Jump to content

Template:Transclude list item excerpt/testcases

From Wikipedia, the free encyclopedia

Errors

[edit]
{{Transclude list item excerpt}}
{{Transclude list item excerpt|}}
{{Transclude list item excerpt| }}
{{Transclude list item excerpt|No title}}

Basic

[edit]
{{Transclude list item excerpt|Outline of forestry}}
Side by side comparison
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}
Site index is a term used in forestry to describe the potential for forest trees to grow at a particular location or "site". Site is defined as "The average age of dominate and/or codominate trees of an even-aged, undisturbed site of intolerant trees at a base age"; furthermore, the word site is used in forestry to refer to a distinct area where trees are found. Site index is used to measure the productivity of the site and the management options for that site and reports the height of dominant and co-dominant trees in a stand at a base age such as 25, 50 and 100 years. For example, a red oak with an age of 50 years and a height of 70 feet (21 m) will have a site index of 70. Site index is species specific. Common methods used to determine site index are based on tree height, plant composition and the use of soil maps. (Full article...) Site index is a term used in forestry to describe the potential for forest trees to grow at a particular location or "site". Site is defined as "The average age of dominate and/or codominate trees of an even-aged, undisturbed site of intolerant trees at a base age"; furthermore, the word site is used in forestry to refer to a distinct area where trees are found. Site index is used to measure the productivity of the site and the management options for that site and reports the height of dominant and co-dominant trees in a stand at a base age such as 25, 50 and 100 years. For example, a red oak with an age of 50 years and a height of 70 feet (21 m) will have a site index of 70. Site index is species specific. Common methods used to determine site index are based on tree height, plant composition and the use of soil maps. (Full article...)
{{Transclude list item excerpt|List of sharks}}
Should avoid non-sharks
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}

The sicklefin lemon shark (Negaprion acutidens) or sharptooth lemon shark is a species of requiem shark belonging to the family Carcharhinidae, widely distributed in the tropical waters of the Indo-Pacific. It is closely related to the better-known lemon shark (N. brevirostris) of the Americas; the two species are almost identical in appearance, both being stout-bodied sharks with broad heads, two dorsal fins of nearly equal size, and a plain yellow-tinged coloration. As its common name suggests, the sicklefin lemon shark differs from its American counterpart in having more falcate (sickle-shaped) fins. This large species grows up to 3.8 m (12 ft) long. It generally inhabits water less than 92 m (302 ft) deep in a variety of habitats, from mangrove estuaries to coral reefs.

A slow-moving predator feeding mainly on bony fishes, the sicklefin lemon shark seldom travels long distances and many individuals can be found year-round at certain locations. Like other members of its family, this species is viviparous, with females giving birth to no more than 13 pups every other year, following a gestation period of 10–11 months. Although they are potentially dangerous to humans and known to respond vigorously to any provocation, under normal circumstances, sicklefin lemon sharks are cautious and tend to retreat if approached. The IUCN has assessed this species as Endangered; its low reproductive productivity and rate of movement limits the capacity of depleted stocks to recover. Off India and Southeast Asia, this species has been severely depleted or extirpated by unregulated exploitation for its meat, fins, and liver oil. (Full article...)

The sicklefin lemon shark (Negaprion acutidens) or sharptooth lemon shark is a species of requiem shark belonging to the family Carcharhinidae, widely distributed in the tropical waters of the Indo-Pacific. It is closely related to the better-known lemon shark (N. brevirostris) of the Americas; the two species are almost identical in appearance, both being stout-bodied sharks with broad heads, two dorsal fins of nearly equal size, and a plain yellow-tinged coloration. As its common name suggests, the sicklefin lemon shark differs from its American counterpart in having more falcate (sickle-shaped) fins. This large species grows up to 3.8 m (12 ft) long. It generally inhabits water less than 92 m (302 ft) deep in a variety of habitats, from mangrove estuaries to coral reefs.

A slow-moving predator feeding mainly on bony fishes, the sicklefin lemon shark seldom travels long distances and many individuals can be found year-round at certain locations. Like other members of its family, this species is viviparous, with females giving birth to no more than 13 pups every other year, following a gestation period of 10–11 months. Although they are potentially dangerous to humans and known to respond vigorously to any provocation, under normal circumstances, sicklefin lemon sharks are cautious and tend to retreat if approached. The IUCN has assessed this species as Endangered; its low reproductive productivity and rate of movement limits the capacity of depleted stocks to recover. Off India and Southeast Asia, this species has been severely depleted or extirpated by unregulated exploitation for its meat, fins, and liver oil. (Full article...)
{{Transclude list item excerpt|List of dams and reservoirs}}
Should avoid hatnotes and See also
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}

The Peace Dam (평화의 댐) is a South Korean dam on the Bukhan River. It was built to stave off possible catastrophic flooding should the upstream Imnam Dam in North Korea collapse, either intentionally or by accident. The dam was completed in 2005. As it stands, the dam has no reservoir, and is merely preventive. Daelim Industrial Co,.Ltd, leading contractor for the Peace Dam construction project, began the construction in 2012 and ended in 2014. The design company for the project was Isan.


Construction began in 1987, in reaction to a perceived threat following the construction of the Imnam Dam by North Korea. The Bukhan River is a tributary of the Han River, and catastrophic scenarios foresaw a flood engulfing the South Korean capital of Seoul in case of an attack by North Korea. Construction was halted before completion, amidst allegations that the threat had been grossly exaggerated. Construction resumed after satellite photographs in 2002 revealed the existence of cracks in the Imnam Dam, triggering fears that it could collapse in case of heavy rains.

In September 2005, North Korea released massive quantities of water without warning, causing serious flooding just south of the border.

The Peace Dam is 601 meters wide, 125 meters tall, and capable of holding 2.61 billion tons of water. Its construction cost $429 million. (Full article...)

The Peace Dam (평화의 댐) is a South Korean dam on the Bukhan River. It was built to stave off possible catastrophic flooding should the upstream Imnam Dam in North Korea collapse, either intentionally or by accident. The dam was completed in 2005. As it stands, the dam has no reservoir, and is merely preventive. Daelim Industrial Co,.Ltd, leading contractor for the Peace Dam construction project, began the construction in 2012 and ended in 2014. The design company for the project was Isan.


Construction began in 1987, in reaction to a perceived threat following the construction of the Imnam Dam by North Korea. The Bukhan River is a tributary of the Han River, and catastrophic scenarios foresaw a flood engulfing the South Korean capital of Seoul in case of an attack by North Korea. Construction was halted before completion, amidst allegations that the threat had been grossly exaggerated. Construction resumed after satellite photographs in 2002 revealed the existence of cracks in the Imnam Dam, triggering fears that it could collapse in case of heavy rains.

In September 2005, North Korea released massive quantities of water without warning, causing serious flooding just south of the border.

The Peace Dam is 601 meters wide, 125 meters tall, and capable of holding 2.61 billion tons of water. Its construction cost $429 million. (Full article...)

Section

[edit]
{{Transclude list item excerpt|List of mountain ranges|section=Mountain ranges on planet Earth}}
Should select from Earth section, avoiding Moon
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}
{{Transclude list item excerpt|List of dams and reservoirs|section=Oceania |sectiononly=yes}}
Should pick only dams in Oceania
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}

The Yaté Dam is an arch dam on the Yaté River in Yaté commune of New Caledonia, France. The primary purpose of the dam is hydroelectric power generation and it supports a 68 MW power station. Plans for the project began in the early 1950s and the dam was designed by Coyne et Bellier. The owner and operator of the project, New Caledonian Society Energy (ENERCAL), was established on 27 August 1955 to implement the project. Construction began that year and the power station was commissioned in 1958. The dam and entire scheme was inaugurated by Jacques Soustelle, then Minister of State in charge of Overseas Departments, on 21 September 1959. It is the tallest dam and creates the largest reservoir in New Caledonia.

While the main retaining portion of the dam is an arch design, it also has a concrete gravity section and an earthen and rock-fill section. The arch dam has a height of 60 m (200 ft) and length of 200 m (660 ft). On its left side adjoins the gravity section which serves as a spillway and is 61 m (200 ft) tall. It is 100 m (330 ft) long. The embankment section located direct the northwest of the gravity portion is 280 m (920 ft) long. Water from the dam is diverted through the hillsides via two 2,600 m (8,500 ft) long penstocks to the power station downstream along the Yaté River in the town of Yaté. The difference in elevation between the dam and power station affords a hydraulic head (water drop) of 157 m (515 ft). Within the power station lies four 17 MW Francis turbine-generates which produce an average of 307 GWh annually. (Full article...)

The Yaté Dam is an arch dam on the Yaté River in Yaté commune of New Caledonia, France. The primary purpose of the dam is hydroelectric power generation and it supports a 68 MW power station. Plans for the project began in the early 1950s and the dam was designed by Coyne et Bellier. The owner and operator of the project, New Caledonian Society Energy (ENERCAL), was established on 27 August 1955 to implement the project. Construction began that year and the power station was commissioned in 1958. The dam and entire scheme was inaugurated by Jacques Soustelle, then Minister of State in charge of Overseas Departments, on 21 September 1959. It is the tallest dam and creates the largest reservoir in New Caledonia.

While the main retaining portion of the dam is an arch design, it also has a concrete gravity section and an earthen and rock-fill section. The arch dam has a height of 60 m (200 ft) and length of 200 m (660 ft). On its left side adjoins the gravity section which serves as a spillway and is 61 m (200 ft) tall. It is 100 m (330 ft) long. The embankment section located direct the northwest of the gravity portion is 280 m (920 ft) long. Water from the dam is diverted through the hillsides via two 2,600 m (8,500 ft) long penstocks to the power station downstream along the Yaté River in the town of Yaté. The difference in elevation between the dam and power station affords a hydraulic head (water drop) of 157 m (515 ft). Within the power station lies four 17 MW Francis turbine-generates which produce an average of 307 GWh annually. (Full article...)

Parameter "more"

[edit]
no parameter |more=
Side by side comparison
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}
Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. (Full article...) Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. (Full article...)
|more= (an empty value)
Side by side comparison
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}
Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. (Full article...) Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. (Full article...)
|more=Foobar
Side by side comparison
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}
Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. (Foobar) Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. (Foobar)
|more=false
Side by side comparison
{{Transclude list item excerpt}}{{Transclude list item excerpt/sandbox}}
Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy. Plant anatomy or phytotomy is the general term for the study of the internal structure of plants. Originally, it included plant morphology, the description of the physical form and external structure of plants, but since the mid-20th century, plant anatomy has been considered a separate field referring only to internal plant structure. Plant anatomy is now frequently investigated at the cellular level, and often involves the sectioning of tissues and microscopy.

References

[edit]

This section contains references and notes. It should be empty.