Trimethylsilyldiazomethane
Names | |
---|---|
IUPAC name
(Diazomethyl)trimethylsilane
| |
Other names
Trimethylsilyldiazomethane
Diazo(trimethylsilyl)methane | |
Identifiers | |
3D model (JSmol)
|
|
1902903 | |
ChemSpider | |
ECHA InfoCard | 100.131.243 |
EC Number |
|
MeSH | Trimethylsilyldiazomethane |
PubChem CID
|
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
C4H10N2Si | |
Molar mass | 114.223 g·mol−1 |
Appearance | greenish-yellow liquid[1][2] |
Boiling point | 96.0[1] °C (204.8 °F; 369.1 K) |
Hazards | |
GHS labelling:[3] | |
Danger | |
H330, H350, H370 | |
P201, P202, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P273, P280, P281, P284, P302+P352, P303+P361+P353, P304+P340, P307+P311, P308+P313, P310, P311, P314, P320, P332+P313, P362, P370+P378, P391, P403+P233, P403+P235, P405, P501 | |
Safety data sheet (SDS) | External MSDS[dead link] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Trimethylsilyldiazomethane is the organosilicon compound with the formula (CH3)3SiCHN2. It is classified as a diazo compound. Trimethylsilyldiazomethane, which is a commercially available, reagent used in organic chemistry as a methylating agent of carboxylic acids. Its behavior is akin to the reagent diazomethane, but the trimethylsilyl (TMS) analog is nonexplosive.[4]
Preparation
Trimethylsilyldiazomethane can be prepared by treating (trimethylsilyl)methylmagnesium chloride with diphenyl phosphorazidate.[5] An isotopically labelled variant, with 13C at the diazomethyl carbon, is also known.[6]
Reactions
Trimethylsilyldiazomethane is useful for conversion of carboxylic acids to their methyl esters in high yield. The typical reaction conditions for this purpose use methanol as a cosolvent. Under these conditions, diazomethane itself is generated in situ as the active methylating agent, by an acid-catalyzed reaction between trimethylsilyldiazomethane and the alcohol with trimethylsilyldiazomethane as byproduct:[7]
When the methanol is omitted, substantial amounts of trimethylsilyl ester and trimethylmethyl ester products are formed as well.[7]
It also reacts with alcohols to give methyl ethers, whereas diazomethane may not.[8]
The compound is a reagent in the Doyle–Kirmse reaction with allyl sulfides and allyl amines.
Trimethylsilyldiazomethane is deprotonated by butyllithium:
- (CH3)3SiCHN2 + BuLi → (CH3)3SiCLiN2 + BuH
The lithio compound is versatile. From it can be prepared other trimethylsilyldiazoalkanes:
- (CH3)3SiCLiN2 + RX → (CH3)3SiCRN2 + LiX
(CH3)3SiCLiN2 reacts with ketones and aldehydes to give, depending on the substituents, acetylenes.[9]
Applications
It has also been employed widely in tandem with GC-MS for the analysis of various carboxylic compounds which are ubiquitous in nature. The fact that the reaction is rapid and occurs readily makes it attractive. However, it can form artifacts which complicate spectral interpretation. Such artifacts are usually the trimethylsilylmethyl esters, RCO2CH2SiMe3, formed when insufficient methanol is present. Acid-catalysed methanolysis is necessary to achieve near-quantitative yields of the desired methyl esters, RCO2Me.[7]
Safety
Trimethylsilyldiazomethane is highly toxic. It has been implicated in the death of at least two chemists, a pharmaceutical worker in Windsor, Nova Scotia and one in New Jersey.[10][11][12] Inhalation of diazomethane is known to cause pulmonary edema; trimethylsilyldiazomethane is suspected to behave similarly.[13]
It is possible that upon contact with water on the surface of the lung, trimethylsilyldiazomethane converts to diazomethane.[13]
Trimethylsilyldiazomethane is nonexplosive.[5]
References
- ^ a b Seyferth, Dietmar.; Dow, Alan W.; Menzel, Horst.; Flood, Thomas C. (1968). "Trimethylsilyldiazomethane and trimethylsilylcarbene". J. Am. Chem. Soc. 90 (4): 1080–1082. doi:10.1021/ja01006a055.
- ^ Seyferth, Dietmar; Menzel, Horst; Dow, Alan W.; Flood, Thomas C. (1972). "Trimethylsilyl-substituted diazoalkanes I. Trimethylsilyldiazomethane". J. Organomet. Chem. 44 (2): 279–290. doi:10.1016/S0022-328X(00)82916-2.
- ^ "Trimethylsilyldiazomethane". pubchem.ncbi.nlm.nih.gov.
- ^ Shioiri, Takayuki; Aoyama, Toyohiko; Snowden, Timothy (2001). "Trimethylsilyldiazomethane". e-EROS Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rt298.pub2. ISBN 0471936235.
- ^ a b Takayuki Shioiri; Toyohiko Aoyama; Shigehiro Mori (1990). "Trimethylsilyldiazomethane". Organic Syntheses. 68: 1. doi:10.15227/orgsyn.068.0001.
- ^ Nottingham, Chris; Lloyd-Jones, Guy C. (2018). "Trimethylsilyldiazo[13C]methane: A Versatile 13C-Labelling Reagent". Organic Syntheses. 95: 374–402. doi:10.15227/orgsyn.095.0374. hdl:20.500.11820/c801073c-6b4b-4a85-be68-2c4313b6e53d.
- ^ a b c Kühnel, E.; Laffan, D. D. P.; Lloyd-Jones, G. C.; Martínez del Campo, T.; Shepperson, I. R.; Slaughter, J. L. (2007). "Mechanism of Methyl Esterification of Carboxylic Acids by Trimethylsilyldiazomethane". Angew. Chem. Int. Ed. 46 (37): 7075–7078. doi:10.1002/anie.200702131. PMID 17691089.
- ^ Armin Presser & Antje Hüfner (2004). "Diazo(trimethylsilyl)methane – A Mild and Efficient Reagent for the Methylation of Carboxylic Acids and Alcohols in Natural Products". Chemical Monthly. 135 (8). doi:10.1007/s00706-004-0188-4. S2CID 93420685.
- ^ Moody, Christopher J.; Shioiri, Takayuki; Aoyama, Toyohiko (2011). "Diazo(trimethylsilyl)methyllithium". E-EROS Encyclopedia of Reagents for Organic Synthesis. pp. 1–7. doi:10.1002/047084289X.rd019.pub2. ISBN 978-0471936237.
- ^ "Guilty plea in N.S. drug lab death".
- ^ "N.S. probe into pharma worker's death finds vent hoods turned off in lab | SaltWire". www.saltwire.com. Retrieved 2022-05-03.
- ^ "OSHA accident report regarding a trimethylsilyldiazomethane fatality". osha.gov/. Retrieved 10 April 2020.
- ^ a b Murphy, N. G.; Varney, S. M.; Tallon, J. M.; Thompson, J. R.; Blanc, P. D. (2009). "Fatal Occupational Exposure to Trimethylsilyl-Diazomethane". Clin. Toxicol. 47 (7): 712. doi:10.1080/15563650903076924. S2CID 218859698.