Jump to content

Talk:.30-06 Springfield/Archive 1

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
Archive 1

Picture

Why is there a picture of a .303 British shell on the .30-06 Springfield article? It should be explained that the picture is of a contemporary but different cartridge.

Disregard, it turns out the same picture is used on most (all?) rifle cartridge pages. I don't know enough about templates, or I'd do this myself, but it'd be nice if someone put an indication in the caption that the picture is not of the cartridge the article focuses on.
  • Could someone provide a picture of this round next to a different round for scale? Possibly next to a .308 round, as the fact that they are different rounds with the same caliber can cause some confusion. Bad ideas 02:18, 23 January 2007 (UTC)
http://www.theboxotruth.com/docs/edu26.htm scroll down to the bottom of the page and the .308 is on the right and the .30-06 is on the right
This is a good idea, but I want to say that there shouldn't be any confusion from them being the "same." .30-06 Springfield and .308 Winchester are obviously different when written in the English/Standard system and in the Metric system (7.62x63mm Springfield and 7.62x51mm NATO respectively). -- Thatguy96 12:40, 23 January 2007 (UTC)
  • I don't have a picture but the .308 is a lot shorter the the .30-06. and the first sentence is weird, because the metric "name" for .308 is 7.62x51

References

Lots of good info in this article, but it lacks citations. We need to find references and annotate the article as appropriate. Arthurrh 00:28, 15 August 2007 (UTC)

GA review

I've failed the GA for a few reasons. The most obvious reason I found was that it was vastly undercited, particularly in the performance section. The "Cartridge dimensions" section will do better as a thumbnail picture. Try to also convert one or two of the bulleted lists into prose. Although there aren't any examples of ammunition GA's, you might want to look at M1 Garand, which is quite well written and cited. All in all, some more work should be done to improve the article to GA status. If you have any questions, please ask me. If you'd like to contest my decision, head to WP:GAR. bibliomaniac15 00:58, 23 November 2007 (UTC)

Weight and FPE

Those weights aren't right. I know for a fact that the don't make 9.7 grain 30/06 rounds.....That's way too light to have that much FPE. I thing someone forgot a couple of zero's or converted to grams.... —Preceding unsigned comment added by 71.145.141.57 (talk) 00:14, 30 December 2007 (UTC)

Merge M2 Ball

I think the article M2 Ball should be merged into this one. What do you all think ?
I put the templates in place and will add it to the to do list if everyone agrees. --Boris Barowski (talk) 15:39, 31 August 2008 (UTC)

Support: Performance specs can be added to the line in the .30-06 article on the M2 ball cartridge. -- Thatguy96 (talk) 16:20, 31 August 2008 (UTC)
Support: The M2 ball has a development history that can be summarized in two to five sentences. A separate article is silly. --Nukes4Tots (talk) 18:40, 20 September 2008 (UTC)

I fixed the link to Accurate Powders but the one to the Federal site remains broken. Someone might want to either delete it or correct it and then adjust the ballistics numbers to fit the new reference. Everyone who reloads knows that ballistics data varies considerably but we do need to have some numbers which make sense here. I'm not a 30-06 expert so will avoid the temptation to Fudd things up too badly. Regards.Trilobitealive (talk) 03:34, 10 February 2009 (UTC)

Poor data in the ballistic performance table

The data listed in the ballistic table, is poor. While the 150 grn and 165 grn listings are reasonably accurate, in the rest the velocities listed with the given bullet weights, are just not possible, without bullets with anti-friction coatings and/or dangerous amounts of powder.

The 180 grn loading in particular, has a weight and velocity combination that is more like something you would find from a .300 Remington Ultra Mag, rather than a 30-06. Without special coatings ( like molybdenum disulfide ) velocities attained by 180 grain bullets from the 30-06 are more typically going to be in the 2600-2800 fps range - maybe even up to the low to mid 2700 fps range ( at maximum loading ), but at these loadings people start running the risk of exceeding recommended chamber pressure of the 30-06. —Preceding unsigned comment added by Greg Har (talk • contribs) 17:48, 18 June 2009 (UTC)

  • The 30-06 with 180gr. bullets is very capable of attaining 2900fps. or more in commercial factory loadings for non semi/full auto weapons.(See: Federal High Energy, Hornady Light Magnum and Norma Oryx loadings for the 30-06. These loads are SAAMI congruent and are also measured in the military (CUP) Copper Units of Pressure or Crusher method and considered safe aswell. There are absolutely no chamber pressure risks involved in these commercial 30-06 loads. Safe SAAMI hand loads at 2900fps. for the 30-06 with 180gr. bullets are easily attainable where as similar loads for the .308win. are not! (See various loading Manuels) The 30-06 150gr.,165gr. and 200gr. bullet loads for this section are on the low side too! Federals High Energy 30-06 Trophy Bonded/180gr.@2900fps. from(www.ableammo.com/catalog) and Normas Oryx 200gr.@2625fps from (www.midway.com/view) product no.286754 are examples of modern 30-06 ammunition. The ammunition companies have modernized the 30-06, because of lost sales due to private or individual reloading. The 30-06 is the number 1 reloaded cartridge based on die and reloading sales in America!
  • Many ammunition companys such as: Federal, Hornady, Norma, Remington, Winchester etc. are now offering modern day loads that far exceed the 1930 loadings for the "06". As best I can tell the ballistic tables that you have provided are severely low on the velocity end for various bullet weights. Here are some typical modern 30-06 velocies by mfg. and bullet weight:
  • 1) Hornady Light Magnum 150grain@3100fps.
  • 2) Hornady Light Magnum 165grain@3015fps.
  • 3) Hornady light Magnum 180grain@2900fps.
  • 4) Federal High Energy 180grain@2887fps.
  • 5) Norma Oryx 200grain@2625fps.
  • If this web site is going to keep modern definitions on hand for the general public to make accurate comparisons, then it should change the ballistic tables utilizing more modern velocities rather than use old out-dated material!

MG.174.47.178.224 (talk) 03:48, 12 April 2010 (UTC)74.215.118.101 (talk) 11:36, 10 April 2010 (UTC) (Historian for the Nat'l Archives) —Preceding unsigned comment added by 74.215.118.101 (talk) 02:05, 10 April 2010 (UTC)

WikiProject Military history/Assessment/Tag & Assess 2008

Article reassessed and graded as start class. Referencingand appropriate inline citation guidelines not met. --dashiellx (talk) 11:14, 24 April 2008 (UTC) 9.7 grains is about 1 .177 pellet. Should be a hundred plus. — Preceding unsigned comment added by 66.109.88.249 (talk) 05:53, 28 August 2011 (UTC)

Interchangable with the 7.62x51mm NATO ?

Is this .30-06 Springfield interchangable with the 7.62x51mm NATO? if it is, it should be mentioned in the article.Gruoney (talk) 16:25, 26 August 2009 (UTC) 

    It is not interchangable. Vitae drinker (talk) 04:24, 25 November 2009 (UTC)

The 7.62 NATO is about .5 inch ( 12.7 mm ) shorter than the 30.06 Greg Har (talk) 15:03, 3 December 2009 (UTC)

I believe the 7.62x51mm NATO is supposed to be interchangeable with a .308 Winchester per the .308 article. Dachande (talk) 18:47, 11 November 2010 (UTC)

Wrong bullet diameter

The .30-06 uses a .308" bullet, not a .300" bullet as claimed in the specifications table. —Preceding unsigned comment added by Tchaika (talk • contribs) 00:44, 7 November 2010 (UTC)

During several automated bot runs the following external link was found to be unavailable. Please check if the link is in fact down and fix or remove it in that case!

--JeffGBot (talk) 02:59, 20 June 2011 (UTC)

During several automated bot runs the following external link was found to be unavailable. Please check if the link is in fact down and fix or remove it in that case!

--JeffGBot (talk) 03:01, 20 June 2011 (UTC)

Units

I've read the article and find it somewhat confusing. We have a mix of dominance between the metric and english units, especially in the Performance section. Being an American designed round with most specifications (especially the 1938 reference about test data) would neccessarily be in english units and as such should be accurate and dominant with approximate metrics parentheticized. Anything relating to any NATO or international changes could be metric, but in the US usage and history there shouldn't be a "X gram (N.nnn grain)". A 150 grain bullet AS DESIGNED should never have the grain (designed spec) as the secondary unit. 68.196.105.69 (talk) 21:56, 18 August 2011 (UTC)


yeah having cartridge dimensions is kinda silly, hand-loaders use the English system so this picture is basically useless. 68.82.143.169 (talk) 13:35, 24 May 2012 (UTC)Finch

.30 Gov't 06

Should there be some mention of the .30 Gov't 06 designation that this cartridge wore, for much of its life? — Preceding unsigned comment added by 67.185.128.163 (talk) 08:32, 27 August 2011 (UTC)

Pronunciation of the "0". Is it regional.

I reverted the addition of "less frequently" from the lead which stated "thirty-aught-six", or less frequently, "thirty-oh-six". I believe it's regional, with "aught" being almost universally used in the USA but I think "oh" being used in Australia and maybe the UK also. Any comments or suggestions.--Dmol (talk) 06:14, 2 May 2012 (UTC)

It's a US cartridge, so the pronunciation in other countries might be viewed as minor. The contemporary British cartridge was the three-oh-three, so "thirty-oh-six" would be reasonable.
Google turns up a debate for either [1]
Here's thirty-aught-six in a book
Here's thirty-oh-six in a book published in the US.
Google has about 5 times more hits for "thirty aught six", and 3 times more hits for "thirty ought six" (including some song lyrics).
Google("thirty oh six" isbn ".30-06" -wikipedia) gets 8 hits. They mostly give both pronunciations but aught is first.
Google("thirty aught six" isbn ".30-06" -wikipedia) gets 70,000. But even some of those give the "oh" version.
My gut tells me that oh-six is used "less frequently", but I don't have an RS that says that. I'm OK with "less frequently", but I'm also OK with leaving it out. The underlying origin is vestigal.
On another matter, the info box says the .30-06 is still "in service". I understand that phrase to be in military service, and there's seems little point to have both the .30-06 and the 7.62×51mm NATO.
Glrx (talk) 18:41, 3 May 2012 (UTC)

Energy Data Inaccurate?

I was going through the bullet mass, velocity and energy data and, not seeing the energies already listed, decided to calculate them myself. The energies I get just simply from the familiar kinetic energy (T = 1/2*m*v^2) and the current shown energy are:

Mass (gr) My Energy (ft*lbf) Shown Energy (ft*lbf)
150.0 2820.0 2820
165.0 2871.8 2872
180.0 2913.2 2913
200.0 2930.4 2932
220.0 3052.6 2981

As you can see they agree well for the first 3, the 4th energy is pretty close, but the last energy is very different. I noticed these results are cited, but they are inconsistent, so I'm wondering what's going on with these data.

74.243.202.171 (talk) 06:26, 31 August 2012 (UTC)

I noticed the same thing myself; and unfortunately they seem to be off on other cartridge infoboxes as well. These should be auto-computed by MediaWiki anyhow; see my proposal to implement this. David F (talk) 04:06, 13 June 2013 (UTC)

USMC .30-06 Model 70 in Vietnam?

Why is there no mention of the .30-06's use in Vietnam by the Marine Corps? — Preceding unsigned comment added by 76.190.232.213 (talk) 08:50, 8 September 2013 (UTC)

Clarification

"boat-tailed bullets was beyond the safety limitations of many ranges."

Could someone try and clarify what the article means by "range" in the quoted part of the article? I couldn't be sure what the hell it meant based on my limited knowledge of firearms and possible definitions of the word, and wasn't the point of the M1 to increase the range in the first place? Nor would I think they'd care too much about their rifle ranges to demand the War Department to change their rifle round -back- to the original instead of just compensating the ranges. Unless that was the intent, and I give the US Army too much credit intelligence-wise. -anon.

I took this to mean a shooting range. The article at this point was talking about using old ammunition for training. If the new ammunition was too powerful, it could shoot through the barriers at the end of the shooting range, posing a danger for other personnel. 64.136.195.215 (talk) 01:30, 21 October 2013 (UTC)

Incorrect/mistyped range information within the History section.

The following information contradicts other information on the page itself and outside of Wikipedia. (The following information is un-sourced; I do not feel knowledgeable enough about this round & rifle to state the true range.) Most information points to a range of only 1,000 yards. Much less than the stated 5,500 yards on this page.

In addition, I read and searched the source PDF for this informaion but as yet been unable to find the exact source of the stated 5,500 yard range.

" Its maximum range was approximately 5,500 yd (5,030 m).[1] "

  1. ^ FM 23-10 Basic Field Manual: U.S. Rifle Caliber .30, M1903, 20 September 1943 page 212

Mrwhite22 (talk) 00:19, 2 July 2014 (UTC)

The PDF has the 5500 yard claim for (M1, discontinued) on page 212 -- just as the citation stated. Range for M2 was 3450 yd. See history section for description of range safety. Glrx (talk) 00:46, 4 July 2014 (UTC)

More powerful claim

While the .30-06 is described as more powerful than the 6.5mm x50 Arisaka, this only holds true at shorter-medium ranges as the 6.5mm bullet holds velocity and energy better than the larger .30 bullet. — Preceding unsigned comment added by 86.30.132.216 (talk) 13:04, 15 August 2014 (UTC)

Hello fellow Wikipedians,

I have just modified one external link on .30-06 Springfield. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

☒N An editor has determined that the edit contains an error somewhere. Please follow the instructions below and mark the |checked= to true

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 02:41, 8 September 2016 (UTC)

The sound "Odd" seems much more common than "Aught"

By far the most common way I've heard the 30-06 referred is as "Thirty-odd-six". It almost certainly started as a mishearing of the "aught", but I have no reference for that. I can say though that folks are very often saying "odd", though the trailing d is an extremely close phoneme to a trailing t.Tgm1024 (talk) 16:11, 12 January 2017 (UTC)

I have never once heard anyone say it that way. Not questioning your experience, just giving you mine. 16:45, 12 January 2017 (UTC)
I've only heard it as "thirty-aught-six". The word "aught" makes sense because "naught" means zero (wikt:aught). "Thirty-odd-six" does not make sense; there's nothing "odd" about a zero. I take "odd" as a Lady Mondegreen. See (non-RS) http://www.urbandictionary.com/define.php?term=.30-06 See also Names for the number 0 in English; ought is used for the first decade of a century: Potts, 2000s (decade)#Name for the decade. Glrx (talk) 05:27, 18 January 2017 (UTC)

It's stated that the ballistic coefficient (BC) for M1 ball is 0.494. However the source claim that this BC is for M72 and M118 not explicitly M1 ball (it's not even mentioned). Sure the profile is similiar (7 caliber ogive and 9 degree boatttail) but shorter boattail length 0.225 while the m1 ball, according to hatcher's notebook, is based on M1925 match ammo which has length of 0.25. The diffrence is significantly affect BC since longer boattail will gave higher sectional density in the same profile. I believe the correct one is 0.56 as stated on the table at page 544 of "Hatcher's Notebook :A Standard Reference for Shooters, Gunsmiths, Ballisticians, Historians, Hunters and Collectors". — Preceding unsigned comment added by Kampfmesser (talk • contribs) 05:47, 28 March 2019 (UTC)

Retrieved from "https://en.wikipedia.org/w/index.php?title=Talk:.30-06_Springfield/Archive_1&oldid=1232393458"