CANT 12
| CANT 12 | |
|---|---|
| Role | Flying boat trainer |
| Manufacturer | CANT |
| Designer | Raffaele Conflenti |
| First flight | 1926 |
| Primary user | Regia Marina |
| Number built | 1 |
The CANT 12 was a flying boat and training aircraft that was produced in Italy in the 1920s.
Design
[edit]The CANT 12 was a traditional center-shaped seaplane for the era. The hull was characterized by an open cockpit in an advanced position that ended posteriorly in a single-headed cruciform fletching and horizontal braced planes. The wing configuration was biplana, with wings of equal size connected to each other by a series of uprights and tie rods, with the lower one equipped with small floating balancers. The propulsion was entrusted to a single Isotta Fraschini V.6 engine, an air-cooled six-cylinder V engine capable of delivering a power of 250 bhp (190 kW), mounted in a pivotal configuration and connected to a two-bladed wooden propeller fixed.
Development
[edit]The CANT 12 was developed in 1926 as a variant of the previous CANT 7. The prototype was built at the Monfalcone shipyard but after flight test results were unsatisfactory and the development program was cancelled.
Specifications
[edit]Data from [1]
General characteristics
- Crew: 3
- Length: 9.15 m (30 ft 0 in)
- Wingspan: 11.80 m (38 ft 8 in)
- Empty weight: 935 kg (2,061 lb)
- Gross weight: 1,350 kg (2,976 lb)
- Powerplant: 1 × Isotta Fraschini V.6 6-cylinder water-cooled in-line piston engine , 187 kW (250 hp)
Performance
- Maximum speed: 165 km/h (103 mph, 90 kn)
- Endurance: 4 hours
See also
[edit]Related lists
References
[edit]- ^ "Archived copy". www.giemmesesto.org. Archived from the original on 5 March 2016. Retrieved 12 January 2022.
{{cite web}}: CS1 maint: archived copy as title (link)
Further reading
[edit]- Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 269.
