Jump to content

GWR 1500 Class

From Wikipedia, the free encyclopedia

Great Western Railway 1500 Class
No. 1502 at Didcot 1957
Type and origin
Power typeSteam
DesignerFrederick Hawksworth
BuilderSwindon Works
Order numberLot 373
Build date1949
Total produced10
Specifications
Configuration:
 • Whyte0-6-0PT
 • UICCh2tg
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.4 ft 7+12 in (1.410 m)
Minimum curve3+12 chains (231 ft; 70 m)
Wheelbase12 ft 10 in (3.91 m)
Loco weight58 long tons 4 cwt (130,400 lb or 59.1 t) (62.9 short tons)
BoilerGWR Standard No. 10[1]
Boiler pressure200 lbf/in2 (1.4 MPa)
CylindersTwo, outside
Cylinder size17.5 in × 24 in (444 mm × 610 mm)
Valve gearWalschaerts
Valve typepiston valves
Performance figures
Tractive effort22,515 lbf (100.15 kN)
Career
OperatorsBritish Railways, National Coal Board
Power classGWR: C
BR: 4F
Numbers1500–1509
Axle load classGWR: Red
LocaleWestern Region
WithdrawnBR: 1959–1963,
NCB: 1970
DispositionOne preserved, remainder scrapped

The Great Western Railway (GWR) 1500 Class is a class of 0-6-0 pannier tank steam locomotive. Despite being a GWR Hawksworth design, all ten (nos 1500–1509) were completed under the administration of the Western Region of British Railways in 1949, just after Nationalisation.

Overview

[edit]

Coming from a railway company with a well-developed standardisation policy, the 15xx was a strange design finale. Unlike almost all their forebears, they had outside cylinders, Walschaerts valve gear, and a very short wheelbase of 12 ft 10 in (3.91 m) to go round curves of 3.5 chains (231 ft; 70 m). Above footplate level they were very similar to the 9400 class, and shared the same Standard No. 10 boiler. The major difference was below the (very small) footplate, where they resembled the USATC S100 Class that the GWR and other railways had used during the Second World War.

Although a functional design, the class had limited usefulness as they were route-restricted by their high weight and were unsuitable for fast running because of their short wheelbase. Largely confined to empty stock workings at London Paddington station, their lives were short; for example 1509 lasted barely ten years in BR service. Four of the class, 1506 to 1509, were based in Wales, Newport Pill, Ebbw Junction & Cardiff Canton, 1508[2] was withdrawn from that last shed. Like the 1600 and 9400 classes, their construction now appears to have been of doubtful value.

The onset of dieselisation and the decline in traffic on the railway network meant the 1500s were withdrawn and scrapped while still in workable condition. However No. 1501 has seen regular use at the Severn Valley Railway in preservation, much longer than its life in BR ownership.

Year Quantity in
service at
start of year
Quantity
withdrawn
Locomotive number(s)
1959 10 1 1509
1960 9 0
1961 9 2 1501-2
1962 7 2 1505/8
1963 5 5 1500/3-4/6-7

Preservation

[edit]
1501 after restoration in 2012 and wearing the early BR lined black scheme

1501 was one of the first of the class to be withdrawn in 1961, but was sold along with 1502 and 1509 to the National Coal Board for use at Coventry Colliery. The three locos were sent to Andrew Barclay Sons & Co., in Kilmarnock, Scotland for overhaul before delivery to the NCB. All three locomotives were purchased in 1970 by the Severn Valley Railway. Locomotives 1502 and 1509 were used as sources of spares for the restoration of 1501. The remains of 1502 and 1509 were scrapped at Cashmore's, Great Bridge in October 1970.

In 2006 No. 1501's boiler certificate expired and it was withdrawn from traffic. The locomotive was overhauled and steamed again in August 2012. It was repainted in British Railways lined black colour scheme with the early BR emblem on its tanks, a livery not normally used on shunting locomotives but carried by classmates 1501 and 1503 while at Old Oak Common.[3] It was withdrawn from service again at the start of 2023 and will require a full overhaul before any further use. [4]

See also

[edit]
  • GWR 0-6-0PTlist of classes of GWR 0-6-0 pannier tank, including table of preserved locomotives

References

[edit]
  1. ^ Champ, Jim (2018). An Introduction to Great Western Locomotive Development. Barnsley: Pen & Sword Transport. p. 320. ISBN 978-1-4738-7784-9. OCLC 1029234106. OL 26953051M.
  2. ^ Daniel, John. "'1500' tank class details". The Great Western Archive. Retrieved 2 December 2014.
  3. ^ Severn Valley Railway News Issue 179, Autumn 2012, Pages 8-9
  4. ^ "Severn Valley pair bow out following 10 years in service". Heritage Railway. No. 302. 20 January 2023. pp. 14–15.
  • le Fleming, H. M. (April 1958). White, D. E. (ed.). The Locomotives of the Great Western Railway, part five: Six-coupled Tank Engines. RCTS. ISBN 0-901115-35-5. OCLC 500544510.
  • Whitehurst, Brian (1973). Great Western Engines, Names, Numbers, Types and Classes (1940 to Preservation). Oxford, UK: Oxford Publishing Company. pp. 18, 81, 101. ISBN 978-0-9028-8821-0. OCLC 815661.
[edit]