Template:Infobox dual roller coaster

Template documentation[view] [edit] [history] [purge]

This template is for roller coasters with two tracks. For single-tracked coasters, use {{Infobox roller coaster}}.

Usage

{{{name}}}
[[File:{{{logo}}}|{{{logo_width}}}]]
[[File:{{{image}}}|{{{image_width}}}]] {{{caption}}}
Previously known as {{{previousnames}}}
[[{{{locationarticle}}}|{{{location}}}]]
Park section	[[{{{locationarticle}}}#{{{section}}}|{{{section}}}]] - {{{subsection}}}
Coordinates	{{{coordinates}}}
Status	{{{status}}}Category:Attraction articles with custom statuses
Soft opening date	{{{soft_opened}}}
Opening date	{{{opened}}}
Closing date	{{{closed}}}
Cost	{{{cost}}}
Replaced	{{{previousattraction}}}
Replaced by	{{{replacement}}}
{{{extend}}}
General Statistics
Type	Steel – [[{{{type2}}} roller coaster|{{{type2}}}]] – [[{{{type3}}} roller coaster|{{{type3}}}]]
Manufacturer	[[{{{manufacturer}}}]]
Designer	{{{designer}}}
Model	{{{model}}}
Track layout	{{{track}}}
Lift/launch system	{{{lift}}}
	{{{name1}}}	{{{name2}}}
Height	1 ft (0.3 m)	2 ft (0.6 m)
Drop	1 ft (0.3 m)	2 ft (0.6 m)
Length	1 ft (0.3 m)	2 ft (0.6 m)
Speed	1 mph (1.6 km/h)	2 mph (3.2 km/h)
Inversions	{{{inversions1}}}	{{{inversions2}}}
Duration	{{{duration1}}}	{{{duration2}}}
Max vertical angle	{{{angle1}}}°	{{{angle2}}}°
Acceleration	{{{acceleration1}}}	{{{acceleration2}}}
G-force	{{{gforce1}}}	{{{gforce2}}}
Site Area	1 sq ft (0.093 m2)
Capacity	{{{capacity}}} riders per hour
Restraint Style	{{{restraint}}}
Height restriction	1 ft 1 in (33 cm)
Trains	{{{trains}}} trains with {{{carspertrain}}} cars. Riders are arranged {{{ridersperrow}}} across in {{{rowspercar}}} rows for a total of riders per train.
{{{custom_label_1}}}	{{{custom_value_1}}}
{{{custom_label_2}}}	{{{custom_value_2}}}
{{{custom_label_3}}}	{{{custom_value_3}}}
{{{custom_label_4}}}	{{{custom_value_4}}}
{{{custom_label_5}}}	{{{custom_value_5}}}
{{{custom_label_6}}}	{{{custom_value_6}}}
{{{custom_label_7}}}	{{{custom_value_7}}}
{{{custom_label_8}}}	{{{custom_value_8}}}
[[File:{{{virtual_queue_image}}}|x20px|link=|alt=]] {{{virtual_queue_name}}} {{{virtual_queue_status}}}
Single rider line {{{single_rider}}}
This is a Pay-Per-Use attraction
Wheelchair accessible
Must transfer from wheelchair
Assistive listening available
Closed captioning available
{{{name}}} at RCDB Pictures of {{{name}}} at RCDB

{{Infobox dual roller coaster
| name                 = <!--The name of the entire coaster.-->
| logo                 =
| logo_width           = <!--Default is 250px-->
| image                = <!--Use ONLY the filename, not a full [[File:]] link-->
| image_width          = <!--Default is 250px-->
| caption              =
| previousnames        =
| location             = <!--Must not be linked, will auto-categorize the coaster.-->
| locationarticle =
| section              = <!--Must not be linked.-->
| subsection           =
| coordinates          = <!--Use {{coord}}-->
| status               =
| soft_opened          =
| opened               = <!--Use {{Start date}}-->
| year                 = <!--To be used in addition to opened, will auto-categorize the coaster.-->
| closed               = <!--Use {{End date}}-->
| cost                 =
| previousattraction   =
| replacement          =
| extend               = <!--To add an additional location using Template:Infobox roller coaster/extend
| type                 = <!--Must be "Steel" or "Wood", nothing else. Must not be linked.-->
| type2                = <!--Must not be linked, will auto-categorize the coaster.-->
| type3                = <!--Must not be linked, will auto-categorize the coaster.-->
| manufacturer         = <!--Must not be linked, will auto-categorize the coaster.-->
| designer             =
| model                =
| track                =
| lift                 =
| name1                = <!--Name of the left track.-->
| name2                = <!--Name of the right track.-->
| height1_ft           = <!--Must be expressed in feet and may contain only numeric characters.-->
| height2_ft           = <!--Must be expressed in feet and may contain only numeric characters.-->
| drop1_ft             = <!--Must be expressed in feet and may contain only numeric characters.-->
| drop2_ft             = <!--Must be expressed in feet and may contain only numeric characters.-->
| length1_ft           = <!--Must be expressed in feet and may contain only numeric characters.-->
| length2_ft           = <!--Must be expressed in feet and may contain only numeric characters.-->
| speed1_mph           = <!--Must be expressed in miles per hour and may contain only numeric characters.-->
| speed2_mph           = <!--Must be expressed in miles per hour and may contain only numeric characters.-->
| inversions1          =
| inversions2          =
| duration1            =
| duration2            =
| angle1               = <!--Do not include "degrees", it is added automatically.-->
| angle2               = <!--Do not include "degrees", it is added automatically.-->
| acceleration1        =
| acceleration2        =
| gforce1              =
| gforce2              =
| sitearea_sqft        = <!--Must be expressed in square feet and may contain only numeric characters.-->
| capacity             = <!--Total capacity of both sides-->
| restraint            =
| restriction_ft       = <!--Must be expressed in feet and may contain only numeric characters.-->
| restriction_in       = <!--Must be expressed in inches and may contain only numeric characters.-->
| trains               = <!--Must contain only numeric characters.-->
| carspertrain         = <!--Must contain only numeric characters.-->
| rowspercar           = <!--Must contain only numeric characters.-->
| ridersperrow         = <!--Must contain only numeric characters.-->
| custom_label_1       =
| custom_value_1       =
| custom_label_2       =
| custom_value_2       =
| custom_label_3       =
| custom_value_3       =
| custom_label_4       =
| custom_value_4       =
| virtual_queue_name   =
| virtual_queue_image  = <!--Use ONLY the filename, not a full [[File:]] link-->
| virtual_queue_status = <!--should be available if above fields are used-->
| virtual_queue_name2 = 
| virtual_queue_image2= <!--Use ONLY the filename, not a full [[Image:]] link-->
| single_rider         = <!--Must be "available" if available.-->
| pay_per_use          =
| accessible           = <!--Must be "available" if available.-->
| transfer_accessible  = <!--Must be "available" if available.-->
| assistive_listening  =
| cc                   =
| rcdb_number          = <!--The number in the URL of the coaster's RCDB page-->
}}

Metric units

Infobox dual roller coaster
General Statistics
Height	1 m (3 ft)	2 m (7 ft)
Drop	1 m (3 ft)	2 m (7 ft)
Length	1 m (3 ft)	2 m (7 ft)
Speed	1 km/h (1 mph)	2 km/h (1 mph)
Site Area	1 m2 (11 sq ft)
Height restriction	10 cm (4 in)

| height1_m            =
| height2_m            =
| drop1_m              =
| drop2_m              =
| length_m             =
| length2_m            =
| speed1_km/h          =
| speed2_km/h          =
| sitearea_sqm         =
| restriction_cm       =

Additional locations

See the guidelines for the extend parameter for information on how to add information for additional locations.

[[{{{locationarticle}}}|{{{location}}}]]
Park section	[[{{{locationarticle}}}#{{{section}}}|{{{section}}}]] - {{{subsection}}}
Coordinates	{{{coordinates}}}
Status	{{{status}}}Category:Attraction articles with custom statuses
Opening date	{{{opened}}}
Closing date	{{{closed}}}
Cost	{{{cost}}}
Replaced	{{{previousattraction}}}
Replaced by	{{{replacement}}}

{{Infobox roller coaster/extend|dual=yes
| location           = <!--Must not be linked.-->
| locationarticle    = <!--Must not be linked.-->
| section            = <!--Must not be linked.-->
| subsection         = <!--Should be linked.-->
| coordinates        = <!--Use {{Coord|display=inline}}-->
| status             =
| opened             = <!--Use {{Start date}} -->
| year               = <!--Must contain only numeric characters.-->
| closed             = <!--Use {{End date}} -->
| cost               =
| previousattraction =
| replacement        =
}}

Parameters

name

The coaster's full, official name. Should not be linked.

image

The primary picture of the coaster. Use a full [[File:]] tag.

caption

The caption for the picture.

location

The park in which the coaster is located. Use the full, properly capitalized name of the park, and DO NOT link it. It will be linked automatically.

section

The section of the park in which the coaster is located. Should not be linked, a section link will be automatically generated using the location parameter. For example, a location of Six Flags Great Adventure and a section of Golden Kingdom will make this link: [[Six Flags Great Adventure#Golden Kingdom|Golden Kingdom]].

Use {{coord}}, with display=inline,title.

type

The primary type, Steel or Wood. This should not be ANYTHING else and should NOT be linked. It will be linked automatically, and the coaster will be added to the appropriate category: Category:Steel roller coasters or Category:Wooden roller coasters.

type2

The secondary type. It can be any one of the following, or another type, if appropriate:

• 4th Dimension
• Bobsled
• Duelling
• Enclosed
• Floorless
• Flying
• Indoor
• Inverted
• Launched
• Racing
• Shuttle
• Side friction
• Spinning
• Stand-up
• Suspended
• Virginia Reel
• Wild Mouse

This parameter should NOT be linked. It will be linked automatically and add the coaster to a category for that type. For example, "Inverted" will link to Inverted roller coaster and add the coaster to Category:Inverted roller coasters.

Note: This is NOT the track layout. Out and Back, Twister, Moebius Loop, Terrain etc. do not belong in this parameter, they have their own. Also, the height category (Megacoaster, Gigacoaster, Stratacoaster) doesn't belong here, it will be calculated from the height.

type3

This is exactly the same as type2. It should be used when more than one secondary type applies. For example, Dueling Dragons would be a Steel (type) Dueling (type2) Inverted (type3) coaster.

status

The current status of the coaster. Could be Under Construction (with expected opening date), Under Refurbishment (AKA being fixed), SBNO (Standing But Not Operating), Testing, Closed, or, of course, Operating.

opened

The first day on which the coaster was open to the public. Many coasters have a "soft opening" before their media day and official opening, in this case the date of the soft opening should be used. Use {{start date}}.

closed

The last day of operation. Do not use this if it is just closed for seasonal maintenance. Use {{end date}}.

extend

This parameter allows information about the same roller coaster (either relocation or mirror copy) to be added within the same infobox. It relies on Template:Infobox roller coaster/extend which contains all of the "Primary location" parameters described above. Full syntax is shown in the Additional locations section above. One or more of these templates can be concatenated together.

manufacturer

The full, official name of the coaster's primary manufacturer. This should NOT be linked, it will be automatically linked and it will add the coaster to a category for that manufacturer.

designer

The coaster's designer, if RCDB lists one. This will not be automatically linked or add the coaster to a category.

model

The coaster's model, as listed on RCDB. This will often, but not always, be the same as the secondary type. It will not be automatically linked, it should only be linked if it differs from the secondary type.

track

The track layout based on RCDB. This could be something like Out and Back, Twister, Moebius Loop, Terrain etc. Because track layouts can vary greatly from the standard ones, this parameter will not be automatically linked and will not automatically add the coaster to a category.

lift

The type of lift or launch system that this coaster uses. The most common will be a chain lift hill, but other common ones are linear motor launch track, cable lift hill, hydraulic launch track, etc. There is no automatic linking or categorizing for this parameter, please link as appropriate.

name1, name2

The names of the coaster's left and right tracks. If they don't have names, use "Left" and "Right".

height1_ft, height2_ft, drop1_ft, drop2_ft, length1_ft, length2_ft

All of the 1's are for the left track, all the 2's are for the right. Based on RCDB. All of these parameters must use values that are entirely numeric, and must be expressed in feet (if feet and inches are given, use decimals instead). The SI values of these parameters (meters and km/h, respectively) will automatically be calculated and included – this is why these parameters must be entirely numeric. For example, a height value of "230" must be used instead of "230 ft" or anything similar. Additionally, the height parameter will be used to automatically place the coaster in the appropriate height category: Megacoaster, Gigacoaster, or Stratacoaster.

speed1_mph, speed2_mph

All of the 1's are for the left track, all the 2's are for the right. All of these parameters must use values that are entirely numeric, and must be expressed in miles per hour. Based on RCDB.

inversions1, inversions2

1 for left track and 2 for right track. The number of times riders are turned upside down during the ride. Based on RCDB.

duration1, duration2

1 for left track and 2 for right track. Based on RCDB.

angle1, angle2

1 for left track and 2 for right track. The maximum vertical angle, in degrees, attained by the track. This will usually, but not always, be the angle of the first drop. Inversions are not counted – if they were, for example, any coaster with a loop would have an angle of 90 degrees, as the track attains this angle twice as part of the loop. Based on RCDB.

acceleration1, acceleration2

1 for left track and 2 for right track. The rates of acceleration of each track. Should be expressed in the form "X – Y mph in Z sec". This will normally only be used for launched coasters. Based on RCDB.

gforce1, gforce2

1 for left track and 2 for right track. The maximum G force that riders experience during the ride. Based on RCDB.

capacity

The maximum number of guests that the entire coaster (both tracks) can accommodate in one hour. Based on RCDB.

cost

The amount of money the coaster cost to build, expressed in the currency of the country where the coaster is located.

restriction_ft, restriction_in, restriction_cm

Height restriction, i.e. "You must be this tall to ride." Either

1. give the height in feet and (or) inches using {{{restriction_ft}}}, {{{restriction_in}}} or
2. give the height in centimeters using {{{restriction_cm}}}

All values must be entirely numeric. The template will automatically convert the values and display them in feet and inches and in centimeters.

trains, carspertrain, rowspercar and ridersperrow

Must be used together. If one of the fields is missing none of the information entered will be displayed. Must contain only numeric characters. Most of these statistics can be found near the bottom of an RCDB page.

custom_label_1, custom_value_1, custom_label_2, custom_value_2, etc

If there is a general statistic that is missing from the above categories, include it here. The label fields will appear in bold on the left while the values will appear normally on the right.

virtual_queue_name, virtual_queue_image, virtual_queue_status

Use these fields if there is a virtual queuing system available. The name parameter is used to describe what it is (e.g. Disney's Fastpass, Universal Express, Dreamworld's Q4U). The status field should read "available" if the virtual queuing system is available. The image parameter should contain the name without the [[File:]] or [[File:]] tag. Examples include:

• Universal express availability icon.JPG
• Fastpass availability icon.svg
• Dreamworld Q4U logo.png

single_rider, accessible, transfer_accessible

Include this field followed by the word "available" if any of these apply to the attraction. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair.

rcdb_number

The number in the URL (not the full URL) of the coaster's entry at the Roller Coaster Database. For example, Kingda Ka's RCDB page is http://rcdb.com/2832.htm so the RCDB Number for Kingda Ka is 2832.

year, manufacturer-category

These two parameters are not displayed, they are only used for adding categories to the article, as described below.

Article categories (visible)

Any article containing this template is automatically added to additional categories based on the following parameters:

status

if "announced" add Category:Proposed roller coasters

if "under construction" add Category:Proposed roller coasters

year

if defined add [[Category:Roller coasters introduced in {{{year}}}]], such as Category:Roller coasters introduced in 2001

location

if "Portable" add Category:Portable roller coasters

type

if "Steel" add Category:Steel roller coasters

if "Wood" add Category:Wooden roller coasters

if "Hybrid" add Category:Hybrid roller coasters

type2

if defined add [[Category:{{{type2}}} roller coasters]], such as Category:Inverted roller coasters

if equal to "dueling" or "racing", the article won't be added to Category:Dual-tracked roller coasters, as that category would be redundant

type3

if defined add [[Category:{{{type3}}} roller coasters]], such as Category:Dueling roller coasters

if equal to "dueling" or "racing", the article won't be added to Category:Dual-tracked roller coasters, as that category would be redundant

manufacturer

manufacturer-category

if defined add [[Category:Roller coasters manufactured by {{{manufacturer-category|{{{manufacturer}}}}}}]], such as Category:Roller coasters manufactured by Bolliger & Mabillard

height1

height2

if 200-299 add Category:Hypercoasters

if 300-399 add Category:Gigacoasters

if 400-499 add Category:Stratacoasters

Tracking categories

Hidden maintenance/tracking categories which may be added to articles using this infobox:

• Category:Wikipedia infobox roller coaster articles without coordinates (48) – if the coordinates parameter is empty or missing
• Category:Amusement ride article using undocumented parameters (6) – if any of the following parameters are defined:
  • height1 – deprecated, use height1_ft or height1_m
  • drop1 – deprecated, use drop1_ft or drop1_m
  • length1 – deprecated, use length1_ft or length1_m
  • speed1 – deprecated, use speed1_mph or speed1_km/h
  • height2 – deprecated, use height2_ft or height2_m
  • drop2 – deprecated, use drop2_ft or drop2_m
  • length2 – deprecated, use length2_ft or length2_m
  • speed2 – deprecated, use speed2_mph or speed2_km/h
  • sitearea – removed, use sitearea_sqft or sitearea_sqm
  • restriction – removed, use restriction_ft / restriction_in or restriction_cm

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

See also

The above documentation is transcluded from Template:Infobox dual roller coaster/doc. (edit | history)
Editors can experiment in this template's sandbox (edit | diff) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.