User:Prunk/Utilite
Appearance
Specifications
[edit]Utilite Value | Utilite Standard | Utilite Pro | Utilite2 4GB | Utilite2 SSD | Extra zbriši | |
---|---|---|---|---|---|---|
Target price: | US$ 99 | US$ 159 | US$ 219 | US$ 192 | US$ 229 | |
SoC: | Broadcom BCM2835 (CPU, GPU, DSP, SDRAM, and single USB port)[1][2] | Broadcom BCM2836 (CPU, GPU, DSP, SDRAM, and single USB port) | Broadcom BCM2835 (CPU, GPU, DSP, SDRAM, and single USB port)[1][2] | |||
CPU: | 1 GHz Freescale i.MX6 single-core ARM Cortex-A9 | 1 Ghz Freescale i.MX6 dual-core ARM Cortex-A9 | 1.2 Ghz Freescale i.MX6 quad-core ARM Cortex-A9 | 1.7 Ghz Qualcomm Snapdragon 600 (APQ8064) quad-core | ||
GPU: | Broadcom VideoCore IV @ 250 MHz[3][4] OpenGL ES 2.0 (24 GFLOPS) MPEG-2 and VC-1 (with license),[5] 1080p30 h.264/MPEG-4 AVC high-profile decoder and encoder[1] | |||||
Memory (DDR3-1066): | 512 MB | 2 GB | ||||
USB 2.0 ports:[6] | 1 (direct from BCM2835 chip) | 2 (via the on-board 3-port USB hub)[7] | 4 (via the on-board 5-port USB hub)[8][9] | 1 (direct from BCM2835 chip) | ||
Video input: | 15-pin MIPI camera interface (CSI) connector, used with the Raspberry Pi camera or Raspberry Pi NoIR camera[10] | 2× MIPI camera interface (CSI)[2][11][12] | ||||
Video outputs: | HDMI (rev 1.3 & 1.4),[13] 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards,[14] composite video (PAL and NTSC) via RCA jack | HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via 3.5 mm TRRS jack shared with audio out | HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via RCA jack | HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via 3.5 mm TRRS jack shared with audio out | HDMI, 2× MIPI display interface (DSI),[2][12] MIPI display interface (DSI) for raw LCD panels,[15][16] composite video[11][17] | |
Audio inputs: | As of revision 2 boards, I²S[18] | |||||
Audio outputs: | Analog via 3.5 mm phone jack; digital via HDMI and, as of revision 2 boards, I²S | Analog, HDMI, I²S | ||||
Onboard storage:[6] | SD / MMC / SDIO card slot (3.3 V with card power only) | MicroSD[8] | SD / MMC / SDIO card slot | MicroSD | 4-GB eMMC flash memory chip;[2] may or may not support external SD cards with configuration changes | |
Onboard network:[6] | None | 10/100 Mbit/s Ethernet (8P8C) USB adapter on the third/fifth port of the USB hub (SMSC lan9514-jzx)[7] | None | |||
Low-level peripherals: | 8× GPIO,[19] plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio[20] +3.3 V, +5 V, ground[3][21] |
17× GPIO plus the same specific functions, and HAT ID bus | 8× GPIO, plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio +3.3 V, +5 V, ground.
An additional 4× GPIO are available on the P5 pad if the user is willing to make solder connections |
17× GPIO plus the same specific functions, and HAT ID bus | 46× GPIO, some of which can be used for specific functions including I²C, SPI, UART, PCM, PWM[22] | |
Power ratings: | 300 mA (1.5 W)[23] | 200 mA (1 W)[24] | 700 mA (3.5 W) | 600 mA (3.0 W)[8] | similar to Model A+ | |
Power source: | 5 V via MicroUSB or GPIO header | 5 V | ||||
Size: | 85.60 mm × 56.5 mm (3.370 in × 2.224 in) – not including protruding connectors | 65 mm × 56.5 mm (2.56 in × 2.22 in) – (same as HAT board) and 10 mm high | 85.60 mm × 56.5 mm (3.370 in × 2.224 in) – not including protruding connectors | 67.6 mm × 30 mm (2.66 in × 1.18 in) | ||
Weight: | 45 g (1.6 oz) | 23 g (0.81 oz) | 45 g (1.6 oz) | 7 g (0.25 oz)[25] |
- ^ a b c "BCM2835 Media Processor; Broadcom". Broadcom.com. 1 September 2011. Retrieved 6 May 2012.
- ^ a b c d e Cite error: The named reference
CM-Announcement
was invoked but never defined (see the help page). - ^ a b "Q&A with our hardware team". Raspberry Pi Foundation. Retrieved 20 September 2011.
- ^ Halfacree, Gareth. "Raspberry Pi - The Model B". bit-tech.net. Dennis Publishing Limited. Retrieved 10 June 2013.
- ^ Cite error: The named reference
rpi-codec
was invoked but never defined (see the help page). - ^ a b c "Verified USB Peripherals and SDHC Cards;". Elinux.org. Retrieved 6 May 2012.
- ^ a b "SMSC LAN9512 Website;". Smsc.com. Retrieved 6 May 2012.
- ^ a b c Cite error: The named reference
B-Plus-Announcement
was invoked but never defined (see the help page). - ^ "Microchip/SMSC LAN9514 data sheet;" (PDF). Microchip. Retrieved 15 July 2014.
- ^ "diagram of Raspberry Pi with CSI camera connector". Elinux.org. 2 March 2012. Retrieved 22 June 2012.
- ^ a b Adams, James (3 April 2014). "Raspberry Pi Compute Module electrical schematic diagram" (PDF). Raspberry Pi Foundation. Retrieved 22 September 2014.
- ^ a b Adams, James (3 April 2014). "Raspberry Pi Compute Module IO Board elecrical schematic diagram" (PDF). Raspberry Pi Foundation. Retrieved 22 September 2014.
- ^ "Embedded Linux Wiki: Hardware Basic Setup". Elinux.org. Retrieved 25 May 2013.
- ^ "Raspberry Pi, supported video resolutions". eLinux.org. 30 November 2012. Retrieved 11 December 2012.
- ^ "Raspberry Pi Wiki, section screens". Elinux.org. Retrieved 6 May 2012.
- ^ "diagram of Raspberry Pi with DSI LCD connector". Elinux.org. Retrieved 6 May 2012.
- ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
- ^ "I2S driver development thread". Retrieved 16 September 2014.
- ^ More GPIOs can be used if you do not use the low level peripherals
- ^ Since the release of the revision 2 model
- ^ "Raspberry Pi GPIO Connector;". Elinux.org. Retrieved 6 May 2012.
- ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
- ^ "Power supply confirmed as 5V micro USB". Raspberrypi.org. Retrieved 25 July 2012.
- ^ http://www.raspi.today/raspberry-pi-model-a-plus-out-now/
- ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.