User:Awazed

Md. Abdul Wazed is worldwide well-known for the concept of commonality in manufacturing. He has introduced the commonality (both part and process) in the MRP models. The Models are applicable for manufacturing under various uncertain factors. The models can be used to develop soft tools for SME/SMIs.

'About Md. Abdul Wazed'

Md. Abdul Wazed is an Associate Professor in the Department of Mechanical Engineering, Chittagong University of Engineering and Tchnology (CUET). He got his PhD in Supply Chain Management from the Department of Engineering Design & Manufacture, University of Malaya (UM), Malaysia. He acquired his Master in Engineering (Industrial Management) degree from Katholic University of Leuven (KULeuven), Belgium in 1999. He graduated with Mechanical Engineering degree from CUET [erstwhile Bangladesh Institute of Technology (BIT), Chittagong], Bangladesh. He has been working as a faculty in the Department of Mechanical Engineering of CUET, Bangladesh since his graduation.

Publications

Md. Saidur Rahman, Md. Shakar Ullah Chowdhury, Md. Abdul Wazed, Md. Mamunur Roshid, 2012, 'A Hardware & Software System for Unmanned Ground Vehicle Control with Robotic Arm & Color Detection', Advanced Materials Research, vol. 605-607 DOI: 10.4028/www.scientific.net/amr.605-607.1577

Wazed, M.A. and Ahmed, S., (2009). "A feasibility study of micor-hydroelectric power generation at Sapchari waterfall, Khagrachari, Bangladesh", Journal of Applied Sciences, vol. 9, no. 2, pp. 372-376 DOI: 10.3923/jas.2009.372.376 http://www.scopus.com/inward/record.url?eid=2-s2.0-63049133715&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2010). "A review of manufacturing resources planning models under different uncertainties: State-of-the-art and future directions", South African Journal of Industrial Engineering, vol. 21, no. 1, pp. 17-33

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2010). "Analysis of the impacts of common components in multistage production system under uncertain conditions: Application of Taguchi method", Scientific Research and Essays, vol. 5, no. 24, pp. 3814-3825

Md. Abdul Wazed, Shamsuddin Ahmed, Yusoff Nukman, 2011, 'Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions', European J. of Industrial Engineering, vol. 5, no. 2, p. 215 http://www.scopus.com/inward/record.url?eid=2-s2.0-79955439874&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2011). "Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions", European Journal of Industrial Engineering, vol. 5, no. 2, pp. 215-231

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2011). "Application of Taguchi method to analyze the impacts of commonality in multistage production under uncertainty", Advanced Science Letters, vol. 4, no. 2, pp. 415-423

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2010). "Application of taguchi method to analyze the impacts of commonalities in multistage production under bottleneck and uncertainty", International Journal of Physical Sciences, vol. 5, no. 10, pp. 1576-1591

Wazed, M.A. and Ahmed, S. and Yusoff, N., (2009). "Commonality and its measurement in manufacturing resources planning", Journal of Applied Sciences, vol. 9, no. 1, pp. 69-78 DOI: 10.3923/jas.2009.69.78 http://www.scopus.com/inward/record.url?eid=2-s2.0-63049087926&partnerID=MN8TOARS

Wazed, Md.A. and Ahmed, S. and Nukman, Y., (2010). "Commonality in manufacturing resources planning-issues and models: A review", European Journal of Industrial Engineering, vol. 4, no. 2, pp. 167-188 DOI: 10.1504/EJIE.2010.031076 http://www.scopus.com/inward/record.url?eid=2-s2.0-77249174925&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Yusoff, N., (2008). "Commonality models in manufacturing resources planning: State-of-the-art and future directions", European Journal of Scientific Research, vol. 23, no. 3, pp. 421-435 http://www.scopus.com/inward/record.url?eid=2-s2.0-65449179995&partnerID=MN8TOARS

Jahirul, M.I. and Masjuki, H.H. and Saidur, R. and Kalam, M.A. and Jayed, M.H. and Wazed, M.A., (2010). "Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine", Applied Thermal Engineering, vol. 30, no. 14-15, pp. 2219-2226 DOI: 10.1016/j.applthermaleng.2010.05.037 http://www.scopus.com/inward/record.url?eid=2-s2.0-77954852332&partnerID=MN8TOARS

Wazed, M.A. and Nukman, Y. and Islam, M.T., (2010). "Design and fabrication of a cost effective solar air heater for Bangladesh", Applied Energy, vol. 87, no. 10, pp. 3030-3036 DOI: 10.1016/j.apenergy.2010.02.014 http://www.scopus.com/inward/record.url?eid=2-s2.0-77954032918&partnerID=MN8TOARS

Md. Abdul Wazed, J. U. Ahamed, S. Ahmed, M. A. Rashid Sarkar, 2011, 'ENHANCEMENT OF HEAT TRANSFER IN TURBULENT FLOW THROUGH A TUBE WITH A PERFORATED TWISTED TAPE INSERT', Journal of Enhanced Heat Transfer, vol. 18, no. 1, pp. 1-13 DOI: 10.1615/JEnhHeatTransf.v18.i1.10

Wazed, M.A. and Ahmed, S. and Yusoff, N., (2010). "Effects of component commonalities and various uncertain factors on production system", Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies, MIMT 2010, pp. 47-55 http://www.scopus.com/inward/record.url?eid=2-s2.0-77953378896&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Yusoff, N., (2009). "Effects of process commonalities in production system under various uncertain factors", International Conference for Technical Postgraduates 2009, TECHPOS 2009 DOI: 10.1109/TECHPOS.2009.5412118 http://www.scopus.com/inward/record.url?eid=2-s2.0-77950994259&partnerID=MN8TOARS

Ahamed, J.U. and Wazed, M.A. and Ahmed, S. and Nukman, Y. and Ya, T.M.Y.S.T. and Sarkar, M.A.R., (2011). "Enhancement and prediction of heat transfer rate in turbulent flow through tube with perforated twisted tape inserts: A new correlation", Journal of Heat Transfer, vol. 133, no. 4 DOI: 10.1115/1.4002635 http://www.scopus.com/inward/record.url?eid=2-s2.0-78751676327&partnerID=MN8TOARS

Wazed, M.A. and Ahamed, J.U. and Ahmed, S. and Sarkar, M.A.R., (2011). "Enhancement of heat transfer in turbulent flowthrough a tube with a perforated twisted tape insert", Journal of Enhanced Heat Transfer, vol. 18, no. 1, pp. 1-13 DOI: 10.1615/JEnhHeatTransf.v18.i1.10 http://www.scopus.com/inward/record.url?eid=2-s2.0-79955683494&partnerID=MN8TOARS

Md. Abdul Wazed, Shamsuddin Ahmed, 2011, 'Extraction of fuel from municipality solid wastes using an updraft gasifier', International Journal of Renewable Energy Technology, vol. 2, no. 2, p. 105 DOI: 10.1504/IJRET.2011.039288

Wazed, M.A. and Ahmed, S. and Yusoff, N., (2009). "Impacts of common components on production system in an uncertain environment", Scientific Research and Essays, vol. 4, no. 12, pp. 1505-1517 http://www.scopus.com/inward/record.url?eid=2-s2.0-72849117850&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2010). "Impacts of quality and processing time uncertainties in multistage production system", International Journal of Physical Sciences, vol. 5, no. 6, pp. 814-825 http://www.scopus.com/inward/record.url?eid=2-s2.0-77954879547&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Nukman, Y., (2011). "Mathematical models for component commonality under quality and resources breakdown in multistage production", International Journal of Physical Sciences, vol. 6, no. 22, pp. 5202-5222 http://www.scopus.com/inward/record.url?eid=2-s2.0-80054860746&partnerID=MN8TOARS

Mohammed Abdul Wazed, Shamsuddin Ahmed, Yusoff Bin Nukman, 2011, 'Mathematical models for process commonality under quality and resources breakdown in multistage production', Journal of Zhejiang University SCIENCE A, vol. 12, no. 11, pp. 837-848 DOI: 10.1631/jzus.A1000477

Wazed, M.A. and Ahmed, S. and Nukman, Y.B., (2011). "Mathematical models for process commonality under quality and resources breakdown in multistage production", Journal of Zhejiang University: Science A, vol. 12, no. 11, pp. 837-848 DOI: 10.1631/jzus.A1000477 http://www.scopus.com/inward/record.url?eid=2-s2.0-81855224565&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Nukman, Y. and Ale Ebrahim, N., (2012). "Models for component commonality in multistage production", Applied Mechanics and Materials, vol. 110-116, pp. 258-266 DOI: 10.4028/www.scientific.net/AMM.110-116.258 http://www.scopus.com/inward/record.url?eid=2-s2.0-81255162499&partnerID=MN8TOARS

Md. Abdul Wazed, Shamsuddin Ahmed, Yusoff Nukman, 2009, 'Multistage Production Models Under Common Processes in an Uncertain Environment', SSRN Electronic Journal DOI: 10.2139/ssrn.1527332

Wazed, M.A. and Ahmed, S., (2009). "Project management maturity model (PMMM) in developing on-line statistical process control software: An integrated approach", Journal of Applied Sciences Research, vol. 5, no. 11, pp. 1904-1914 http://www.scopus.com/inward/record.url?eid=2-s2.0-77949563897&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S., (2009). "Theory driven real time empirical investigation on joint implementation of PDCA and 5S for performance improvement in plastic moulding industry", Australian Journal of Basic and Applied Sciences, vol. 3, no. 4, pp. 3825-3835 http://www.scopus.com/inward/record.url?eid=2-s2.0-77953483889&partnerID=MN8TOARS

Wazed, M.A. and Ahmed, S. and Yusoff, N., (2009). "Uncertainty factors in real manufacturing environment", Australian Journal of Basic and Applied Sciences, vol. 3, no. 2, pp. 342-351 http://www.scopus.com/inward/record.url?eid=2-s2.0-65549147686&partnerID=MN8TOARS

Nader Ale Ebrahim, Shamsuddin Ahmed, Salwa Hanim Abdul Rashid, M A Wazed, Zahari Taha, 2012, 'Virtual Collaborative R&D Teams in Malaysia Manufacturing SMEs', Advanced Materials Research, vol. 433-440 DOI: 10.4028/www.scientific.net/AMR.433-440.1653 http://www.scopus.com/inward/record.url?eid=2-s2.0-84856033697&partnerID=MN8TOARS