Jump to content

Apollo Docking Mechanism

From Wikipedia, the free encyclopedia
Docking Mechanism
Apollo drogue and probe assemblies. The docking ring is part of the Apollo Command Module.
Module statistics
Docked19 times
Diameter32 inches (81 cm)

The docking mechanism of the Apollo was a "probe and drogue" system designed to allow the Apollo Command/Service Module (CSM) to dock with the Apollo Lunar Module. The same system was later used for the Skylab 2, Skylab 3 and Skylab 4 CSMs to dock with the Skylab space station, and the Apollo–Soyuz Test Project CSM to dock with a Docking Module adapter which allowed docking with the Soyuz 19 spacecraft. There were 12 hard latches.[1] [2][3]

The Apollo system differed from the Gemini Docking Mechanism in that after locking, the probe and drogue mechanism could be manually removed to allow access between the two docked craft. Ideas from this system were instrumental in creating later systems, like those used in the Space Shuttle, the International Space Station, and others.[4]

The Apollo docking system was used successfully in thirteen missions in Earth and lunar orbits between 1969 and 1975. The only serious problems were experienced on Apollo 14 and Skylab 2, when the probe systems failed to capture the drogue receptacles during repeated docking attempts. Successful docking was eventually accomplished in both missions.[5]

See also

[edit]

References

[edit]
  1. ^ Ezell 1988, Table 2-37: "Apollo 9 Characteristics".
  2. ^ "NASA, The Rendezvous That Was Almost Missed:Lunar Orbit Rendezvous and the Apollo Program, December 1992". Archived from the original on December 23, 2020. Retrieved December 30, 2019.
  3. ^ NASA, The Apollo Flight Journal, Lunar Orbit Rendezvous, Frank O'Brien
  4. ^ Two Become One: How the Apollo Spacecraft Stuck Together, January 29, 2016
  5. ^ NASA, NASA History, Docking and Transfer
[edit]