Jump to content

User:tavixVi/sandbox

From Wikipedia, the free encyclopedia

Currently just a place where I'm reworking init. Changes submitted soon.

[edit]
This page is about the Unix process. For other uses, see INIT (disambiguation).
Version 7 Unix: /etc listing, showing init and rc
Version 7 Unix: contents of an /etc/rc Bourne shell script

In Unix-based computer operating systems, init (short for initialization) is the first process started during booting of the computer system. Init is a daemon process that continues running until the system is shut down. It is the direct or indirect ancestor of all other processes and automatically adopts all orphaned processes. Init is started by the kernel using a hard-coded filename; a kernel panic will occur if the kernel is unable to start it. Init is typically assigned process identifier 1.

In Unix systems such as System III and System V, the design of init has diverged from the functionality provided by the init in Research Unix and its BSD derivatives. The usage in most Linux distributions employing a traditional init rather than a recent variant such as systemd is somewhat compatible with System V, while some distributions such as Slackware use BSD-style startup scripts, and others such as Gentoo have their own customized versions.

Several replacement init implementations have been created, attempting to address design limitations in the standard versions. These include launchd, the Service Management Facility, systemd and Upstart; as of March 2015, systemd has been adopted by several major Linux distributions although it remains controversial.

Research Unix-style/BSD-style

[edit]

Research Unix init ran the initialization shell script located in /etc/rc,[1] then launched getty on terminals under the control of /etc/ttys.[2] There are no runlevels; the /etc/rc file determines what programs are run by init. The advantage of this system is that it is simple and easy to edit manually. However, new software added to the system may require changes to existing files that risk producing an unbootable system.

BSD init was, prior to 4.3BSD, the same as Research UNIX's init;[3][4] in 4.3BSD, it added support for running a windowing system such as X on graphical terminals under the control of /etc/ttys.[5][6] To remove the requirement to edit /etc/rc, BSD variants have long supported a site-specific /etc/rc.local file that is run in a sub-shell near the end of the boot sequence.

A fully modular system was introduced with NetBSD 1.5 and ported to FreeBSD 5.0 and successors. This system executes scripts in the /etc/rc.d directory. Unlike System V's script ordering, which is derived from the filename of each script, this system uses explicit dependency tags placed within each script.[7] The order in which scripts are executed is determined by the rcorder script based on the requirements stated in these tags.

SysV-style

[edit]
Sysv-rc-conf, a TUI utility that selects which SysV-style init scripts will be run in each runlevel

When compared to its predecessors, AT&T's UNIX System III introduced a new style of system startup configuration,[8] which survived (with modifications) into UNIX System V and is therefore called the "SysV-style init".

At any moment, a running System V is in one of the predetermined number of states, called runlevels. At least one runlevel is the normal operating state of the system; typically, other runlevels represent single-user mode (used for repairing a faulty system), system shutdown, and various other states. Switching from one runlevel to another causes a per-runlevel set of scripts to be run, which typically mount filesystems, start or stop daemons, start or stop the X Window System, shutdown the machine, etc.

Runlevels

[edit]
Further information: Runlevel

The runlevels in System V describe certain states of a machine, characterized by the processes and daemons running in each of them. In general, there are eight runlevels, out of which three runlevels are considered "standard" as they are essential to the operation of a system:

0. Halt
1. Single user mode (also known as S or s)
6. Reboot

Aside from these standard ones, Unix and Unix-like systems treat runlevels somewhat differently. The common denominator, the /etc/inittab file, defines what each configured runlevel does in a given system.

Default runlevels

[edit]
Operating system Default runlevel
AIX 2
Gentoo Linux 3[9]
HP-UX 3 (console/server/multiuser) or 4 (graphical)
Slackware Linux 3
Solaris 3[10]
UNIX System V Releases 3.x, 4.x 2
UnixWare 7.x 3

On Linux distributions defaulting to runlevel 5 in the table on the right, runlevel 5 invokes a multiuser graphical environment running the X Window System, usually with a display manager like GDM or KDM. However, the Solaris operating system typically reserves runlevel 5 to shut down and automatically power off the machine.

On most systems, all users can check the current runlevel with either the runlevel or who -r command.[11] The root user typically changes the current runlevel by running the telinit or init commands. The /etc/inittab file sets the default runlevel with the :initdefault: entry.

On Unix systems, changing the runlevel is achieved by starting only the missing services (as each level defines only those that are started / stopped).[citation needed] For example, changing a system from runlevel 3 to 4 might only start the local X server. Going back to runlevel 3, it would be stopped again.

Replacements for init

[edit]

Traditionally, one of the major drawbacks of init is that it starts tasks serially, waiting for each to finish loading before moving on to the next. When startup processes end up I/O blocked, this can result in long delays during boot. Speeding up I/O, e.g. by using SSDs, may shorten the delays but it does not address the root cause.

Various efforts have been made to replace the traditional init daemons to address this and other design problems, including:

  • BootScripts in GoboLinux
  • busybox-init, suited to embedded operating systems, employed by OpenWrt before it was replaced with procd
  • DEMONS, a modification of the init start process by KahelOS, where daemons are started only when the DE (desktop environment) started[citation needed]
  • eINIT, a full replacement of init designed to start processes asynchronously, but with the potential of doing it without shell scripts[12]
  • Epoch, a single-threaded Linux init system focused on simplicity and service management[13]
  • Initng, a full replacement of init designed to start processes asynchronously
  • launchd, a replacement for init in Darwin/OS X/iOS/TvOS starting with Mac OS X v10.4 (it launches SystemStarter to run old-style 'rc.local' and SystemStarter processes)
  • Mudur, an init replacement written in Python and designed to start process asynchronously in use by the Pardus Linux distribution[14]
  • nosh, a suite of system-level utilities for initializing and running a BSD or Linux system, for managing daemons, terminals and logging[15]
  • OpenRC, a process spawner that utilizes system-provided init, while providing process isolation, parallelized startup, and service dependency; used by Gentoo and its derivatives
  • runit, a cross-platform full replacement for init with parallel starting of services, used by default in Void Linux
  • s6, another cross-platform full replacement for init, similar to runit[16]
  • Service Management Facility, a complete replacement/redesign of init from the ground up in illumos/Solaris starting with Solaris 10, but launched as the only service by the original System V-style init
  • Shepherd (formerly dmd), a GNU project for a service manager acting as a dependency-based init replacement[17]
  • systemd, a full replacement for init in Linux with concurrent starting of services and other features, used by influential Linux distributions
  • SystemStarter, a process spawner started by the BSD-style init in OS X prior to Mac OS X v10.4
  • Upstart, a full replacement of init designed to start processes asynchronously initiated by Ubuntu.

See also

[edit]

References

[edit]
  1. ^ init(8) – Version 7 Unix Programmer's Manual
  2. ^ ttys(5) – Version 7 Unix Programmer's Manual
  3. ^ init(8) – 4.2BSD System Manager's Manual
  4. ^ ttys(5) – 4.2BSD File Formats Manual
  5. ^ init(8) – 4.3BSD System Manager's Manual
  6. ^ ttys(5) – 4.3BSD File Formats Manual
  7. ^ Andrew Smallshaw (7 December 2009). "Unix and Linux startup scripts, Part 2".
  8. ^ "init(8)". minnie.tuhs.org.
  9. ^ "Initscripts". Gentoo Linux Documentation. Gentoo.org. 2011-03-02. Retrieved 2011-06-13.
  10. ^ "Oracle Documentation". Docs.sun.com. 2010-09-07. Retrieved 2011-06-13.
  11. ^ "UNIX man pages : runlevel (8)". Unixhelp.ed.ac.uk. 1997-05-27. Retrieved 2014-07-12.
  12. ^ "eINIT git repository XML module directory".
  13. ^ "Epoch Init System Homepage".
  14. ^ Gürer Özen, Görkem Çetin. "Speeding Up Linux: One Step Further With Pardus Pardus". Pardus.org.tr. Retrieved 2011-06-13.
  15. ^ Jonathan de Boyne Pollard. "The nosh package". Jonathan de Boyne Pollard. Retrieved 2015-08-02.
  16. ^ "s6 - skarnet's small supervision suite".
  17. ^ "The Shepherd - GNU Project". Free Software Foundation, Inc. Retrieved 2016-01-16.
[edit]

Category:Unix process- and task-management-related software

Retrieved from "https://en.wikipedia.org/w/index.php?title=User:TavixVi/sandbox&oldid=755061812"