Talk:Sea chest (nautical)

Contested deletion

This page should not be deleted as an unambiguous copyright infringement, because it was copied from the U.S. Army Corps of Engineers Environmental Laboratory website which is, of course:

1. Not secret and requires no security clearance to read.

2. Funded by the U.S. Government, i.e. - us, the taxpayers.

3. Part of a publicly available research report and as such, is not protected by any copyright.

4. Additional information can be found on their website at: http://el.erdc.usace.army.mil/zebra/zmis/zmishelp/sea_chest_floating_plant.htm

Sea Chest - Floating Plant

The sea chest is a rectangular recess in the hull of a vessel that provides an intake reservoir from which piping systems draw raw water. Most sea chests are protected by removable gratings and contain baffle plates to dampen the effects of vessel speed or sea state. The intake size of sea chests varies from less than 10 cm² to several square meters.

The hard steel surfaces of the sea chest, protective grates, and baffles, combined with low water velocities created in this area, provide a suitable environment for zebra mussel attachment. Zebra mussel infestations have been found to clog the individual intakes and gates of the various water piping systems, decreasing the availability of water for onboard operations, which could result in damage to engines and other components that require water for cooling. Sea chests are, therefore, considered to be the most susceptible component to serious infestation.

Control strategies include coating all surfaces with an antifoulant such as copper-based epoxy paint or hot-dipped galvanized. Periodic inspection and replacement of grates and screens also reduces the risk. Increasing the size of the sea chests 20 to 30 percent may delay the onset of serious problems that could force an engine shutdown. Thermal treatment is a highly effective strategy for the control of zebra mussels (McMahon et al. 1995). Thermal treatment may include retrofitting a closed loop system to recirculate the heated water to the sea chest or the addition of a second sea chest system, allowing engine cooling water to be discharged through the idle sea chest. Recirculation of engine cooling water as a thermal control strategy has proved extremely effective in controlling zebra mussels (Palermo 1992, U.S. Coast Guard 1994). — Preceding unsigned comment added by Latefersupper (talk • contribs) 01:57, 30 September 2012 (UTC)[reply]

While the Army Corps of Engineers site is public domain, Wikipedia practice discourages such copy and paste. At a minimum the content should be attributed, and should preferably be appropriately rewritten and cited. I have removed the speedy deletion tag and replaced it with cleanup tags. Acroterion (talk) 03:36, 30 September 2012 (UTC)[reply]

Sea chest vs. sea chest

Isn't a "sea chest" also a phrase describing the small chests that sailors or officers use(d) to store their personal belongings in? I swear I have seen that phrase numerous times. Shouldn't it at least mention it? Here, a sea chest: http://www.gamageantiques.com/auctions/082211/5%20Hand%20painted%20sea%20chest.JPG .45Colt 16:28, 26 September 2014 (UTC)[reply]

It seems te be a special word used by the US Army. --TennisOpa (talk) 08:09, 1 October 2018 (UTC)[reply]

Links

None of the ref links work, maybe old webpages. This is an Unresolved Issue