Talk:PCB NC formats
 | This article has not yet been rated on Wikipedia's content assessment scale. |
Karloman2 (talk) 19:56, 5 November 2013 (UTC)This page rambles on with information not pertinent to the Excellon file format. trjonescp (talk) 15:54, 24 October 2008 (UTC)
I agree. The tone of this article is based on personal opinion not fact. There is no data to back up certain statements being made. This NC drill format is still in wide use today. In addition, 274X DOES NOT include the drill data. It only contains imaging data. This article needs to be rewritten. — Preceding unsigned comment added by 173.166.37.209 (talk) 17:47, 5 November 2013 (UTC)
- The comment about rambling is 5 years old, and refers to a long gone version of this article. The words in the Excellon article may need amendment, but removing then wholesale is hasty. They have been standing for many years and were viewed thousands of times, they cannot be that bad. There is a whole section on the Gerber format talk page about the relative merit of Excellon and Gerber for CAD to CAM data flow. Please read this first, and, if need be, amend the sentences in a more subtle way.Karloman2 (talk) 19:56, 5 November 2013 (UTC)
The tone of the "Indefinite NC files" section is accurate. I'm here after (or while) trying to rebuild an NC drill file produced by a leading EDA tool with the same (bad) characteristics as the article describes, down to astonishment and wonder at how a PCB manufacturer can efficiently and reliably import this data. It was returned to my client by their fab saying it could not be read (it's from a 3rd party). References or not, it's quite true. Adx (talk) 02:20, 14 December 2023 (UTC)
External links modified
[edit]Hello fellow Wikipedians,
I have just modified one external link on Excellon format. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20071030075236/http://www.excellon.com/manuals/program.htm to http://www.excellon.com/manuals/program.htm
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 02:38, 28 December 2016 (UTC)
External links modified
[edit]Hello fellow Wikipedians,
I have just modified one external link on Excellon format. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20111206220540/http://www.eurocircuits.com/index.php/technology-guidelines/pcb-layout-data to http://www.eurocircuits.com/index.php/technology-guidelines/pcb-layout-data
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 02:57, 26 September 2017 (UTC)
Should "Drill file" redirect here?
[edit]"Drill file" currently is a redlink. Would a good redirect be to this page? Adam850 (talk) 21:58, 22 August 2018 (UTC)
- Not really. Excellon is just a format for drill files, there are others. E.g. Gerber, you might as well link to Gerber format. Drill file is a more general category than Excellon file. I think a better place to link it would be Numerical control; this is very general but at least includes drill files.Ludwig Boltzmann (talk) 04:50, 25 August 2018 (UTC)
- I see "Drill file" now exists. Admittedly, it is a useful disambiguation page. However, I do not see the point to have this as an external link. It just links back to this page. It also contains a link to the Gerber format, which is useful, but then it is better to put that link directly on this page. I move to make this change. Objections, anyone?
- Another point is that "drill file" is too generic, other industries than PCBs have them. I move to replace the title with "PCB drill file" or something similar.
Ludwig Boltzmann (talk) 10:55, 20 February 2019 (UTC)
About the title of this page
[edit]There is a problem with the title of this page. The article is not about Excellon files strictly speaking, but about NC files that circulate in the PCB industry. Most of these files contain only a small number of commands, and it is impossible to know whether they are Excellon or 349 files, or something generic NC. In fact, the term Excellon file and NC file are used interchangeable. I suggest to change the title to 'PCB NC format, or PCB NC and Excellon format', or something along these lines. Mayby maintaining an Excellon format page that links to the new title page. Objections?Ludwig Boltzmann (talk) 11:03, 20 February 2019 (UTC)