Talk:Chevrolet Cobalt SS

Chevrolet Cobalt SS has been listed as one of the Engineering and technology good articles under the good article criteria. If you can improve it further, please do so. If it no longer meets these criteria, you can reassess it.

Article milestones
Date	Process	Result
October 28, 2008	Good article nominee	Listed

Automobiles Low‑importance

	Cars portal This article is within the scope of WikiProject Automobiles, a collaborative effort to improve the coverage of automobiles on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.AutomobilesWikipedia:WikiProject AutomobilesTemplate:WikiProject AutomobilesAutomobile articles
Low	This article has been rated as Low-importance on the project's importance scale.

Brands Low‑importance

	This article is within the scope of WikiProject Brands, a collaborative effort to improve the coverage of brands on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.BrandsWikipedia:WikiProject BrandsTemplate:WikiProject BrandsBrands articles
Low	This article has been rated as Low-importance on the project's importance scale.

Changes I made

Hey, Pheonix2, you've done a good job creating this article. One thing you need to do, though, is include all SS models in this page, not just the two forced induction engines. Also, we no longer link dates and we don't use bhp on American vehicles made after 1972. I also changed the spelling of a word and prioritized English measurements since this article is about an American-made car. If it were a BMW or something, it would be the opposite. The other suggestion I would make would be to start using conversion templates a lot more in the actual article instead of just showing things like the displacement in the infobox. You've done a really good job with this page and when you've got it the way you want it, I hope you'll nominate it as a Good Article. Please let me know if you need any help.--Flash176 (talk) 19:56, 15 October 2008 (UTC)[reply]

Thanks a ton for the changes and those comments; I'll work on getting the other SS Cobalt in as well. -- Phoenix2 20:07, 15 October 2008 (UTC)[reply]

Sure thing. :)--Flash176 (talk) 20:23, 15 October 2008 (UTC)[reply]

GA Review

This review is transcluded from Talk:Chevrolet Cobalt SS/GA1. The edit link for this section can be used to add comments to the review.

Hi! I will be reviewing this article for GA status, and should have the full review up soon. Dana boomer (talk) 20:14, 21 October 2008 (UTC)[reply]

GA review (see here for criteria)

It is reasonably well written.
a (prose): b (MoS):
The Model details section is confusing me a bit. This is (I'm assuming) supposed to be an overview of all three versions of the car. However, it starts out talking about the 2006/2007 model years, when you then say in the Supercharged section that that version was launched in 2004 as a 2005 model. Could you start out the introduction with a bit of intro information on the first versions of the car?

Also in the Model details section, you say "the car has more aggressive front and rear fascias". More aggressive than what?
It is factually accurate and verifiable.
a (references): b (citations to reliable sources): c (OR):
You seem to be mixing your publishers and your authors up a bit. Publishers (the company, or sometimes the individual putting the information on the web) go after the title. Authors (the actual person who wrote the information, which isn't always available) go before. So, for example, on #3, Business Week is the publisher, and there is no author. For #6, Motorsportscenter.com is the publisher, while the author is Andrew Gardner. Please go through and make sure you're not missing any more authors and that your publishers are in the right spot.

I just realized that they're formatted like this because you're using a cite press release template. Sorry I didn't notice this before...the refs are actually perfect as is. Dana boomer (talk) 12:10, 24 October 2008 (UTC)[reply]

There are a few areas that need refs:

Model details - 1st paragraph

SS Supercharged - last half of first and third paragraphs, all of second

SS Turbocharged - most of third paragraph

SS Naturally-aspirated - last sentence of second paragraph
It is broad in its coverage.
a (major aspects): b (focused):
It follows the neutral point of view policy.
Fair representation without bias:
It is stable.
No edit wars etc.:
It is illustrated by images, where possible and appropriate.
a (images are tagged and non-free images have fair use rationales): b (appropriate use with suitable captions):
Overall:
Pass/Fail:

I'm really sorry about this, but I'm being called away right now and so can't finish the review right away. I'm done with everything except finishing a copyedit/prose check, and I promise I will get to those tonight. Feel free to work on my other comments in the meantime. Dana boomer (talk) 21:00, 21 October 2008 (UTC)[reply]

I've finished my prose and copyediting, and so my review is finished. I am putting the article on hold to allow time to address the issues listed above. Let me know if you have any questions! Dana boomer (talk) 01:22, 22 October 2008 (UTC)[reply]

Thanks for the review. In response, the last sentence of the SS/NA section is attributable to GM's 2006 Cobalt info sheet, as is the majority of the article. If every piece of information I took from "ref name six" had an inline citation I thought it would get annoying but I'll add a few more where they might be needed.
I'll work on the model details section and straighten out the references. -- Phoenix2 03:41, 22 October 2008 (UTC)[reply]

Things are looking good. The only thing I can see that is left is to add in the references in a couple of the spots that I mentioned. It doesn't really matter if you're repeating refs...it's mainly important for other editors to be able to see where you got the information from. Since you're using named refs, it's not a huge deal to just drop in the name at the end, so even if you end up with a seven or eight (or even more) citations to the same ref, it's fine. Dana boomer (talk) 14:05, 23 October 2008 (UTC)[reply]

Thanks, I'll look over it again and add those citations. -- Phoenix2 05:10, 24 October 2008 (UTC)[reply]

I think that the only thing I'm waiting on is the references for those last few sections. Do you have some time to toss those in soon? Dana boomer (talk) 14:48, 27 October 2008 (UTC)[reply]

Apologies, I was working crazy hours for the last week. Have time off now so I'll add refs either today or tomorrow. Editing isn't easy right now as I'm on my phone. -- Phoenix2 15:09, 27 October 2008 (UTC)[reply]

Quite allright! I was just checking in to make sure you were still alive and active, and to make sure that you knew I was :) Dana boomer (talk) 15:16, 27 October 2008 (UTC)[reply]

I think I've got enough references in there now; I removed the quote box and integrated that text into the prose, added an image, and more citations to existing to references. -- Phoenix2 03:41, 28 October 2008 (UTC)[reply]

Things look good, so I'm passing the article to GA status. Nice work! For further improvement of the article, you could cite the end of the first paragraphs of the Model details and SS Supercharged sections, as well as the very last sentence of the SS Supercharged section. These aren't controversial assertions, so I'm not going to push it for GA, but if you want to take the article to FA status this needs to be done. Congrats on the GA! Dana boomer (talk) 12:50, 28 October 2008 (UTC)[reply]

Thanks for the review, I'll try to find citations for those sentences. -- Phoenix2 18:19, 28 October 2008 (UTC)[reply]

Psst, remember, we use these conventions and conversion templates. Ft-lbf isn't used in automotive articles, nor do we link phrases together with - only units. In other words, it should be 200 lb-ft at 4400 rpm, not 200 lb-ft at 4400 rpm. ;) --Flash176 (talk) 23:10, 19 October 2008 (UTC)[reply]

Crap, I can't get it to work. Please click on the edit button to see how I typed it with non-breaking spaces.

Thanks, I see how it's done now. -- Phoenix2 23:22, 19 October 2008 (UTC)[reply]

You're welcome. I don't know what's wrong with Wikipedia or my browser, but since the link isn't showing up for me, I'll post this again. These are the conversion templates we use for automobile projects: automotive conversion templates--Flash176 (talk) 23:36, 19 October 2008 (UTC)[reply]

External links modified

Hello fellow Wikipedians,

I have just added archive links to 2 external links on Chevrolet Cobalt SS. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true to let others know.

Y An editor has reviewed this edit and fixed any errors that were found.

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—^{cyberbot II}_{Talk to my owner:Online} 06:33, 15 February 2016 (UTC)[reply]

when will the merge be done?

when will the merge be done? it has been 1 year since the merge notice was placed ☯︎𝕎𝕚𝕜𝕚𝕡𝕖𝕕𝕚𝕒𝕟 🗣🔥 00:33, 12 April 2024 (UTC)[reply]