User:Hideyo.h/sandbox

Screenshot of Pong implemented in CHIP-8

Telmac 1800 running CHIP-8 game Space Intercept (Joseph Weisbecker, 1978)

CHIP-8 is an interpreted programming language, developed by Joseph Weisbecker. It was initially used on the COSMAC VIP and Telmac 1800 8-bit microcomputers in the mid-1970s. CHIP-8 programs are run on a CHIP-8 virtual machine. It was made to allow video games to be more easily programmed for said computers.

Roughly twenty years after CHIP-8 was introduced, derived interpreters appeared for some models of graphing calculators (from the late 1980s onward, these handheld devices in many ways have more computing power than most mid-1970s microcomputers for hobbyists).

An active community of users and developers existed in the late 1970s, beginning with ARESCO's "VIPer" newsletter whose first three issues revealed the machine code behind the CHIP-8 interpreter.

CHIP-8 applications

There are a number of classic video games ported to CHIP-8, such as Pong, Space Invaders, Tetris, and Pac-Man. There's also a random maze generator available. These programs are reportedly placed in the public domain, and can be easily found on the Internet.

CHIP-8 today

There is a CHIP-8 implementation for almost every platform, as well as some development tools. Despite this, there are only a small number of games for the CHIP-8.

CHIP-8 has a descendant called SCHIP (Super Chip), introduced by Erik Bryntse. In 1990, a CHIP-8 interpreter called CHIP-48 was made for HP-48 graphing calculators so that games could be programmed more easily. Its extensions to CHIP-8 are what became known as SCHIP. It features a larger resolution and several additional opcodes which make programming easier. If it were not for the development of the CHIP-48 interpreter, CHIP-8 would not be as well known today.

The next most influential developments (which popularized S/CHIP-8 on many other platforms) were David Winter's emulator, disassembler, and extended technical documentation. It laid out a complete list of undocumented opcodes and features, and was distributed across many hobbyist forums. Many emulators had these works as a starting point.

While CHIP-8 and SCHIP have commonly been implemented as emulators, a pure hardware implementation (written in the Verilog language) also exists for certain FPGA boards.

Virtual machine description

Memory

CHIP-8 was most commonly implemented on 4K systems, such as the Cosmac VIP and the Telmac 1800. These machines had 4096 (0x1000) memory locations, all of which are 8 bits (a byte) which is where the term CHIP-8 originated. However, the CHIP-8 interpreter itself occupies the first 512 bytes of the memory space on these machines. For this reason, most programs written for the original system begin at memory location 512 (0x200) and do not access any of the memory below the location 512 (0x200). The uppermost 256 bytes (0xF00-0xFFF) are reserved for display refresh, and the 96 bytes below that (0xEA0-0xEFF) were reserved for call stack, internal use, and other variables.

In modern CHIP-8 implementations, where the interpreter is running natively outside the 4K memory space, there is no need for any of the lower 512 bytes memory space to be used, but it is common to store font data in those lower 512 bytes (0x000-0x200).

Registers

CHIP-8 has 16 8-bit data registers named from V0 to VF. The VF register doubles as a carry flag.

The address register, which is named I, is 16 bits wide and is used with several opcodes that involve memory operations.

The stack

The stack is only used to store return addresses when subroutines are called. The original 1802 version allocated 48 bytes for up to 12 levels of nesting; modern implementations normally have at least 16 levels.

Timers

CHIP-8 has two timers. They both count down at 60 hertz, until they reach 0.

• Delay timer: This timer is intended to be used for timing the events of games. Its value can be set and read.
• Sound timer: This timer is used for sound effects. When its value is nonzero, a beeping sound is made.

Input

Input is done with a hex keyboard that has 16 keys which range from 0 to F. The '8', '4', '6', and '2' keys are typically used for directional input. Three opcodes are used to detect input. One skips an instruction if a specific key is pressed, while another does the same if a specific key is not pressed. The third waits for a key press, and then stores it in one of the data registers.

Graphics and sound

Original CHIP-8 Display resolution is 64×32 pixels, and color is monochrome. Graphics are drawn to the screen solely by drawing sprites, which are 8 pixels wide and may be from 1 to 15 pixels in height. Sprite pixels that are set flip the color of the corresponding screen pixel, while unset sprite pixels do nothing. The carry flag (VF) is set to 1 if any screen pixels are flipped from set to unset when a sprite is drawn and set to 0 otherwise. This is used for collision detection.

As previously described, a beeping sound is played when the value of the sound timer is nonzero.

Opcode table

CHIP-8 has 35 opcodes, which are all two bytes long and stored big-endian. The opcodes are listed below, in hexadecimal and with the following symbols:

• NNN: address
• NN: 8-bit constant
• N: 4-bit constant
• X and Y: 4-bit register identifier

Opcode	Explanation
0NNN	Calls RCA 1802 program at address NNN. Not necessary for most ROMs.
00E0	Clears the screen.
00EE	Returns from a subroutine.
1NNN	Jumps to address NNN.
2NNN	Calls subroutine at NNN.
3XNN	Skips the next instruction if VX equals NN.
4XNN	Skips the next instruction if VX doesn't equal NN.
5XY0	Skips the next instruction if VX equals VY.
6XNN	Sets VX to NN.
7XNN	Adds NN to VX.
8XY0	Sets VX to the value of VY.
8XY1	Sets VX to VX or VY.
8XY2	Sets VX to VX and VY.
8XY3	Sets VX to VX xor VY.
8XY4	Adds VY to VX. VF is set to 1 when there's a carry, and to 0 when there isn't.
8XY5	VY is subtracted from VX. VF is set to 0 when there's a borrow, and 1 when there isn't.
8XY6	Shifts VX right by one. VF is set to the value of the least significant bit of VX before the shift.
8XY7	Sets VX to VY minus VX. VF is set to 0 when there's a borrow, and 1 when there isn't.
8XYE	Shifts VX left by one. VF is set to the value of the most significant bit of VX before the shift.
9XY0	Skips the next instruction if VX doesn't equal VY.
ANNN	Sets I to the address NNN.
BNNN	Jumps to the address NNN plus V0.
CXNN	Sets VX to the result of a bitwise and operation on a random number and NN.
DXYN	Draws a sprite at coordinate (VX, VY) that has a width of 8 pixels and a height of N pixels. Each row of 8 pixels is read as bit-coded starting from memory location I; I value doesn’t change after the execution of this instruction. As described above, VF is set to 1 if any screen pixels are flipped from set to unset when the sprite is drawn, and to 0 if that doesn’t happen
EX9E	Skips the next instruction if the key stored in VX is pressed.
EXA1	Skips the next instruction if the key stored in VX isn't pressed.
FX07	Sets VX to the value of the delay timer.
FX0A	A key press is awaited, and then stored in VX.
FX15	Sets the delay timer to VX.
FX18	Sets the sound timer to VX.
FX1E	Adds VX to I.
FX29	Sets I to the location of the sprite for the character in VX. Characters 0-F (in hexadecimal) are represented by a 4x5 font.
FX33	Stores the binary-coded decimal representation of VX, with the most significant of three digits at the address in I, the middle digit at I plus 1, and the least significant digit at I plus 2. (In other words, take the decimal representation of VX, place the hundreds digit in memory at location in I, the tens digit at location I+1, and the ones digit at location I+2.)
FX55	Stores V0 to VX (including VX) in memory starting at address I.
FX65	Fills V0 to VX (including VX) with values from memory starting at address I.

Additional Resources

• "RCA COSMAC VIP CDP18S711 Instruction Manual," RCA Solid State Division, Somerville, NJ 08776, February 1978. Part VIP-311. pp. 13–18, 35-37.
• BYTE magazine, December 1978, pp. 108–122. "An Easy Programming System," by Joseph Weisbecker. Describes CHIP-8 with specific example of a rocketship and UFO shooting-gallery game.
• Archive of Chip8.com Website dedicated to CHIP-8 and related systems. Maintains the most complete collection of CHIP-8 programs on the net.
• David Winter's CHIP-8 Emulator, utilities and games.
• Let's Emu : CHIP-8 Emulator – A list of CHIP-8 and SCHIP emulators.
• BytePusher A minimalist virtual machine inspired by the CHIP-8.
• RCA COSMAC group on Yahoo, with authorized scans of the VIPER magazine.
• OChip8 A CHIP-8 emulator in a browser
• Dream 6800 The popular Dream 6800 Microcomputer featured in Electronics Australia in 1979 ran CHIP-8.
• FPGA SuperChip A Verilog implementation of the SCHIP specification.
• Octo is an Online CHIP-8 IDE, Development System, Compiler/Assembler and Emulator, with a proprietary scripting language
• Cowgod's Chip-8 Technical Reference

Category:Virtual machines Category:Virtualization software *GZ CHIP-8