Jump to content

Herne Windmill

Coordinates: 51°21′19″N 1°8′13″E / 51.35528°N 1.13694°E / 51.35528; 1.13694
From Wikipedia, the free encyclopedia

Herne Windmill
Map
Origin
Grid referenceTR 185 665
Coordinates51°21′19″N 1°8′13″E / 51.35528°N 1.13694°E / 51.35528; 1.13694
Operator(s)Kent County Council
Year built1789
Information
PurposeCorn mill
TypeSmock mill
StoreysThree-storey smock
Base storeysTwo-storey base
Smock sidesEight-sided
No. of sailsFour
Type of sailsDouble Patent sails
WindshaftCast iron
WindingFantail
Fantail bladesSix blades
Auxiliary powerSteam engine
Oil engine
Electric motor since 1952
No. of pairs of millstonesThree
Other informationOriginally built on a single-storey base, raised in 1858 to two storeys

Herne Windmill is a Grade I listed[1] smock mill in Herne, Kent, England, that was built in 1789.

History

[edit]

Herne Windmill was built by John Holman in 1789 when he was working for Sweetlove, the Wingham millwright.[2] There are records of a windmill in Herne as early as 1405.[3] The mill replaced an earlier post mill that was standing in 1511 and was marked on Philip Symonson's map of 1596, John Speed's map of 1611, Robert Morden's map of 1695, Emanuel Bowen's map of 1736 and Andrews, Drury and Herbert's map of 1769. In 1858, the mill was raised, and a two-storey brick base built underneath it. A new iron worm was fitted in 1931, replacing the old wooden one.[2] In the 1930s, the mill was working on two sails only. Frank Wootton, the miller, sought the assistance of the Society for the Protection of Ancient Buildings (SPAB), and after Rex Wailes made a report on the mill, two sails from the Black Mill, Forncett End, Norfolk were fitted by Thomas Hunt of Soham, Cambridgeshire in 1936. A new pair of sails was constructed by Hunt, the work being made possible by support from SPAB, the Duchess of Kent and Trinity House. The latter assisted as the mill was marked as a navigational landmark for shipping. The mill worked by wind until 1952, assisted latterly by a steam engine, then an oil engine. After that date, milling was done with an electric motor supplying the power.[3] Milling continued with the electric motor until 1980.[4]

On 21 May 2020 the sails were removed during the first lockdown of the COVID-19 pandemic.

Description

[edit]

Herne Mill has a three-storey smock on a two-storey brick base. It has four double patent sails carried on a cast-iron windshaft, housed in a Kentish-style cap. The mill is winded by a fantail. There is a stage at a level between the first and second floor.[2] The Brake Wheel is composite, with an iron centre and a wooden rim. It drives a wooden compass arm Wallower on a wooden Upright Shaft. This carries a wooden compass arm Great Spur Wheel. The mill drives three pairs of millstones overdrift.[5]

New sails were fitted in 2004. These measure 33 ft 3+34 in (10.15 m) long by 5 ft 10+34 in (1.80 m) wide each, with a total span of 68 feet 8 inches (20.93 m). The work was carried out by IJP Millwrights of Binfield Heath, Berkshire.[6]

Millers

[edit]
  • Webb
  • (Job) Lawrence & Sons (John and Edward) 1795 - 1879
  • John Lawrence (nephew of Job) 1763 - 1840
  • Edward Lawrence 1845 -
  • Thomas Wootton 1879 - 1928
  • Frank Wootton
  • R C & E E Wootton
  • Clive Wootton 1925 - 1980

Robert Wootton

References for above:-[2][3][7]

References

[edit]
  1. ^ Historic England. "HERNE WINDMILL, MILL LANE (north side), HERNE AND BROOMFIELD, CANTERBURY (1084984)". National Heritage List for England. Retrieved 17 April 2008.
  2. ^ a b c d Coles Finch, William (1933). Watermills and Windmills. London: C W Daniel Company. pp. 221–222.
  3. ^ a b c West, Jenny (1973). The Windmills of Kent. London: Charles Skilton Ltd. pp. 46–49. ISBN 0-284-98534-1.
  4. ^ "HERNE WINDMILL". Favonius. Retrieved 16 April 2008.
  5. ^ Reynolds, John (1974). Windmills and Watermills (2nd ed.). London: Hugh Evelyn Ltd. p. 106. ISBN 0-238-78943-8.
  6. ^ "PROJECT SUPERVISION for IJP Building Conservation Ltd at Herne windmill, Kent". Bonwick Milling Heritage Consultancy. Retrieved 16 April 2008.
  7. ^ "Directory of Kent Mill People". The Mills Archive Trust. Archived from the original on 16 April 2009. Retrieved 16 April 2008.
[edit]