Talk:Cave automatic virtual environment

Wiki Education Foundation-supported course assignment

This article is or was the subject of a Wiki Education Foundation-supported course assignment. Further details are available on the course page. Student editor(s): Shine821.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 17:01, 16 January 2022 (UTC)

Image

Can anybody add images to CAVE article ? . Thanks in advance.

Definition

I've worked with CAVEs before, and the acronym has always stood for 'Camera Array Virtual Environment'. I don't think CAVE Automatic Virtual Environment even makes sense. Can I get some help with this? Bigdavesmith 12:35, 12 May 2007 (UTC)

"Camera Array..." would be some other use of the name CAVE. The VR system described in this article has nearly always been the CAVE Automatic Virtual Environment, at least since Cruz-Neira et al "The CAVE: Audio Visual Experience Automatic Virtual Environment," Communications of the ACM, June 1992 (the "CAVE Audio Visual Experience" was an alternative expansion that never caught on). My understanding has always been that it was actually a backronym to fit a nickname, which is why it may sound bit odd. (The Plato connection was just a bit of luck. Also, prior to the CAVE name, it was briefly known as the "Pocket Cathedral".) --Davepape 05:39, 13 May 2007 (UTC)

I can deal with that. Still, I spent time working with a CAVE system, as in 'Camera Array Virtual Environment', and I see no such article at Wikipedia. Perhaps it would be worth mentioning something in this article, creating another article, or redirecting. Currently, a search for 'camera array virtual environment' brings up the HIVE project at Miami University. I think this page is a closer match than that one. I'm not going to make the changes myself, since I'm both a new editor, and not an expert on the topic. If you or anyone sees fit, please do. It is also possible that my group just improperly understood the acronym, but...there were quite a few of us in quite a few locations! --Bigdavesmith 19:20, 16 May 2007 (UTC)

Michael Heim discusses the CAVE in his book The Metaphysics of Virtual Reality and calls it "CAVE Automatic Virtual Environment". He also discusses the relationship with Platos discussion in the Republic.85.125.125.202 (talk) 20:41, 5 September 2008 (UTC)

I've seen at least one group ([1]) refer to their CAVE as Chicago Automatic Virtual Environment. Wjousts (talk) 21:13, 19 January 2010 (UTC)

Commercial Systems

Other than "if you have to ask you can't afford it" I've been unable to find a price for a commercial CAVE system. —Preceding unsigned comment added by QuantumG (talk • contribs) 01:44, 6 November 2007 (UTC)

This thing was on The Outer Limits (new version) one time.151.204.23.96 11:17, 10 November 2007 (UTC)

Eliminating the rear-projection hotspot?

How do CAVE designers deal with the intensely bright hotspot caused by using a rear-projected image? If the viewer is in a position to see both the projected image and the projector behind the screen, the projector lens assembly typically produces a blinding white spot that moves around as the user's viewing position moves, due to the projector lenses not being perfectly transparent at intense light output levels and light randomly bouncing around reflecting off the interiors of the lens assembly.

Is there a proper solution to this problem? Are projectors available for CAVEs that are designed to have minimal extraneous light output? A more opaque screen may help to blot out the hotspot but at a loss of overall brightness and focus. Perhaps close-fit masking around the frame of the output image can help to reduce the hotspot? DMahalko (talk) 19:59, 4 January 2008 (UTC)

Shutter or polarized glasses for CAVE stereoscopy?

There isn't much discussion in this article of how stereoscopy is projected into the CAVE space. I'm a little mystified how polarized glasses might work in a CAVE, since it is not possible to keep the polarization axis aligned across three sidewalls and a floor. At best, alignment is possible only across the three sidewalls, but the phase of the floor will change when the viewer turns their head by 90 degrees from left to right. Looking down into a corner of the CAVE, say bottom left or bottom-right, leads to the polarization rotating about 45 degrees out of alignment for all three screens viewed, which will result in severe cross-polarization bleeding and likely a total visual mess.

In general I would assume polarized glasses only work for single-screen stereoscopic effects, where the viewer is not likely to ever be viewing the screen from an off-axis or rotated angle. It appears that all CAVEs are required to use shutter glasses. Left/right frame sync would not be affected by rotation or off-axis viewing of the screens. DMahalko (talk) 17:00, 5 January 2008 (UTC)

That's true for linear polarization, but with circular polarization, the viewing axis doesn't matter anymore. This is the same technique used in current generation 3D cinema, as well. The StarCAVE at UCSD is one example - it has a lot of small rear-projection surfaces, rather than the usual 6 large ones, each with its own projector pair. —Preceding unsigned comment added by 71.235.38.175 (talk) 21:47, 2 June 2009 (UTC)

What shutter-glasses screen refresh rates are used?

I know from my own home experiments with shutter glasses, that the screen framerate must be doubled for shutter-glasses to work properly. A regular CRT typically operates at a minimum of 60Hz to minimize flicker. For shutter glasses this rate is cut in half by the alternate framing for each eye, and requires the actual screen refresh rate be doubled to 120Hz to give the appearance of running at 60Hz.

But on a normal CRT, flickering is still noticeable in the periphery of vision at 60Hz and can cause headaches over time. Higher framerates are more desirable and reduce apparant flickering, such as 75Hz, 85Hz, or 100Hz.

For shutter-glasses, such framerates push the limits of what even the best video cards are capable of doing, requiring a refresh of 140Hz, 170Hz, or 200Hz. I know if just a handful of video cards capable of 140Hz and none that can do 170Hz.

So how do CAVE designers prevent their users from getting headaches due to low framerates? DMahalko (talk) 17:07, 5 January 2008 (UTC)

96Hz or 120Hz active stereo signals are usually used. btw. current gfx h/w has 400Mhz (or more) bandwidth (i.e. x-res x y-res x refresh-rate x eyes = bandwidth). the question today is more how can several people get perspectively correct images in a CAVE. to that end research (or better technology reuse) is currently underway to us passive stereo systems for eye separation and shuttering for user separation. faster shuttering LCDs (or even FLCs, though they have problems when exposed to certain wave bands in the electromagnetic spectrum) do help here. finally, incorporating dynamic-range image generation could be regarded as the current challenge. Regnirpsj (talk) 06:29, 9 March 2009 (UTC)

Home Cave Systems?

I'm assuming these things are too expensive for all but the very wealthy. So were computers in 1970. When should we expect to see cave systems in the home? —Preceding unsigned comment added by 72.67.35.214 (talk) 06:24, 19 May 2008 (UTC)

If you can afford a really high end home theater, you could probably afford to build a CAVE of some sort. But cost and tech have to develop alongside compelling applications (reasons to get one ... ) before you'd see widespread home use. —Preceding unsigned comment added by 71.235.38.175 (talk) 21:49, 2 June 2009 (UTC)

Please include FreeVR in the software list

I believe FreeVR should be included in the list of CAVE software, since it is intended to do what CAVElib does. --64.235.108.134 (talk) 05:30, 28 November 2011 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Cave automatic virtual environment. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20070109083006/http://inkido.indiana.edu:80/a100/handouts/cave_out.html to http://inkido.indiana.edu/a100/handouts/cave_out.html

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 14:44, 17 November 2016 (UTC)

The link to CoVE looks wrong

Points to something completely unrelated to VR... — Preceding unsigned comment added by 61.127.224.1 (talk) 03:48, 19 January 2017 (UTC)

Good catch. Resolved. DMacks (talk) 15:34, 31 October 2017 (UTC)