New South Wales D53 class locomotive

New South Wales D53 class
TF 1164, the 200th steam locomotive built by Clyde Engineering.
Type and origin Power type Steam Builder Clyde Engineering (160), Eveleigh Railway Workshops (30) Build date 1912–1917 Total produced 190
Specifications Configuration: ​  • Whyte 2-8-0  • UIC 1'Dh Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Driver dia. 4 ft 3 in (1,295 mm) Adhesive weight 65 t (64 long tons; 72 short tons) Loco weight 72 t (71 long tons; 79 short tons) Fuel type Coal Firebox: ​  • Grate area 29 sq ft (2.7 m2) Boiler pressure 160 psi (1.10 MPa) Heating surface 1,755 sq ft (163.0 m2) Superheater: ​  • Heating area 365 sq ft (33.9 m2) Cylinders Two, outside Cylinder size 22 in × 26 in (559 mm × 660 mm)
Performance figures Tractive effort 33,557 lbf (149.3 kN) Factor of adh. 4.46
Career Operators New South Wales Government Railways Class TF939, D53 from 1924 Disposition 3 preserved, 187 scrapped

The D53 class was a class of 2-8-0 steam locomotives built for the New South Wales Government Railways of Australia.

History

This class of locomotive was designed by the New South Wales Government Railways as an improved version of the T class. All the coupled wheels had flanges and a certain amount of side movement was given to the middle pairs with a laterally operating knuckle joint being provided in the middle section of the coupling rods.

Clyde Engineering delivered the first locomotive in April 1912 and by November 1917, a total of 190 were in service. Most were fitted with superheaters when built and some fitted at a later date. There was a problem with the locomotives being unbalanced, causing speed restrictions to be imposed to avoid rough riding and track damage. Following further investigations, 24 of the class received balanced coupled wheels and these were permitted to operate at higher speed on mail and fruit trains.

When introduced, most of the class were fitted with a standard bogie tender, similar to those attached to the 50 class, although some saw service with large capacity "Wampu" tenders. In the later period of their lives, the majority were fitted with larger turret type tenders. In later years some were used as heavy shunting locomotives and from 1963 on some of these had automatic couplers fitted to the front.

Following the removal of the knuckle joints from the coupling rods, flanges from the second coupled and driving wheels and the fitting of boilers standard for 50 class; 53 class and 55 class, they became most useful locomotives.

The 24 not fitted with superheaters were scrapped in the 1930s. The first superheated example was withdrawn in January 1957 with the fleet down to 39 by July 1969 with the last withdrawn in January 1973.

The Commonwealth Railways used the design of these locomotives for their 26 strong KA class for the Trans-Australian Railway.

Preservation

Three have been preserved:

Preserved D53 class locomotives

Number	Builder	Year	Owner	Location	Status	References/Notes
5353	NSWGR	1913	Dorrigo Steam Railway and Museum	Dorrigo	Stored
5367	Clyde Engineering	1914	Lachlan Valley Railway	Cowra	Under overhaul
5461	Clyde Engineering	1916	Transport Heritage NSW	Valley Heights	Static Display

Locomotive 5461 is fitted with the last "Wampu" style tender and was known as 1174 in the pre-1924 numbering scheme. 1174 was known to be an exceptionally bad steamer and was the subject of many poems.

Gallery

• 
  5381 approaches Orange with a goods train.
• 
  Locomotive 5395 stands at Thirroul with a Workers' Train from Port Kembla

See also

• NSWGR steam locomotive classification