Jump to content

Prosulfocarb

From Wikipedia, the free encyclopedia
Prosulfocarb[1][2]
Names
IUPAC name
S-Benzyl N,N-dipropylcarbamothioate
Other names
Prosulfocarb, A8545C
Identifiers
ECHA InfoCard 100.100.363 Edit this at Wikidata
Properties
C14H21NOS
Molar mass 251.39 g·mol−1
Appearance Colourless - pale yellow
Odor Aromatic
Density 1049 kg/m3[1]
Melting point -20 °C[3]
Boiling point 341 °C[3]
Insoluble[3]
Solubility in xylene Soluble[3]
Solubility in acetone Soluble[3]
Solubility in heptane Soluble[3]
Solubility in ethyl acetate Soluble[3]
Vapor pressure 0.79 mPa[3]
Hazards
GHS labelling:
GHS08: Health hazardGHS09: Environmental hazard
Warning
H227, H302, H317, H335, H371, H373, H401
Flash point 167.1 °C[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Prosulfocarb is a pre-emergent herbicide used agriculturally in Australia, the EU, Japan, New Zealand, (since 2020), Morocco and Iran, for control of annual ryegrass and toad rush in wheat and barley crops.[4][5][6][3] It was introduced to the EU in 1988 and is rapidly growing in use, with sales increasing by over 500% in France since 2008.[7]

Prosulfocarb is a thiocarbamate, and is absorbed by the roots of germinating seedlings to inhibit growth in the meristem by inhibiting fat synthesis,[4] of resistance HRAC Group J, (Aus),[4] K3/N, (Global), 15. (numeric)[8] Applying prosulfocarb repeatedly builds weed resistance but undoes trifluralin (Group 3) resistance, as they have opposing mechanisms: prosulfocarb is resisted by decreasing pesticide metabolism; trifluralin is resisted by increasing metabolism.[9]

Application

[edit]

To target annual ryegrass, 2.5L/ha (of 800 g/L emulsifiable concentrate) is prepared and sprayed before sowing. It can be applied to barley post-emergence, but if applied wrongly may cause crop damage.[10] Prosulfocarb does not need much moisture to be applied efficably, due to low volatility.[11]

Prosulfocarb is often applied alongside s-Metolachlor and pyroxasulfone, or in Australia with trifluralin, with which it more efficiently circumvents weed resistance.[12]

Prosulfocarb prevents target weeds from germinating, or failing that, the shoots grow swollen and bright green.[10]

Toxicology

[edit]

Prosulfocarb's LD50 toxicity is 1820 mg/kg orally for rats,[2] which is comparable to paracetamol. The human toxicological effect is low.[7] Prosulfocarb itself is not a combustible, but formulations can be due to other components. (e.g. solvent naphtha)[13] Prosulfocarb is an irritant.[3]

What limited mammalian toxicity exists, seems to affect the liver and kidneys, and in long-term studies, reduces appetite. Evidence does not show any carcinogenicity or genotoxicity. No toxic effect on the reproduction is shown. Prosulfocarb may have weak teratogenic potential, though there is no convincing evidence for it.[14]

Environmental effect

[edit]

Prosulfocarb is toxic to aquatic organisms; it is mandatory in Australia not to spray it within 20 metres upwind of aquatic or wetland areas or to apply by air. Nor if heavy rain is expected, to prevent runoff.[4] It is not persistent in soil, with a halflife of 35 days. Prosulfocarb bioaccumulates, and has slight mobility in soil.[13] Prosulfocarb's halflife in water (measured in ditches) is only 2.9 days.[15]

Production

[edit]

Global herbicide production is in TGAC form, typically 95-98% purity, whence it is shipped and locally formulated into commercially practical formulations, a mix with a solvent such as solvent naptha[13] and other agents to make good mixing behaviour. Tech production is often in the USA, Japan, China, and India, the top four global agrochemical producers.[16] Hermani, in Bharuch, India, has the capacity for 5000 tonnes of technical per year; Punjab Chemicals, in Dera Bassi, another 3000;[17] Weifang Sino-Agri, China, another 1000 tonnes per year.[18]

Synthesis

[edit]

Prosulfocarb is synthesised by combination of dipropyl amine and phosgene, the amine replacing a chlorine atom, and this is then combined with benzyl mercaptan which takes the place of phosgene's other chlorine atom. The other order, adding the mercaptan to phosgene first, is also possible.[19]

Lists

[edit]

These lists are non-exhaustive.

Prosulfocarb has been used to control the following weeds: annual ryegrass, Lolium rigidum,[4] which is highly resistant to other herbicides, notably glyphosate, barley grass, toad rush, red and white fumitory, paradoxa grass (canary grass), Phalaris spp., sand fescue, silver grass (Vulpia spp.), soil surface wild oats, wireweed (hogweed), suppression of brome grass, deadnettle, rough poppy and yellow burr weed.[20]

Prosulfocarb has been applied to the following crops: wheat and barley.[4]

Prosulfocarb has been sold under these tradenames: Prosulfocarb 800, (4Famers, Genfarm, Reylon), Profuse, Arcade, (Syngenta), Countdown, Boxer Gold, (combination with s-Metolachlor), Defi, and Dian.

References

[edit]
  1. ^ a b c "Prosulfocarb SDS" (PDF). ChemicalBook. Retrieved 5 August 2024.
  2. ^ a b "Prosulfocarb Standard SDS" (PDF). FujiFilm. Retrieved 5 August 2024.
  3. ^ a b c d e f g h i j "Prosulfocarb (Ref: SC 0574)". Pesticide Properties DataBase. Retrieved 8 August 2024.
  4. ^ a b c d e f "4Farmers Australia Prosulfocarb Leaflet" (PDF). www.4farmers.com.au. 4Farmers Australia. Retrieved 5 August 2024.
  5. ^ "Prosulfocarb 800 Label" (PDF). GenFarm. Retrieved 5 August 2024.
  6. ^ "Permission granted for new potato protector". www.epa.govt.nz. 10 August 2020.
  7. ^ a b Devault, Damnien; Guillemin, Jean-Philippe; Maurice, Millet; Eymery, Frank (January 2022). "Prosulfocarb at center stage!". Environmental Science and Pollution Research. doi:10.1007/s11356-019-06928-8. Retrieved 5 August 2024.
  8. ^ "2024 HRAC Global Herbicide MOA Classification Master List". Herbicide Resistance Action Committee.
  9. ^ Busi, Roberto; Goggin, Danica E; Onofri, Andrea; Boutsalis, Peter; Preston, Christopher; Powles, Stephen B; Beckie, Hugh J (December 2020). "Loss of trifluralin metabolic resistance in Lolium rigidum plants exposed to prosulfocarb recurrent selection". Pest Management Science. 76 (12): 3926–3934. doi:10.1002/ps.5993.
  10. ^ a b "4Farmers Prosulfocarb 800 EC Infosheet" (PDF). www.4farmers.com.au. 4Farmers Australia. Retrieved 5 August 2024.
  11. ^ "Australia - Give your barley growers value through efficacy and flexibility in ARG control". Grainews.
  12. ^ Kleemann, Samuel G. L.; Preston, Christopher; Gill, Gurjeet S. (2014). "Influence of Seeding System Disturbance on Preplant Incorporated Herbicide Control of Rigid Ryegrass (Lolium rigidum) in Wheat in Southern Australia" (PDF). Weed Technology (28): 323–331. Retrieved 5 August 2024.
  13. ^ a b c "4Farmers Prosulfocarb Herbicide Safety Data Sheet" (PDF). 4farmers.com.au. 4Farmers Australia. Retrieved 5 August 2024.
  14. ^ "Conclusion regarding the peer review of the pesticide risk assessment of the active substance prosulfocarb". www.efsa.europa.eu. 28 August 2007. doi:10.2903/j.efsa.2007.111r.
  15. ^ Adriaanse, Paulien I; Boesten, Jos JTI; Crum, Steven JH (June 2013). "Estimating degradation rates in outdoor stagnant water by inverse modelling with TOXSWA : a case study with prosulfocarb". Pest Management Science. 69 (6): 755–767. doi:10.1002/ps.3435.
  16. ^ "22 active ingredient patents to expire by 2030: What it means for Indian agrochemical companies". Grainews.
  17. ^ "Will India's Herbicide Boom Year Continue?". Grainews.
  18. ^ "Weifang Sino-Agri Union's 1,000-tons prosulfocarb technical project completed". Grainews.
  19. ^ Unger, Thomas A. (1996). Pesticide synthesis handbook (1st ed.). Noyes Publications. p. 115.
  20. ^ "Prosulfocarb 800 Label" (PDF). Reylon.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Prosulfocarb&oldid=1255835755"