Butler railway station
Butler | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
General information | |||||||||||
Location | Butler Boulevard, Exmouth Drive Butler, Western Australia Australia | ||||||||||
Coordinates | 31°38′08″S 115°42′01″E / 31.635547°S 115.700269°E | ||||||||||
Owned by | Public Transport Authority | ||||||||||
Operated by | Public Transport Authority | ||||||||||
Line(s) | Yanchep line | ||||||||||
Distance | 40.7 km (25.3 mi) from Perth Underground | ||||||||||
Platforms | 2 side platforms | ||||||||||
Tracks | 2 | ||||||||||
Bus routes | 6 | ||||||||||
Bus stands | 6 | ||||||||||
Bus operators | Swan Transit | ||||||||||
Construction | |||||||||||
Parking | 891 spaces | ||||||||||
Accessible | Yes | ||||||||||
Other information | |||||||||||
Fare zone | 5 | ||||||||||
History | |||||||||||
Opened | 21 September 2014 | ||||||||||
Passengers | |||||||||||
March 2018 | 2,750 per weekday | ||||||||||
Services | |||||||||||
| |||||||||||
|
Butler railway station is a suburban railway station in Butler, a suburb of Perth, Western Australia. It is on Yanchep line, which is part of the Transperth rail network. Originally known as the Joondalup line, planning for an extension to Butler began in the late 1990s. The station was built as part of a A$240 million extension of the Joondalup line from Clarkson to Butler. Construction began on the station on 16 July 2012, and was completed on 16 May 2014, opening on 21 September 2014. On 14 July 2024, an extension north to Yanchep station opened, coinciding with the line's renaming to the Yanchep line.
Butler station has two side platforms situated in a cutting below the surrounding ground level. It is accessed from a ground-level concourse. Services run every 10 minutes during peak and every 15 minutes between peak. The journey to Perth Underground station is 40.7 kilometres (25.3 mi) and takes 38 minutes. The station is served by six regular bus routes, operated by Swan Transit under contract. To the south, these bus routes link to Clarkson station, and to the north, these bus routes link to Alkimos station.
Description
[edit]Butler station is in Butler, a suburb of Perth, Western Australia. It is located east of Exmouth Drive and north of Butler Boulevard.[1] It is 40.7 kilometres (25.3 mi),[2] or a 38 minute train journey, from Perth Underground station along the Yanchep line, placing the station in fare zone five. The next station to the south is Clarkson station and the next station to the north is Alkimos station.[3]
The station consists of two side platforms situated in a cutting below ground level. The platforms are approximately 150 metres (490 ft) long, or long enough for a Transperth six-car train. At ground level is a concourse which can be used to cross over the railway or access the station. Operating hours are from approximately 5 am to 1 am, extending to 2 am on Friday and Saturday nights.[3] Outside station operating hours, the concourse is locked.[4]: 19 Each platform is served by an escalator, a lift, and a set of stairs, making it fully accessible. On the concourse are toilets, a kiosk, a customer service office and fare gates.[1] It has 891 car parking bays.[5] The station, designed by Coniglio Ainsworth Architects,[6][7] received a commendation at the 2015 WA Architecture Awards.[8][9]
Running along the 38-metre (125 ft) long station concourse wall is a piece of public art titled Rain on Water, by Geoffrey Drake-Brockman. The artwork consists of 1,200 aluminium rods with various lengths. Each rod has a brightly coloured end, with the colour depending on the height of the aluminium rod; shorter rods being on the blue end of the spectrum, and longer rods being on the red end of the spectrum. The artwork represents the ripples from raindrops falling on water, with mathematical modelling used to determine the height of each rod to make the piece of art look like a realistic wave.[10][11]
History
[edit]The original stage of the Joondalup line began construction in November 1989.[12] It was opened between Perth station and Joondalup station on 20 December 1992,[13] and extended to Currambine station on 8 August 1993.[14] An extension to Clarkson station opened on 4 October 2004.[15]
Planning and construction
[edit]During planning for the Joondalup line extension from Currambine station to Clarkson station in the late 1990s and early 2000s, it was recognised that the Joondalup line would be eventually extended north of Clarkson. Two potential stations were recognised: a park-and-ride station at Lukin Drive, called Butler station; and a station north of that, surrounded by a transit oriented development, called Brighton station. The name "Brighton" is a commonly used, but unofficial name for part of Butler.[16] A$2.1 million was allocated in the 2007 state budget for planning the extension to Butler.[17]
Before the 2008 Western Australian state election, both the Labor and Liberal parties promised to extend the Joondalup line to Butler. After the Liberal Party formed government following the election, Transport Minister Simon O'Brien said in 2009 that it was hoped that construction would start in 2011–12, and the extension would open in 2014. At the time, the number of stations on the extension was not decided.[18]
In November 2009, the government introduced the Railway (Butler to Brighton) Bill into Parliament.[19] The railway extension had a predicted cost of $240 million, a length of 7.5 kilometres (4.7 mi), and one station at the end of the extension, known then as Brighton station. The opposition criticised the plan to not build the station at Lukin Drive. O'Brien defended the choice of building only one station, saying that the Public Transport Authority told him it was a better idea to do so.[20] The plan called for Brighton station to be a park and ride station, as the previously planned station at Lukin Drive was not going to be built.[4]: 16 At this time, preliminary earthworks had begun.[20][21] The bill passed in July 2010.[22][23]
The first of the main contracts for the project was awarded to R J Vincent & Co in December 2010. The contract was worth $6 million, and was for 4 kilometres (2.5 mi) of earthworks between the entrance of the Nowergup depot near Hester Avenue, and Landbeach Boulevard, joining up with the earthworks done previously north of Landbeach Boulevard.[24][25] The earthworks for double tracks had already been completed during the construction of a single track between Clarkson station and Nowergup depot.[16] The next major contract was awarded on 20 May 2011[12] to a joint venture between Bocol Constructions and R J Vincent & Co. The $9.8 million contract was for the construction of bridges across the railway corridor and associated roadworks. The bridges were at Butler Boulevard, Landbeach Boulevard and Benendin Avenue. The contract also included the construction of 1.8 kilometres (1.1 mi) of Principal Shared Path.[26][27] Bocal constructed the bridges and concrete walls; R J Vincent did the road construction, earthworks, traffic management, and everything else not under Bocal's scope.[27] The station design was approved by a Joint Development Assessment Panel on 5 December 2011.[4][28] A $22 million contract for the construction of Butler station was awarded to Cooper and Oxley in July 2012,[6][7] and construction on the station began on 16 July 2012.[12]
By October 2012, earthworks and the construction of the three bridges were complete. That month, construction on the railway tracks and overhead power lines began, after the $24 million contract for that was awarded to John Holland. 13 kilometres (8.1 mi) of track was laid between Clarkson station and Butler station, and 5.4 kilometres (3.4 mi) of track in the Nowergup depot. The single track between Clarkson station and Nowergup depot was duplicated, and a double track was constructed between Nowergup depot and Butler station.[29] In November 2012, a $19.7 million contract was signed with Ansaldo STS Australia to design and construct the railway signalling system for the extension.[30][31] Included in the funding for the project were four new Transperth B-series trains and 11 new buses.[32][33] The construction of the station was completed on 16 May 2014.[12] Over the following months, works on the tracks, signalling and overhead electrical systems continued.[33]
Commissioning and opening
[edit]The first train ran on the extension on 25 August 2014,[12] with train driver familiarisation beginning after that.[34] The station was opened on 21 September 2014 by Premier Colin Barnett and Minister for Transport Dean Nalder, several months early and $20 million under budget.[35][36][37][38]
Some nearby residents experienced excessive vibrations when trains passed their homes. 178 people signed a petition saying that they and their homes were "severely and adversely impacted" by vibrations from trains.[39][40] 850 metres (2,790 ft) of acoustic matting was used for the extension, but it was not used for the tracks closest to Butler station, where the complaints were coming from. Nalder said that computer modelling was used to determine where to place the acoustic matting, based on ground conditions, geography and track geometry. He also said that the PTA would monitor noise and vibrations over the coming months.[40] On 12 October 2014, 50 residents gathered around the railway line to protest against the vibrations. Opposition leader Mark McGowan, Member for Butler John Quigley and Shadow Transport Minister Ken Travers attended the protest as well. McGowan said that the 850 metres (2,790 ft) of matting was not enough. Nalder reiterated that the government was undertaking vibration monitoring.[41][42] In December 2014, the results of noise monitoring were released. The monitoring found that noise and vibration levels near Butler station were within acceptable standards, but noise and vibrations were above acceptable levels at Kilkee Street, near Nowergup depot. The PTA said that a larger earth noise wall would be built there.[43]
Before opening, the projected patronage for the station was 2,000 people per day.[32][44] The station reached that patronage nine days after opening. In August 2015, the station had 2,022 daily boardings, with a total of 600,000 in its first year of operation. Boardings on buses in the surrounding area were also up by 13% compared to before the station opened.[45][46][47] In March 2018, Butler station had approximately 2,750 boardings on an average weekday, making it the seventh busiest station on the Joondalup line.[48]
Railway extension north of Butler
[edit]In late 2019, construction started on extending the Joondalup line north 14.5 kilometres (9.0 mi) to Yanchep, with three new stations. As part of the extension, the platforms at Butler station were lengthened.[49][50] The extension to Yanchep opened on 14 July 2024.[51][52]
Services
[edit]Butler station is served by the Yanchep line on the Transperth network.[3] Services are operated by the Public Transport Authority.[53] The line goes between Yanchep station and Elizabeth Quay station in the Perth central business district, continuing south from there as the Mandurah line. Yanchep line trains depart the station every 10 minutes during peak on weekdays, and every 15 minutes outside peak, and on weekends and public holidays. Christmas Day has a different timetable to other public holidays. At night time, trains are half-hourly or hourly.[3]
Stop | Platform | Line | Stopping pattern | Destination | Notes |
---|---|---|---|---|---|
99921 | 1 | Yanchep | All stations | Elizabeth Quay | |
99922 | 2 | Yanchep | All stations | Yanchep |
The bus interchange has six bus stands with 8 regular bus routes. Buses run to Clarkson railway station, Alkimos railway station, and Trinity Estate in Alkimos. Train replacement buses operate on route 904.[55] Bus services are operated by Swan Transit under contract.[56][57]
Stop | Route | Destination / description | Notes |
---|---|---|---|
Stand 1 | 481 | to Clarkson station via Marmion Avenue & Santa Barbara Parade[58] | |
482 | to Clarkson station via Marmion Avenue[59] | ||
904 | Rail replacement service to Perth station | ||
Stand 2 | 483 | to Clarkson station via Merriwa[60] | |
484 | to Clarkson station via Ridgewood[61] | ||
Stand 3 | 485 | to Alkimos station via Mirrabillis Avenue[62] | Services to commence after completion of Mirrabillis Avenue[62] |
Stand 4 | Set down only | ||
Stand 5 | 486 | to Alkimos station via Marmion Avenue[63] | |
904 | Rail replacement service to Yanchep station | ||
Stand 6 | 487 | to Alkimos (Trinity Estate) via Santorini Promenade & Piazza Link[64] | |
488 | to Alkimos (Trinity Estate) via Benenden Avenue[65] |
References
[edit]- ^ a b "Butler Station – Access Map" (PDF). Transperth. Archived (PDF) from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Manual – Rail Access" (PDF). Public Transport Authority. 30 August 2021. p. 10. Archived (PDF) from the original on 21 September 2021. Retrieved 20 September 2021.
- ^ a b c d "Yanchep Line Train Timetable" (PDF). Transperth. Retrieved 14 July 2024.
- ^ a b c "Metropolitan North West Joint Development Assessment Panel Agenda". Department of Planning. 5 December 2011. pp. 12–21. Archived from the original on 3 September 2013. Retrieved 16 October 2021.
- ^ "Butler Station". Transperth. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ a b "Work to start on Butler station". Public Transport Authority. 17 July 2012. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ a b "Butler train station works to begin". The West Australian. 8 June 2012. Archived from the original on 6 October 2021. Retrieved 6 October 2021.
- ^ "2015 WA Architecture Awards". Architecture AU. 3 July 2015. Archived from the original on 17 April 2017. Retrieved 6 October 2021.
- ^ Anderson, Alyesha (4 July 2015). "Fiona Stanley Hospital wins accolades at WA Architecture Awards". PerthNow. Archived from the original on 6 October 2021. Retrieved 6 October 2021.
- ^ "Butler Station : Rain on Water". Public Transport Authority. Archived from the original on 15 September 2021. Retrieved 15 October 2021.
- ^ Jarvis, Lucy (25 March 2014). "Butler station work running to schedule". PerthNow. Archived from the original on 26 October 2021. Retrieved 15 October 2021.
- ^ a b c d e "Our history". Public Transport Authority. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Acott, Kent (18 December 2017). "Joondalup and Mandurah train lines celebrate significant anniversaries". The West Australian. Archived from the original on 14 November 2021. Retrieved 1 December 2021.
- ^ "Opening of Currambine railway station next month". Media Statements. 17 July 1993. Archived from the original on 16 February 2016. Retrieved 1 December 2021.
- ^ "Gallop Government delivers northern rail extension on time and budget". Media Statements. 4 October 2004. Archived from the original on 1 December 2021. Retrieved 1 December 2021.
- ^ a b Urban Rail Planning & Implementation Steering Committee (2000). Northern Suburbs Transit System – Currambine to Butler Extension – Interim Master Plan. Department of Transport, Urban Rail Development. p. 39. ISBN 0730724077. Accessed at J S Battye Library, Perth
- ^ "Preparations for Clarkson-Jindalee rail extension steps up". Media Statements. 22 May 2007. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Sonti, Chalpat (29 July 2009). "Just how bad are Perth's train lines?". WAtoday. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Liberal-National Government gives green light to Joondalup rail extension". Public Transport Authority. 28 November 2009. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ a b "Libs give green light to $240m Joondalup rail extension". PerthNow. 26 November 2009. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Butler rail plans 'disappointing'". ABC News. 27 November 2009. Archived from the original on 6 October 2021. Retrieved 6 October 2021.
- ^ "Butler to Brighton railway extension moves closer". Media Statements. 13 July 2010. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Joondalup rail line extension closer". Business News. 13 July 2010. Archived from the original on 6 October 2021. Retrieved 6 October 2021.
- ^ Quinn, Russell (8 December 2010). "RJ Vincent wins $6m Joondalup rail contract". PerthNow. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Government contract kicks off Joondalup rail line extension". Public Transport Authority. 8 December 2010. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Bridges contract awarded for Butler extension". Public Transport Authority. 21 May 2011. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ a b "Butler Rail 3 Bridges Over Rail". R J Vincent. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Minutes of the Metropolitan North-West – Joint Development Assessment Panel (JDAP)". Department of Planning. Archived from the original on 27 April 2013. Retrieved 16 October 2021.
- ^ "Butler Station moves step closer as track laid". Media Statements. 19 October 2012. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ "Another big step for Butler rail project". Public Transport Authority. 13 November 2012. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ Orr, Aleisha (13 November 2012). "Work starts on taking train line further north". WAtoday. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ a b "Butler extension full steam ahead". Media Statements. 23 October 2013. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ a b "Butler Station construction complete". Public Transport Authority. 16 May 2014. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Trains start using new Butler extension". Public Transport Authority. 1 September 2014. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Butler rail station opens September 21". Public Transport Authority. 18 August 2014. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Barnett opens rail extension as first train leaves Butler station". WAtoday. 21 September 2014. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Butler train station and rail extension opens". ABC News. 21 September 2014. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ "Extended northern railway: Butler train station open today". PerthNow. 21 September 2014. Archived from the original on 5 October 2021. Retrieved 5 October 2021.
- ^ Jarvis, Lucy (23 September 2014). "Residents rattled by rail". PerthNow. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ a b Jarvis, Lucy (23 September 2014). "Government to monitor noise complaints". PerthNow. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Wearne, Phoebe (13 October 2014). "Train vibrations send residents loco". The West Australian. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Jarvis, Lucy (21 October 2014). "Noise report nears". PerthNow. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Wearne, Phoebe; Acott, Kent (13 December 2014). "No housing near station". The West Australian. p. 40.
- ^ "Perth's Butler rail station to open on 21 September". Railway Technology. 18 August 2014. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ "First birthday for Butler train extension". Public Transport Authority. 21 September 2015. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Jarvis, Lucy (29 September 2015). "Use passes expectation: Butler train station". PerthNow. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ Probert, Oliver (21 September 2015). "A year on, Butler extension hailed a success". Rail Express. Archived from the original on 16 October 2021. Retrieved 16 October 2021.
- ^ "Yanchep Rail Extension Project Definition Plan" (PDF). Metronet. June 2018. p. 18. Archived (PDF) from the original on 14 May 2023. Retrieved 14 May 2023.
- ^ "Yanchep Rail Extension – Stations – Butler Station". Metronet. Archived from the original on 20 October 2021. Retrieved 1 December 2021.
- ^ "Yanchep Rail Extension, Perth". Railway Technology. Archived from the original on 5 December 2020. Retrieved 12 October 2021.
- ^ Rintoul, Caitlyn (14 July 2024). "Yanchep rail extension officially opened after significant delays and cost blow outs". The West Australian. Retrieved 14 July 2024.
- ^ "Joint media statement – METRONET Yanchep Rail Extension officially open". Media Statements. 14 July 2024. Retrieved 14 July 2024.
- ^ "Transperth". Public Transport Authority. Archived from the original on 5 October 2021. Retrieved 25 October 2021.
- ^ "Stops Near You (99901)". Transperth. Government of Western Australia. Archived from the original on 15 November 2024. Retrieved 15 November 2024.
- ^ "Butler Station Map" (PDF). Transperth. Government of Western Australia. Archived from the original (PDF) on 15 November 2024. Retrieved 15 November 2024.
- ^ "About Transperth". Transperth. Archived from the original on 8 October 2021. Retrieved 25 October 2021.
- ^ "Transperth Bus Contracting Model – Bus Service Franchising Masterclass" (PDF). Urban Transport Group. p. 9. Archived (PDF) from the original on 26 October 2021. Retrieved 25 October 2021.
- ^ "Route 481". Bus Timetable 77 (PDF). Transperth. 17 June 2024 [effective from 15 July 2024].
- ^ "Route 482". Bus Timetable 77 (PDF). Transperth. 17 June 2024 [effective from 15 July 2024].
- ^ "Route 483". Bus Timetable 77 (PDF). Transperth. 17 June 2024 [effective from 15 July 2024].
- ^ "Route 484". Bus Timetable 77 (PDF). Transperth. 17 June 2024 [effective from 15 July 2024].
- ^ a b Cite error: The named reference
yanchepservicechanges
was invoked but never defined (see the help page). - ^ "Route 486". Bus Timetable 78 (PDF). Transperth. 1 August 2024 [effective from 18 August 2024].
- ^ "Route 487". Bus Timetable 78 (PDF). Transperth. 1 August 2024 [effective from 18 August 2024].
- ^ "Route 488". Bus Timetable 78 (PDF). Transperth. 1 August 2024 [effective from 18 August 2024].
External links
[edit]- Butler Station information page from Transperth
- Butler Extension Project – Fly Through Animation on YouTube
- Butler Extension Project – Butler Station completed on YouTube
- Butler Extension Project – Butler Station opening day on YouTube