User talk:Duplex2411
Welcome
[edit]Welcome to Wikipedia! I hope you enjoy the encyclopedia and want to stay. As a first step, you may wish to read the Introduction.
If you have any questions, feel free to ask me at my talk page – I'm happy to help. Or, you can ask your question at the New contributors' help page.
Here are some more resources to help you as you explore and contribute to the world's largest encyclopedia...
Finding your way around:
Need help?
|
|
How you can help:
|
|
Additional tips...
|
|
The first jet engine to ever run was made by Professor Ernst Heinkel, in March 1937. It was the hydrogen fuelled Heineken He S 2. The engine only ever ran on a test stand, and its construction was overseen by Hans Joachim Pabst von Ohain. (Whittle's engine first ran on 12-4-1937, a couple of weeks later than the Heinkel engine)
The first jet powered aircraft to fly was the Heinkel He 178, on 27-8-1939, powered by a Heinkel He S 3B engine, which made about 450kg (1,000lbs) of thrust. The flight lasted six minutes, and the pilot was Erich Warsitz.
The first twin engined jet to fly was the Heinkel He 280, on 30-3-1941, powered by two Heinkel He S 8's, and lasted only three minutes due to concerns of the chance of the engines overheating.
The first four engined jet to fly was the Arado AR 234C, in April 1944. It was powered by four BMW 003 jet engines.
The first six engined jet aircraft to fly was the Junkers Ju 287 derivative, the Junkers EF 131. The aircraft was built in Dessau, Germany, and finished in late 1946. The factory had been taken over by occupying Soviet troops, and for some reason for its first flight it was disassembled and taken by train to Podbererez'ye, near Moscow. The date is not definite, but it was around late 1946. Each forward swept wing had a large pod, each containing three Jumo 004C engines.
The Heinkel factory was the first to use catapults to assist aircraft in taking off from ships.
The Heinkel factory invented the explosive and counter-sunk riveting methods.
The first ejection seat was made by Heinkel, for the He 280. It was pneumatically powered, and accelerated the pilot upwards at between 7 and 9 gees.
The first use of an ejection seat was made by pilot Schenk, on 13-1-1943. He required it's use when the He 280, which was powered by two Argus pulse-jets that required a high forward speed to start up, refused to separate from the tow aircraft due to the cable release mechanism icing up. As a precaution, Schenk ejected and landed safely.
The first aircraft to have variable sweep wings was the Messerschmitt Me P1101, though it never flew due to he end of the Second War War bring its construction to a halt. The wings, however, could not be moved in flight, only on the ground. Its design was later copied and improved on by Bell in the US, when they made the Bell X-5 experimental aircraft, which flew six years later on 20-6-1951.
The axial flow compressor, later used by the vast majority of all jet engines, was invented by Frenchman, Maxime Guillaume in 1921.
The ramjet engine was invented by Frenchman, René Lorin, in 1908. It's use was not realised for many decades.
The first afterburning jet engine was a modified Jumo 004E. It ran in mid 1945, and made 1000kg (2200lbs) thrust 'dry', and 1200kg (2650lbs) when afterburning.
The first by-pass jet engine (like the engines on modern large jet airliners) was to be the Heinkel He S 10 'dual cycle engine', in late 1939, but its development was halted in favour of the He S 011. When the war ended, Germany was clearly ahead of Britain in jet propulsion technology . Whittle didn't invent the jet engine ......