Jump to content

Talk:Glued laminated timber

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Wiki Education Foundation-supported course assignment

[edit]

This article is or was the subject of a Wiki Education Foundation-supported course assignment. Further details are available on the course page. Student editor(s): Jungseop.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 22:28, 16 January 2022 (UTC)[reply]

seems to be copied directly from vendor promotional materials

[edit]

"glulam is the only engineered wood product that can be produced in curved shapes" is a false statement. The marketing-speak is strong here! Only a salesman could make the leap from "glued laminated timbers are easily available in custom curves" to "it's impossible to make a curved engineered wooden product any other way!". — Preceding unsigned comment added by 205.153.180.229 (talk) 17:14, 25 April 2012 (UTC)[reply]

Has been sorted by edits. Dendrotek 10:53, 15 December 2012 (UTC)

Timber rivet

[edit]

Anybody got a picture of a timber rivet? 89.240.15.82 08:19, 29 June 2007 (UTC)[reply]

Nope. But there is a drawing of one in a book by Borg Madsen. Try Googling it. We don't use them much in Europe. Dendrotek 19:09, 2 August 2012 (UTC)

File:Centre Pompidou-Metz en juin 2010.jpg Nominated for Deletion

[edit]
An image used in this article, File:Centre Pompidou-Metz en juin 2010.jpg, has been nominated for deletion at Wikimedia Commons in the following category: Deletion requests September 2011
What should I do?

Don't panic; a discussion will now take place over on Commons about whether to remove the file. This gives you an opportunity to contest the deletion, although please review Commons guidelines before doing so.

  • If the image is non-free then you may need to upload it to Wikipedia (Commons does not allow fair use)
  • If the image isn't freely licensed and there is no fair use rationale then it cannot be uploaded or used.

This notification is provided by a Bot --CommonsNotificationBot (talk) 16:14, 5 September 2011 (UTC)[reply]

Distinguish between North American and European terminology and standards

[edit]

We should distinguish as I suggest above or alternatively there could be another Wiki article on European glulam. Anyone else got any thoughts? Dendrotek 19:06, 2 August 2012 (UTC) — Preceding unsigned comment added by Dendrotek (talk • contribs)

On External links - direct commercial promotion?

[edit]

On External links, Rosboro and Wiehag seem to be simply direct commercial promotions. Is this in accordance with Wikipedia ethics? If these are permitted to stay, others may be added.

Dendrotek 16:50, 9 November 2012 (UTC) — Preceding unsigned comment added by Dendrotek (talk • contribs)

Cross-laminated timber

[edit]

For some reason CLT links to this page. I'm not sure why; CLT is a substancially different product, and is used to form panels as opposed to beams. Furthermore, CLT is not mentioned anywhere on the page. 188.222.37.44 (talk) 23:31, 13 December 2012 (UTC)[reply]

Cross-laminated timber - Suggestion

[edit]

CLT has a close natural and technical affinity with glulam, and many of the same advantages, although as you say, it is manufactured in panel form. There are good examples of buildings and bridges with linear members in glulam and panels, decks and diaphragms in CLT. I may even find a few photos with my own copyright. In due course, both will be referenced in the same part of Eurocode 5. It uses similar/same adhesives and timber species. Generally, it does not use peeled veneers, but sliced or sawn layers. Historically, material very similar to CLT was laid up in aircraft (e.g. D H Mosquito) and in boats/ships, without the distinctions made in modern standards. I suggest we insert a short paragraph on CLT here and link to CLT as another article. I am willing to do it here, if people want, but not to start another article at present. Dendrotek 10:53, 15 December 2012 (UTC)

PR assembly adhesives

[edit]

Section at present says ″phenol-resorcinol adhesive in 1942.″ PRs were in use as assembly adhesives in Europe before that date.--Dendrotek 21:32, 20 February 2014 (UTC)[reply]

CLT [Update]

[edit]

Since there is still no paragraph about CLT, I suggest that the link for CLT to this article shall be removed. The fact that CLT is produced using the same adhesives as glulam is for me not a sufficient reason to treat it in the same way. Unfortunately, my writing skills are not sufficent to start an article from scratch, but I think it's better if there is no Article about CLT than this link to glulam. — Preceding unsigned comment added by 129.27.66.130 (talk) 08:18, 4 March 2014 (UTC)[reply]

Don't agree for the reasons and suggestion for dealing with it, already stated above. Glulam elements are linear, CLT ones are planar, otherwise in the bigger picture, the technology is the same and CLT is certainly different to plywood made from rotary veneers. I may soon be able to implement at least a short fix. I will not use the word "shall" though! There is however a bigger problem with the whole Article in that many points need differentiating between North American terminology - and sometimes technology - and the same in Europe. We meet this right at the start where we wolud never dream of using the word "lamstock." Could be a separate Article to deal with the European Glulam. What do people wish? How would Antipodean Glulam fit in?! Could cite the ISO's, I suppose. Quite a big writing job. --Dendrotek 09:39, 4 March 2014 (UTC)[reply]

[edit]

Hello fellow Wikipedians,

I have just added archive links to one external link on Glued laminated timber. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true to let others know.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 03:51, 9 January 2016 (UTC)[reply]

[edit]

Target page has been shut down and migrated. 109.69.214.29 (talk) 20:31, 16 January 2016 (UTC)[reply]

Done. Andy Dingley (talk) 21:17, 16 January 2016 (UTC)[reply]
[edit]

Hello fellow Wikipedians,

I have just modified 2 external links on Glued laminated timber. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 09:14, 2 July 2016 (UTC)[reply]

[edit]

Hello fellow Wikipedians,

I have just modified one external link on Glued laminated timber. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 22:31, 2 July 2016 (UTC)[reply]

Close-up image needed

[edit]

All of the images look like dimensional stock (e.g. 2x4s). A close-up showing the nature of this product would be helpful. Badger151 --64.118.223.196 (talk) 12:53, 19 September 2017 (UTC)[reply]

Retrieved from "https://en.wikipedia.org/w/index.php?title=Talk:Glued_laminated_timber&oldid=1207445513"