estate Lexus RX (ALA10/ALH10) Toyota Highlander/Kluger/Crown Kluger (XU70)
Powertrain
Engine	Gasoline hybrid: 2.5 L A25A-FXS I4 (AZSH36)
Electric motor	List 2× permanent magnet synchronous: 2.5 L: 3NM (front); 4NM (rear)
Power output	List 2.5 L: 137 kW (184 hp; 186 PS) (gasoline engine only) 88 kW (118 hp; 120 PS) (3NM motor) 40 kW (54 hp; 54 PS) (4NM motor) 172 kW (231 hp; 234 PS) (combined system output)
Transmission	eCVT (2.5 L)
Hybrid drivetrain	Power-split or plug-in (2.5 L)
Battery	5 Ah nickel–metal hydride
Dimensions
Wheelbase	2,770 mm (109.1 in)
Length	4,720 mm (185.8 in)
Width	1,880 mm (74.0 in)
Height	1,565–1,570 mm (61.6–61.8 in)
Curb weight	1,810 kg (3,990 lb)

The Crown Sport was previewed as a prototype model in July 2022 alongside the Crossover, Sedan, and Estate models. Previously, the same model was showcased as a battery electric concept car called the "Crossover EV" in December 2021. The Crown Sport Hybrid launched in October 2023 for Japan, with the plug-in hybrid to follow in December 2023.

• 
  Rear view of Crown Sport Z (AZSH36W, Japan)
• 
  Interior

Markets

Japan

The Crown Sport hybrid launched in Japan on 6 October 2023, with orders beginning the same day. It is available solely in one trim, Z. The plug-in hybrid variant will follow in December.

Sedan (S230/232; 2023)

Not to be confused with the Comfort-based Toyota Crown Sedan.

Sixteenth generation Sedan
Toyota Crown Sedan FCEV
Overview
Model code	S230 (FCEV) S232 (HEV)
Production	November 2023 – present
Assembly	Japan: Toyota, Aichi (Motomachi plant)
Body and chassis
Body style	4-door sedan
Layout	Longitudinal front-engine, rear-wheel-drive
Platform	TNGA: GA-L
Related	Toyota Mirai (JPD20)
Powertrain
Engine	Gasoline hybrid: 2.5 L A25A-FXS I4 (HEV, AZSH32)
Electric motor	2NM permanent magnet synchronous (HEV; AZSH32) 3KM permanent magnet synchronous (FCEV, KZSM30)
Power output	List HEV: 136 kW (182 hp; 185 PS) (gasoline engine only) 132 kW (177 hp; 179 PS) (2NM motor) 180 kW (241 hp; 245 PS) (combined system output) FCEV: 134 kW (180 hp; 182 PS)
Transmission	10-speed "Multi Stage Hybrid System" automatic (hybrid)
Hybrid drivetrain	Power-split
Battery	4.3 Ah lithium-ion (HEV) 4.0 Ah lithium-ion (FCEV)
Range	820 km (510 mi) (FCEV)
Dimensions
Wheelbase	3,000 mm (118.1 in)
Length	5,030 mm (198.0 in)
Width	1,890 mm (74.4 in)
Height	1,475 mm (58.1 in)
Curb weight	2,020 kg (4,453 lb) (HEV) 2,000 kg (4,409 lb) (FCEV)

The Crown Sedan is a four-door sedan that was showcased as a pre-production model in July 2022, alongside the Crown Crossover, Crown Sport, and Crown Estate. and is scheduled for 2023 release. It uses the same platform as the second-generation Mirai with its longitudinal engine and rear-wheel-drive layout. Compared to the fifteenth generation, the sixteenth-generation sedan is 120 mm (4.7 in) longer in length and 150 mm (5.9 in) longer in wheelbase.

After a series of introduction, the Crown Sedan was launched in Japan on 2 November 2023 and went on sale on 13 November. Targeted monthly sales in the country is 600 units.

• 
  Rear view
• 
  Interior

Markets

Japan

In Japan, the Crown Sedan is marketed simply as "Crown" (though the "Sedan" designation is used to distinguish it from the other variants) and is available in one grade, Z, for both the fuel cell (FCEV) and hybrid (HEV) configurations.

The FCEV model adopts the same fuel cell system as the second-generation Mirai. Equipped with three high-pressure hydrogen tanks and a fuel cell, it has an approximate range of 820 km (509.5 mi) with just three minutes of hydrogen refilling time.

The HEV model is powered by a 2.5-litre A25A-FXS engine with a first application of a multi-stage hybrid system which combines the engine, two motors, and stepped gears.

China

In November 2022, FAW Toyota announced plans to sell the sixteenth-generation Crown Sedan in China as an imported model, marking the return of this model to the Chinese market after the domestically-produced fourteenth-generation sedan was discontinued in 2020. It was showcased in a mock-up prototype form at the Guangzhou Auto Show in December 2022. A working prototype of the FCEV model, built to Chinese specifications, was later showcased by Toyota at Fuji Speedway during the 2023 Fuji 24 Hours endurance race.

The Crown sedan went on sale in China in April 2024 with two grades available, Premium and Extreme. Like other Crown-branded vehicles, the Crown sedan is distributed through FAW Toyota dealerships.

Estate/Signia (S238; 2024)

Sixteenth generation Estate/Signia
2025 Toyota Crown Signia Hybrid Limited (USA)
Overview
Model code	S238
Production	June 2024 – present
Model years	2025 (North America)
Assembly	Japan: Toyota, Aichi (Tsutsumi plant)
Body and chassis
Body style	5-door SUV
Layout	Transverse front-engine, four-wheel-drive (E-Four)
Platform	TNGA: GA-K
Related	Toyota Crown Crossover Toyota Crown Sport Toyota Highlander/Kluger/Crown Kluger (XU70) Lexus RX (ALA10/ALH10)
Powertrain
Engine	Gasoline hybrid: 2.5 L A25A-FXS I4 (AZSH38)
Power output	240 hp
Transmission	eCVT (2.5 L)
Hybrid drivetrain	Power-split
Battery	5 Ah nickel–metal hydride
Dimensions
Wheelbase	2,850 mm (112.2 in)
Length	4,930 mm (194.1 in)
Width	1,880 mm (74.0 in)
Height	1,620 mm (63.8 in)
Chronology
Predecessor	Toyota Venza (XU80) (North America)

The Crown Estate crossover with its slightly low-roof styling was previewed as a mock-up model in July 2022, and will be available in both hybrid and plug-in Hybrid powertrains.

The model went on sale in North America in June 2024 for the 2025 model year as the Crown Signia. It replaced the smaller Venza. The Crown Signia will be available in XLE and Limited trims, powered by a 2.5-litre naturally-aspirated inline-four gasoline hybrid engine paired with two electric motors (all-wheel drive). The system has a total output of 181 kW (243 hp; 246 PS).

• 
  Side view
• 
  Rear view
• 
  Interior

Nameplate usage for other models

Crown Comfort and Crown Sedan (XS10; 1995–2018)

Main article: Toyota Comfort

Crown Comfort

Crown Sedan

To replace the commercial variant of the S130 Crown sedan, which was popular with taxicab operators, Toyota released a long-wheelbase version of the Comfort fleet sedan under the Crown Comfort nameplate. An upscale variant of the Crown Comfort with better appointments was sold exclusively in Japan as the Crown Sedan. While these models bore the Crown nameplate, they were based on the outgoing X80 series Mark II. The Crown Comfort was popular among taxicab operators in Japan, Hong Kong and Singapore, but gradually fell out of favor as better-appointed vehicles become available at competitive cost.

The Crown Comfort was removed from Toyota's Japanese website on 25 May 2017, with production of existing orders ceasing in January 2018. It was replaced by the JPN Taxi which was launched at the 45th Tokyo Motor Show in October 2017.

"Crown" sub-brand for the Chinese market (2021–present)

In April 2021, Toyota used the "Crown" nameplate as a sub-brand for high-end models sold by FAW Toyota in China, shortly after the S210 Crown sedan was discontinued in mid-2020. The first models introduced were the Crown Kluger (simplified Chinese: 皇冠陆放; traditional Chinese: 皇冠陸放; pinyin: Huángguàn Lùfàng) SUV (rebadged Highlander) and Crown Vellfire (simplified Chinese: 皇冠威尔法; traditional Chinese: 皇冠威爾法; pinyin: Huángguàn Wēiěrfǎ) minivan (renamed from Vellfire). Both models feature the Crown logo replacing the front Toyota logo, and in other places such as the hubcaps, instrument cluster and steering wheel (Crown Kluger only).

• 
  Crown Kluger
• 
  Crown Vellfire

Trademark dispute

In November 2015, Wuhan Municipal Sanitation Machinery Co., Ltd. sued Toyota and a Wuhan-based automobile dealer for trademark infringement in China based on the similarity of the Crown logo to Wuhan Municipal Sanitation Machinery's China Trademark Registration No. 217925. Toyota had requested cancellation of this trademark registration in December 2014, but its request was denied by the China Trademark Office (CTMO).

Sales

Year	Japan		United States	China
	Crown Series	Crown Crossover
1992	155,744
1993	117,673
1994	113,859
1995	130,068
1996	137,676
1997	109,711
1998	73,948
1999	87,253
2000	101,000
2001	82,901
2002	68,798
2003	56,089
2004	116,614
2005	79,546			28,260
2006	70,833			42,488
2007	56,455			53,111
2008	74,904			45,427
2009	40,216			32,856
2010	40,529			45,161
2011	29,927			30,321
2012	29,963			25,456
2013	82,701			23,315
2014	49,166			14,880
2015	44,316			26,017
2016	39,813			30,251
2017	29,085			37,455
2018	50,324			36,338
2019	36,125			10,378
2020	22,173			1,927
2021	21,411			4,061
2022	17,767	9,147
2023	43,029	38,721	19,063

References

Bibliography

• ＧＰ企画センター [GP Planning Center], ed. (2006). 日本自動車史年表 [History Timeline of the Japanese Automobile]. Tokyo: GP Publications. ISBN 978-4-87687-286-2.

External links

• Official website (global)