Talk:Nanowire
This article is rated C-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | |||||||||||||||||||||
‹See TfM›
|
It is vital that you Podcast your pages, or/and allow the information to be downloaded via MP3 so that it can be acknowledged and digested at leisure through a computer or other Audio systems:
the resistance calculation
[edit]the conductance is given as 12.9k (ohm)-1
how come the resistance is that high in that case..also in nanowire, the electron has high mean free path which implies that the resistance is almost in m ohms
inverse of 12.9k (ohm)-1 is 0.077 m ohms..
please confirm me, if it is correct, or you meant something else.
Regards
Eswar
--Eswar1983 06:17, 5 March 2007 (UTC)
0.18 micrometer technology
[edit]I have read that chips are now made that use 0.18 micrometer wires.
Have I understood correctly?
That is 180 nanometers, right?
Is this, then, a nanowire?
--> By chips I assume you are referring to VLSI circuits in computer systems. Those are made through a several step etching and deposition method on large silicon substrates. The final product can be considered as filled channels as a better analogy than nanowires. Nano Dan (talk) 19:56, 7 January 2009 (UTC)
I dont know whether that would be called a nanowire (I dont even know who could answer that question =), but I do know that the latest CPUs are built with wires of less than 100nm in width (both Intel and AMD use 90nm for most of their CPUs nowadays I think, and are moving to 65nm), and that should qualify as a nanowire I guess.
-- Anonymous Coward
In a lab we created 200 nanometer diameter nanowires out of nickel. So I guess 180 nanometers would be a nanowire as well.
Technically, any wire that has a width under 1μm can be called a "nanowire," but the wire would probably only have novel effects if it had a diameter under 40nm or so.
VCUchem 20:57, 13 September 2006 (UTC)
In addition, nanowires of about 10nm in diameter are also observed in bacterial colonies. they can transfer electrons to and from seperate cells.
Thescwizard 20:22, 9 February 2007 (UTC)
A simple generator for experiments
[edit]At my (Institute ) we use a very simple setup to show Quantum Conductivity with nanowires.
A simple circuit controls a gold plated relay where the connectors are soft enough to drag thin nanowires between them when the relay switch off. An excellent demonstration if you own a oscilloscope and a signal generator (for controlling the relay). The relay is a RS-12V from Matsushita Automation Controls. I uploaded picture here of the result just in case it could be used in some way.
Mdj 21:43, 17 March 2007 (UTC)
Expanding the Synthesis Section
[edit]Any objections to expanding the synthesis section with sub-headings and more detailed information or should this go on a separate page? Nano Dan (talk) 20:48, 9 October 2008 (UTC)
Nanowire thickness/width
[edit]Not every structure having a thickness in the tens of nanometers is a nanowire. Every IC has a thin film with a thickness in the tens of nanometers. The width of the structure is the important dimension. I suggest changing the first two lines to:
A nanowire is a nanostructure with a diameter or thickness and width on the order of a nanometer (10−9 meters). Alternatively, nanowires can be defined as structures that have a width and thickness or diameter constrained to tens of nanometers or less and an unconstrained length. Patentatt (talk) 23:35, 14 December 2010 (UTC)
Definition of a nanowire
[edit]I don't see how the definition "the ratio of the length to width being greater than 1000" can be correct, as this would lead to most wires being classified as nanowires. For example a wire of width 3 millimeters need only be 3 meters long to classify. KingSupernova (talk) 04:30, 20 May 2016 (UTC)
External links modified (February 2018)
[edit]Hello fellow Wikipedians,
I have just modified 3 external links on Nanowire. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive http://arquivo.pt/wayback/20160514132623/http://link.aip.org/link/?APPLAB/95/143105/1 to http://link.aip.org/link/?APPLAB%2F95%2F143105%2F1
- Added archive https://web.archive.org/web/20040918144456/http://www.fkf.mpg.de/klitzing/publications/abstracts/vk00xx/vk0000.html to http://www.fkf.mpg.de/klitzing/publications/abstracts/vk00xx/vk0000.html
- Added archive https://web.archive.org/web/20071012024713/http://www.upenn.edu/pennnews/article.php?id=1217 to http://www.upenn.edu/pennnews/article.php?id=1217
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 08:02, 12 February 2018 (UTC)