Jump to content

Wrought Iron Bridge Company

From Wikipedia, the free encyclopedia
(Redirected from Wrought Iron Bridge Co.)
Wrought Iron Bridge Company
IndustryCivil Engineering
Founded1864
HeadquartersCanton, Ohio
Key people
David Hammond, founder
ProductsBridge building
construction

The Wrought Iron Bridge Company was a bridge fabrication and construction company based in Canton, Ohio, United States. It specialized in the fabrication of iron truss bridges and was a prolific bridge builder in the late 19th century. It was one of the 28 firms consolidated by J. P. Morgan into the American Bridge Company in 1900.[1] Many of its bridges have been listed on the National Register of Historic Places.

Products

[edit]

The Wrought Iron Bridge Company specialized in relatively short-span iron truss bridges. Most were built for highway use, as the railroads were all privately owned at the time and employed their own engineers. The company supplied a catalog of bridge designs and mass-produced the parts to build these designs. Once a bridge was ordered, the pieces were shipped by train to the nearest station. Thus, local contractors were able to assemble a bridge very quickly, much like a model.

1882 pamphlet

[edit]
Illustration of a single intersection Pratt truss

An illustrated pamphlet, dated 1882, is available online. In this pamphlet, Wrought Iron Bridge claims that "during the past 18 years this firm have erected nearly 4,300 spans, varying in length from 20 to 300 feet." At the time of publication, the company had worked in 26 US States, Canada and Mexico.

Wrought Iron Bridge were able to assemble their bridges very quickly and the pamphlet claims that they "have completed 100 to 140 foot spans at points from 100 to 300 miles distant from our works in 8 to 15 days." They were not quite as fast on larger bridges, but the "350 foot bridge, 38 foot wide, built at New Philadelphia, Ohio, was completed for travel in 40 days from the receipt of the contract," a speed unheard of for modern construction, often because of legal red tape.

Surviving bridges

[edit]
  • Aetnaville Bridge, in Wheeling, West Virginia, 1891
  • Rough Holler Bridge, near Hermitage, Missouri, 1891[6]
  • Strimple's Mill Road Bridge over Lockatong Creek, Delaware Township, New Jersey, 1897
  • Masemore Road Bridge, near Baltimore, Maryland, 1898
  • Linville Creek Bridge, in Broadway, Rockingham County, Virginia, 1898<ref>"177-5001 Linville Creek Bridge".</re
  • Walnut River Bridge, near Douglass, Kansas in Butler County, Kansas, built before 1900
  • Rockafellows Mill Bridge, Rockefellows Mills, New Jersey, 1900
  • Springbanks (Renwick Road) Bridge, Plainfield, Illinois, built before 1901
  • Howell Park Golf Course Bridge in Howell, New Jersey 1899
  • Bishop Road Bridge in Upper Allen Township, Cumberland County, Pennsylvania 1898
[edit]

Citations

[edit]
  1. ^ "Survey Report for Historic Bridges: Chapter 3-Bridge Companies" (PDF). Tennessee Department of Transportation. p. esp. 218–219, others. Archived from the original (PDF) on 2008-12-31.
  2. ^ Ann Arbor Courier, 10/12/1883
  3. ^ Burdette, Dwight (June 25, 2010). "English: Historical marker at Delhi wrought iron bridge, Webster Township, Michigan" – via Wikimedia Commons.
  4. ^ O'brien, Claire. "TOWN TRAVELS: The Van Buren Street bridge". Journal Standard.
  5. ^ "Application Failure".
  6. ^ "Rough Holler Bridge regains a missing piece of its history". Springfield News-Leader. Retrieved 2018-10-24.

References

[edit]