Jump to content

Segger Microcontroller Systems

Edit links
From Wikipedia, the free encyclopedia
(Redirected from Rolf Segger)
"Segger" redirects here. For other uses, see Segger (disambiguation).
Segger Microcontroller
Company typeGmbH
IndustryEmbedded software
Founded1992; 32 years ago (1992)
HeadquartersMonheim am Rhein, Germany
ProductsMiddleware components, JTAG development tools
Websitewww.segger.com

Segger Microcontroller, founded in 1992, is a private company involved in the embedded systems industry. It provides products used to develop and manufacture four categories of embedded systems: real-time operating systems (RTOS) and software libraries (middleware), debugging and trace probes, programming tools (integrated development environment (IDE), compiler, linker), and in-system programmers (Flasher line of products). The company is headquartered in Monheim am Rhein, Germany, with remote offices in Gardner, Massachusetts; Milpitas, California; and Shanghai, China.

History

[edit]

Segger Microcontroller was founded in 1992 by Rolf Segger in Hilden, Germany. The first product was the real-time operating system (RTOS), now named embOS. It was followed by emWin two years later. Initial products focused on RTOS and middleware products. However, the company later produced ISP-programming tools (Flasher) and debug probes (J-Link). In 2015, Segger introduced Embedded Studio, their cross-platform IDE for central processing units conforming to the ARM architecture, though recent versions are also used by RISC-V. All products are developed, maintained and updated in Germany except for Embedded Studio, which is primarily developed by a team of developers in the United Kingdom.

Product categories

[edit]

Debug and trace probes

[edit]

Segger is most noted for its J-Link family, which supports JTAG (Joint Test Action Group) and SWD (Serial Wire Debug) debug probes for microcontrollers that have older ARM cores (ARM7, ARM9, ARM11), ARM Cortex-M cores (M0, M0+, M1, M3, M4, M7, M23, M33, M85), ARM Cortex-R cores (R4, R5, R8), ARM Cortex-A cores (A5, A7, A8, A9, A12, A15, A17, A53, A72), Renesas RX, Microchip PIC32, SiLab EFM8, RISC-V.[1] It is also repackaged and sold as an OEM item[2] by Analog Devices as the mIDASLink, Atmel as the SAM-ICE, Digi International as the Digi JTAG Link, and IAR Systems as the J-Link and the J-Link KS. This is the only JTAG emulator that can add Segger's patented flash breakpoint software to a debugger to enable the setting of multiple breakpoints in flash while running on an ARM device which is typically hindered by the limited availability of hardware breakpoints.[3]

In the following table, the top group are trace devices, the bottom group are educational / hobbyist devices.

J-Trace & J-Link Models[4][5]
Model Host
USB
speed		 Host
Ethernet
speed		 Host
Wi-Fi
type		 Target
voltage
range		 Target Trace
connector
(pins, pitch)		 Target Debug
connector
(pins, pitch)		 Target
download
speed (max)		 Target
VCOM
UART		 Segger
software
features		 Photo
 
 
J-Trace PRO
(ARM & RISC-V)		 3.0 SS 1 Gbit/s None 1.2V to 5V 19-pins,
1.27mm
(150 MHz)		 20-pins,
2.54mm
(50 MHz)		 4 MByte/s None All
J-Trace PRO Cortex-A/R/M 3.0 SS 1 Gbit/s None 1.2V to 5V 19-pins,
1.27mm
(150 MHz)		 20-pins,
2.54mm
(50 MHz)		 4 MByte/s None All
J-Trace PRO Cortex-M 3.0 SS 1 Gbit/s None 1.2V to 5V 19-pins,
1.27mm
(150 MHz)		 20-pins,
2.54mm
(50 MHz)		 4 MByte/s None All
J-Trace PRO RISC-V 3.0 SS 1 Gbit/s None 1.2V to 5V 19-pins,
1.27mm
(150 MHz)		 20-pins,
2.54mm
(50 MHz)		 4 MByte/s None All
J-Link PRO PoE 2.0 HS 100 Mbit/s
(PoE)		 None 1.2V to 5V None 20-pins,
2.54mm
(50 MHz)		 4 MByte/s 2-pins
(10M)		 All
J-Link PRO 2.0 HS 100 Mbit/s None 1.2V to 5V None 20-pins,
2.54mm
(50 MHz)		 4 MByte/s 2-pins
(10M)		 All
J-Link ULTRA+ 2.0 HS None None 1.2V to 5V None 20-pins,
2.54mm
(50 MHz)		 4 MByte/s 2-pins
(10M)		 All
J-Link WiFi 2.0 HS None 802.11b/g/n
(2.4GHz)		 1.2V to 5V None 20-pins,
2.54mm
(15 MHz)		 1 MByte/s 2-pins
(115.2K)		 All
J-Link PLUS,
J-Link PLUS Compact		 2.0 HS None None 1.2V to 5V None 20-pins,
2.54mm
(15 MHz)		 1 MByte/s 2-pins
(115.2K)		 All
J-Link BASE,
J-Link BASE Compact		 2.0 HS None None 1.2V to 5V None 20-pins,
2.54mm
(15 MHz)		 1 MByte/s 2-pins
(115.2K)		 Limited
J-Link EDU
(discontinued)		 2.0 HS None None 1.2V to 5V None 20-pins,
2.54mm
(15 MHz)		 1 MByte/s 2-pins
(115.2K)		 Limited
J-Link EDU Mini 2.0 FS None None 3.3V None 9-pins,
1.27mm
(4 MHz)		 0.2 MByte/s None Limited
J-Link OB
(on board)		 2.0 FS None None Depends None Integrated
on dev board
(2 to 4 MHz)		 0.1 to 0.2
MByte/s		 Depends Limited
  • Note: Further models are J-Link LITE ARM, J-Link LITE CortexM, J-Link LITE RX, J-Link OEM.[6]
  • Note: Software options vary by model: J-Flash, J-Flash-SPI, Ozone, RDDI, RDI, Unlimited Flash Breakponts.
  • Note: The EDU & EDU Mini models cannot be used for commercial software development, also doesn't come with J-Flash, J-Flash-SPI, RDDI, RDI options.
  • Note: Adapters and isolators are available to convert the 20-pin 0.1"/2.54mm male shrouded (box) header to another target board connector.[7]
  • Note: The compact variants are functionally identical to the standard variants

See also

[edit]

References

[edit]
  1. ^ Segger J-Link Product Line
  2. ^ Advertisement
  3. ^ Circuit Cellar - Digital Library - New Product News Archived 2007-03-11 at the Wayback Machine
  4. ^ "J-Trace Products". Segger Microcontroller Systems. Archived from the original on October 7, 2024.
  5. ^ "J-Link Products". Segger Microcontroller Systems. Archived from the original on November 12, 2024.
  6. ^ Other J-Links; segger.com
  7. ^ J-Link adapters and isolators; segger.com
[edit]
Wikimedia Commons has media related to Segger.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Segger_Microcontroller_Systems&oldid=1257522195"