User:Railroader96/draft

Teplovoz TE10 (Тепловоз ТЭ10)
Model of class TE10
Type and origin Power type Diesel-electric Builder Luhanskteplovoz Malyshev Factory Build date 2ТЭ10 (ТЭ12) 1960—1963 2ТЭ10Л 1961—1977 2ТЭ10В 1975—1981 2ТЭ10М 1981—1990 2ТЭ10МК 1981 2ТЭ10Г 1988 2ТЭ10С 1988 2ТЭ10У 1989—1996 2ТЭ10УТ 1989—1995 2ТЭ10УП 1991 Total produced 2ТЭ10 (ТЭ12) 19 2ТЭ10Л 3192 2ТЭ10В 1898 2ТЭ10М 2444 2ТЭ10МК 1981 20 2ТЭ10Г 2 2ТЭ10С 3 2ТЭ10У 549—555 2ТЭ10УТ 99 2ТЭ10УП 1-2
Specifications Configuration: ​  • AAR C-C  • UIC Co-Co Gauge 1520 mm Fuel type Diesel Fuel capacity TE10-001 -> 5500 kg
Performance figures Maximum speed 2ТЭ10Л, 2ТЭ10М 100km/h 2ТЭ10У 120 km/h Power output 1830 kW - 2040kW based on modifications
Career Nicknames Chervontsi, Nautilus, Tens Locale USSR Russia Ukraine Belarus Latvia

Teplovoz TE10 (in Russian Тепловоз ТЭ10) is a Russian diesel-electric locomotive.

Name

The name of this locomotive (ТЭ10) is from тепловоз с электрической передачей, тип 10 meaning diesel-electric locomotive type 10.

History

In 1957-1958. Kharkiv plant "Electrotyazhmash" and Malyshev Factory designed a new single-section locomotive with 50% more power than sections of the Teplovoz TE3, and only a slightly greater mass. Creation of such a locomotive was the result of numerous theoretical and experimental research and the introduction of new design solutions. The greatest difficulties arose in the process of developing a new twelve-9D100 diesel with increased efficiency on the basis of diesel 2D100, and the creation of the locomotive chassis with low weight and improved braking and dynamic characteristics. The other goal was to develop an improved design scheme of power and reliable in operation of electric machines for the new locomotive.

The first locomotive of the new design, designated TE10-001 (Kharkiv), was released in November 1958.

One of the innovations in the Soviet locomotive factories became the principle of whole body supporting structure which was used until this point only Czechoslovak CHS1 electric locomotives and electric trains Riga ER1. The body of the locomotive was based on two three-axle trucks, aligned with the cart locomotives TE3.

Diesel 9D100 had a capacity of 3000 hp and the mass together with a frame 22350 kg.

At the locomotive were the installation of six new traction motors EDT-340А designed and manufactured plant "Electrotyazhmash for gas-turbine electric locomotive G1-01. Rated engine power at work in the locomotive - 307 kW, weight - 2800 kg. TED had axle support suspension, gear ratio gearbox - 68:15.

For the first time in domestic locomotive building was used a principally new system of automatic control of the traction generator that provides a specified voltage dependence of the generator from its current, allowing a fuller use of the power of diesel, which was not possible previously.

Office of diesel with the aid of the controller driver KM-1501, the main lever of which had zero and 15 working positions.

With much less weight than the two-section locomotive TE3, TE10 diesel locomotive could successfully replace the locomotives that worked a single thrust.

From 1958 to 1961, Kharkov plant produced 26 locomotives of this series. In the process of production some changes were made in the design aimed at improving the work and reduced weight of the locomotive. In particular, in addition to traction applied 340А EDT-EDT-340g and ED-104 (the latter - with a simultaneous change of gear at 69:14). After these and several other relatively large changes in the service weight of the locomotive was 129 tons with an increase in fuel (up to 6500 kg) and sand (up to 950 kg).

Diesel locomotives of this series at first worked at the Kuibyshev Railway, and then in the North Caucasus. On 1 January 1976 all the locomotives in this series except one were on the South road, working mainly on maneuvers. Exclusion of locomotives TE10 from inventory mainly occurred in the 1980s. In 1990 a total of three locomotives TE10 were written off.