User:Ansbaradigeidfran/Sandbox1

Lego Mindstorms NXT 2.0
Other names	Mindstorms NXT; Mindstorms NXT 2.0
Parent theme	Technic
Availability	2009–2013
	Official website

Lego Mindstorms NXT is a programmable robotics kit released by Lego in late July 2006.^[1] It replaced the first-generation Lego Mindstorms kit, which was called the Robotics Invention System. The base kit ships in two versions: the Retail Version (set #8527)^[2] and the Education Base Set (set #9797).^[3] It comes with the NXT-G programming software, or optionally LabVIEW for Lego Mindstorms.^[4] A variety of unofficial languages exist, such as NXC, NBC, leJOS NXJ, and RobotC. The second generation of the set, the Lego Mindstorms NXT 2.0, was released on August 1, 2009, featuring a color sensor and other upgraded capabilities. The third generation, the EV3, was released in September 2013.

NXT Intelligent Brick

The main component in the kit is a brick-shaped computer called the NXT Intelligent Brick. It can take input from up to four sensors and control up to three motors, via a modified version of RJ12 cables, very much similar to but incompatible with RJ11 phone cords. The plastic pin to hold the cable in the socket is moved slightly to the right. The brick has a 100×64 pixel monochrome LCD and four buttons that can be used to navigate a user interface using hierarchical menus. It has a 32-bit ARM7TDMI-core Atmel AT91SAM7S256 microcontroller with 256 KB of FLASH memory and 64 KB of RAM, plus an 8-bit Atmel AVR ATmega48 microcontroller, and bluetooth support. It also has a speaker and can play sound files at sampling rates up to 8 kHz. Power is supplied by 6 AA (1.5 V each) batteries in the consumer version of the kit and by a Li-Ion rechargeable battery and charger in the educational version.

The Intelligent Brick remains unchanged with NXT 2.0. A black version of the brick was made to celebrate the 10th anniversary of the Mindstorms System with no change to the internals.

Development kits

Lego has released the firmware for the NXT Intelligent Brick as open source, along with schematics for all hardware components.^[5]

Several developer kits are available that contain documentation for the NXT:

Software Developer Kit (SDK), includes information on host USB drivers, executable file format, and bytecode reference
Hardware Developer Kit (HDK), includes documentation and schematics for the NXT brick and sensors
Bluetooth Developer Kit (BDK), documents the protocols used for Bluetooth communications

Programming

Very simple programs can be created using the menu on the NXT Intelligent Brick. More complicated programs and sound files can be downloaded using a USB port or wirelessly using Bluetooth. Files can also be copied between two NXT bricks wirelessly, and some mobile phones can be used as a remote control. Up to three NXT bricks can communicate simultaneously via Bluetooth when user created programs are run.

The retail version of the kit includes software for writing programs that run on Windows and Mac OS personal computers. The software is based on National Instruments LabVIEW and provides a visual programming language for writing simple programs and downloading them to the NXT Brick. This means that rather than requiring users to write lines of code, they instead can use flowchart like "blocks" to design their program.

NXT-G

NXT-G v2.0 is a graphical programming environment that comes bundled with the NXT. With careful construction of blocks and wires to encapsulate complexity, NXT-G can be used for real-world programming. Parallel "sequence beams" are actually parallel threads, so this software is quite good for running a handful of parallel sense/respond loops (example: wait 60 seconds, play a "bonk" sound at low volume if battery is low, loop), or blending autonomous control with bluetooth or other "remote control". The language supports virtual instruments for all Lego branded and most 3rd party sensors/components. Version 2.0 contains new tutorial challenges, a remote control, custom graphics and sound designers, and new Lego color sensor support. Community support is significant, for example: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=191310

Alternative Programming Environments
Name	Language	Replaces Lego Firmware	Platform	Availability	Description	Link
Microsoft Robotics Developer Studio	C#	No(?)	Windows	Discontinued	Free tool which supported programming the NXT and remote control with an Xbox 360 controller.^[6] The software was discontinued in 2014.^[7]	[1]
Bricx Command Center	NXC (Not eXactly C), NBC (Next Byte Codes)	No	Windows, Linux (development branch^[8])	Open Source	BricxCC is the integrated development environment (IDE) used to write, compile, and edit assembly-style NBC and C-style NXC programs for the NXT. It includes additional utilities for transferring files, capturing images and video from the NXT's LCD, and other specialised tasks. Also supports NQC programs for the previous RCXversion of Mindstorms.	[2]
Robolab 2.9	Visual block-based	No	Windows, OS X	Standalone, or free extension for proprietary software	Software based on LabVIEW, originally designed for the older RCX programmable brick. Verison 2.9 added support for the NXT as an aid for existing users to transition to the new hardware. A related version "RoboLab for LabVIEW" is freely available for modern versions of LabVIEW.	[3] [4]
RoboMind	ROBO (text-based)	No	Windows, OS X, Linux	Open Source	A simple educational programming language, intended as a first introduction to automation and programming. It has a built-in simulation environment for developing and testing scripts. Scripts can be transferred to an NXT robot to see the result in real life.^[9]	[5]
Enchanting	Enchanting	No?	Windows, OS X, Linux (experimental)	Open Source	An educational programming language based on Scratch developed by Southern Alberta Robotics Enthusiasts group	[6]
ROBOTC	ROBOTC	Yes	Windows	Proprietary	A free programming language that supports a number of educational robotics systems. Is uses a very optimized firmware, which allows it to run programs very quickly, and also compresses the files so that a large number of programs can fit into the NXT.	[7]

NXTGCC

NXTGCC is a GCC toolchain for programming the NXT firmware in C.

leJOS NXT

leJOS NXJ is a high level open source language based on Java that uses custom firmware developed by the leJOS team.^[10]

nxtOSEK

To be able to write in C/C++, nxtOSEK can be used, but that requires custom firmware too.^[11]

ICON

To write files on the NXT itself, ICON by Steve Hassenplug is an ideal resource.

MATLAB and Simulink

MATLAB is a high-level programming language for numerical computing, data acquisition, and analysis. It can be used to control Lego NXT robots over a Bluetooth serial port (serial port communication is part of the base functionality of MATLAB) or via a USB connection; for example using the RWTH – Mindstorms NXT Toolbox (free & open-source).
Simulink is a block diagram environment for modeling and simulating dynamic systems. Using Simulink, a user can design and simulate control algorithms and Lego systems, and subsequently automatically program the Lego NXT or EV3. Support for programming the Lego NXT or EV3 only requires Simulink and is available at no additional charge.

MATLAB and Simulink Support for Lego Mindstorms programming is freely available. More information is at Lego Mindstorms Support from MATLAB and Simulink

Lua

pbLua is a port of the Lua programming language, a general purpose scripting language, for Lego Mindstorms.

Ada

A port of GNAT is available for the NXT. It relies on a dedicated run-time kernel based on the Ravenscar profile, the same used on the Goce satellite: this permits to use high-level Ada features to develop concurrent and real-time systems on the Mindstorms NXT.

URBI

URBI is yet another language and is a parallel and event-driven language, with interfaces to C++/Java and Matlab. It also has a component architecture (UObject) for distribution. Urbi is compatible with many robots, including Nao (cf Robocup), Bioloid or Aibo.^[12]

FLL NXT Navigation

FLL Nxt Navigation An open source program to help navigation on the FLL competition table. It uses NXT-G and .txt files to write programs. It is unknown if you can legally implement this in FLL competitions.

Ruby-nxt

Ruby-nxt is a library to program the NXT for the Ruby programming language. Unlike the other languages for the NXT, the code is not compiled to a binary file. Instead the code is directly transmitted to the NXT via a Bluetooth connection.

Robotics.NXT

Robotics.NXT is a Haskell interface to NXT over Bluetooth. It supports direct commands, messages and many sensors (also unofficial). It has also support for a simple message-based control of a NXT brick via remotely executed program (basic NXC code included).

LibNXT

LibNXT is a utility library for talking to the Lego Mindstorms NXT intelligent brick at a relatively low level. LibNXT is targeted mainly at the platforms that the official Lego Mindstorms NXT software overlooks, namely Linux and other unices. It will work on any POSIX-compliant operating system where libusb 0.1 libusb is supported. Windows support is also possible with the win32 port of libusb.

C_NXT

C_NXT is a library for controlling the Lego NXT licensed under the GPLv2. The library allows users to control a Lego NXT via bluetooth controller from within other C programs. The library provides low level control and high level abstraction. The library only runs on Linux.

PyNXC

PyNXC is a project which converts Python code to "Not Exactly C" (NXC) code, to download to Lego Mindstorms Robots.

NXT-Python

NXT-Python is a python module, which communicates with the NXT via USB or Bluetooth. It supports direct commands and several aftermarket sensors.

LEGO Mindstorms EV3 Software

The software which ships with the newer Mindstorms EV3 set can be used to program the NXT.^[13] At the moment, Bluetooth is not supported for the NXT, so programs must be downloaded via a USB cable.

Physical Etoys

Physical Etoys is a visual programming system for different electronic devices. It supports direct mode and compiled mode.

C/C++ Interpreter Ch

Ch is a C/C++ interpreter running C/C++ code to control Lego NXT or EV3. No firmware upload/download is required, no compilation is needed. A C/C++ code running in Ch can control either a Lego NXT, EV3, or multiple of NXT/EV3.^[14]

Sensors

The Lego Mindstorms NXT 1.0 base kit includes:^[15]

3 identical servo motors that have built-in reduction gear assemblies with internal optical rotary encoders that sense their rotations within one degree of accuracy.^[16]
The touch sensor detects whether it is currently pressed, has been bumped, or released. The orange Enter button and the gray right and left NXT buttons can be programmed to serve as touch sensors. In the NXT-G programming software, a value of 0 is given out when it is not pressed, and a value of 1 is given out if it is pressed down.^[17]
The light sensor detects the light level in one direction, and also includes a LED for illuminating an object. The light sensor can sense reflected light values (using the built-in red LED), or ambient light. In the NXT-G programming software the sensor senses light on a scale of 0 to 100, 100 being very bright and 0 being dark.^[18] If calibrated, the sensor can also be used as a distance sensor.
The sound sensor measures volume level on a scale of 0 to 100, 100 being very loud, 0 being completely silent.
The ultrasonic sensor can measure the distance from the sensor to something that it is facing, and detect movement. It can show the distance in both centimeters and inches. The maximum distance it can measure is 233 cm with a precision of 3 centimeters. The ultrasonic sensor works by sending out ultrasonic sound waves that bounce off an object ahead of it and then back. It senses the time it took for that to happen.^[19] In the Lego Mindstorms 2.0 base kit, it includes: 2 Touch sensors, one Color sensor (detects several different colors), and an Ultrasonic sensor.

These parts are not included in the Lego Mindstorms NXT base kit and may be bought separately:^[20]

Third-party companies also manufacture sensors such as the compass, gyroscope, infrared tracker, RFID reader and accelerometer sensors sold by Lego.
The temperature sensor can measure temperature in Celsius or Fahrenheit.

The sensors come assembled and programmed. In the software (see Programming above), people can decide what to do with the information that comes from the sensors, such as programming the robot move forward until it touches something. ^{[citation needed]}

Lego also sells an adapter to the Vernier sensor product line. Vernier produces data collection devices and related software for use in education. ^{[citation needed]}

Connector

Sensors are connected to the NXT brick using a 6-position modular connector that features both analog and digital interfaces. The analog interface is backward-compatible (using an adapter) with the older Robotics Invention System. The digital interface is capable of both I²C and RS-485 communication.

NXT Sensor Interface Pinout
Pin	Name	Function	Color
1	ANALOG	Analog interface, +9V Supply	white
2	GND	Ground	black
3	GND	Ground	red
4	IPOWERA	+4.3V Supply	green
5	DIGIAI0	I²C Clock (SCL), RS-485 B	yellow
6	DIGIAI1	I²C Data (SDA), RS-485 A	blue

NXT 2.0

Lego Mindstorms NXT 2.0 is the second set from LEGO's Lego Mindstorms series, launched on August 5, 2009 at the Lego Shop in the U.S. The set contains 619 pieces, including a new sensor that can detect colors. It is priced at approximately US$280, C$350, £230 or A$500. Lego Mindstorms NXT 2.0 has a successor, called the Lego Mindstorms EV3.^[21]

8547 Kit Features

Includes a sound editor for recording any sound and then programming the NXT Brick to play it.
Includes an image editor for downloading an image to the NXT Brick to appear on the screen.
Includes 619 pieces (including the NXT Brick)

NXT Intelligent Brick

32-bit Atmel AT91SAM7S256 main microcontroller (256 KB flash memory, 64 KB RAM)
8-bit Atmel ATmega48 microcontroller @ 4 MHz (4 KB flash memory, 512 Bytes RAM)
100×64 pixel LCD screen
Four RJ12 input ports (ports 1-4)
Three RJ12 output ports (ports A-C)
USB port
Bluetooth Class II V2.0
Loudspeaker – 8 kHz sound quality, 8-bit resolution, 2–16 kHz sample rate
Four push buttons, used to navigate menus and can be used in programs.
Powered by six AA batteries or the NXT rechargeable battery

Sensors

Parts can be ordered separately. In the original kit, the sensors included are the color sensor, two touch sensors, and an ultrasonic sensor:

Color sensor (9694), for detecting 6 different colors: blue, green, red, yellow, white, black
Light sensor (9844), for detecting levels of light. (Included in first version, but in 2.0, replaced by color sensor.)
Touch sensor (9843), a simple button that senses if something collided with it.
Ultrasonic sensor (9846), for measuring distances using inaudible sound waves.
Sound sensor (9845), for basic "hearing". Capable of measuring volume, but cannot record actual sounds.
Compass sensor (MS1034), for detecting direction. Has a built-in calibrator to reduce interference from other magnetic items. (Not included in basic kit, for advanced users.)
Accelerometer sensor (MS1040), for sensing which general direction it's moving in. Also can measure g-force. (Not included in basic kit, for advanced users.)
RFID sensor, for communication between multiple robots. (Not included in basic kit, for VERY advanced users.)
Rotation sensor (built into servo motors), for measuring how far it has turned. This is unique, because it measures based on the turn of the gears inside, rather than the motor itself. Useful for robots that will coast and act based on distance rolled.
Bluetooth communication (built into "Intelligent brick"), for communication with other devices. Can be used mid-program or for downloading new programs and data.

Actuators

Servo motor (9842)
The color sensor can shine light in red, green, or blue. (Normally it senses color by using the lamp in a setting and reading the reflected light levels. It uses the same lamp here for other uses.)

Programming

Very simple programs can be created using the NXT Intelligent Brick itself. In order to create larger, more complex programs, programming software on a PC is required. The standard programming software is NXT-G, which is included in the package. Third-party programming software is also available, some of which is listed below: