New South Wales Z18 class locomotive

New South Wales Z18 class
Z18 class 1806 c.1884
Type and origin Power type Steam Builder Vulcan Foundry Serial number 992–997 Build date 1882 Total produced 6
Specifications Configuration: ​  • Whyte 0-6-0T  • UIC Cn Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Driver dia. 4 ft 0 in (1,219 mm) Loco weight 37.5 long tons (38.1 t) Water cap. 850 imp gal (3,900 L; 1,020 US gal) Firebox: ​  • Grate area 13 sq ft (1.2 m2) Boiler pressure 140 psi (970 kPa) Heating surface 880 sq ft (82 m2) Superheater None Cylinders Two, inside Cylinder size 15 in × 22 in (381 mm × 559 mm)
Performance figures Tractive effort 12,272 lbf (54.6 kN)
Career Operators New South Wales Government Railways Class 285, R285 from 1889, Z18 from 1924 Numbers 285–290; 1801-1806 from 1924 Retired 1963–1972 Disposition 2 preserved, 4 scrapped

1805 stands outside the Reid's Hill depot, Port Kembla

The Z18 class (formerly 285 class and R.285 class) was a class consisting of six 0-6-0T steam tank locomotives built by Vulcan Foundry for the New South Wales Government Railways of Australia.

Order

An order was placed in February 1882, with the Vulcan Foundry for six 2-4-0T locomotives to the specification of the then Acting Locomotive Engineer, Mr Scott. During Mr Scott's subsequent absence in England on official business, Thomas Middleton, Locomotive Engineer, had the specifications altered to 0-6-0T wheel arrangement, together with other variations to the original order. Middleton claimed that the revised design would enable the locomotives to run at 30–33 mph (48–53 km/h) in suburban service. Commissioner Goodchap approved the changes and despite the protests on Scott's return, the variations were made.

The six locomotives were delivered in 1884 and designated the 285 class. They became the (R) 285 class in 1889 and the Z18 class in 1924.

Operation

Their 4-foot-0-inch (1.219 m) driving wheels proved too small for the speed required and they were reduced to shunting duties in Sydney Yard, with just the occasional venture into the suburbs.

In 1907, the locomotives were fitted with new domed boilers, replacing the domeless versions originally fitted. This increased their weight by 3 tons which improved their adhesion factor. Power reversing gear was fitted in 1922, making them the first class in New South Wales to be so fitted. It was a hydraulic type and was excellent when shunting at Sydney station, however this was only short lived and Johnson bar lever reversing gear was fitted shortly after.

In 1927, following the release of other locomotives with the electrification of the Sydney suburban network, the class was transferred to locomotive depot work, some being fitted with cranes and renumbered into the (X)10 series. Later, with the cranes removed, they were restored to their Z18 numbers and worked at Port Kembla shunting. 1076 was an exception which continued to be known by that number. No. 1802 (originally R286) was sold to the Public Works Department in 1927 and became their No. 75. It continued in service until it was cut up for scrap metal in 1964. 1801 and 1806 were sold to the Wallarah Coal Company in 1957 and worked on the isolated Catherine Hill Bay Coal Railway until the line ceased operation in December 1963.

Preservation

Preserved Z18 class locomotives

No.	Description	Manufacturer	Year	Current organisation	Location	Status	Ref
1803	0-6-0 T passenger	Vulcan Foundry	1884	NSW Rail Museum	Thirlmere	Thomas the Tank Engine	NSW Locomotive, Steam 1803
1804	0-6-0T Tank Engine	Vulcan Foundry	1884	Goulburn Loco Roundhouse Preservation Society	Goulburn	Undergoing steam trials	(now 1076)

See also

• NSWGR steam locomotive classification

Extra reading

• "Vulcan Foundry locomotive list". Retrieved 17 June 2008.