Stretford process
The Stretford process was developed during the late 1950s to remove hydrogen sulfide (H2S) from town gas. It was the first liquid phase, oxidation process for converting H2S into sulfur to gain widespread commercial acceptance.[1] Developed by Tom Nicklin[a] of the North Western Gas Board (NWGB) and the Clayton Aniline Company, in Manchester, England, the name of the process was derived from the location of the NWGB's laboratories, in Stretford.
The process uses reduction-oxidation (redox) chemistry to oxidise the H2S into elemental sulfur, in an alkaline solution containing vanadium as an oxygen carrier.[2]
The process earned the NWGB a Queen's Award to Industry in 1968. Although it was used in the gas industry for only a relatively short time, the process was licensed by the NWGB and used successfully in a variety of industries worldwide.[3][b] At the height of its popularity during the 1970s, there were more than a dozen companies offering the Stretford technology. By 1987, about 170 Stretford plants had been built worldwide, and more than 100 were still operating in 1992, capable of removing 400,000 tons of sulfur per year.[4] The first US plant was commissioned in 1971 at Long Beach, California, to process the gas from offshore oil wells.[citation needed]
See also
[edit]References
[edit]Notes
[edit]- ^ Nicklin had previously developed a process for improving the conversion of coal to coal gas, known as the Rochdale process.
- ^ The North Western Gas Board became part of British Gas in 1973, as a result of the Gas Act 1972.
Citations
[edit]- ^ Nagl, Gary J (2005), "The State of Liquid Redox", Gas Technology Products, Merichem Company, archived from the original on 28 September 2007, retrieved 24 May 2007
- ^ Process Screening Analysis of Alternative Gas Treating and Sulfur Removal for Gasification (PDF), SFA Pacific, 2002, retrieved 23 May 2007
- ^ Jessup (1994), p. 28
- ^ Kohl & Nielsen (1999), p. 771
Bibliography
[edit]- Jessup, John (1994), Lyon, John (ed.), Gas in the NorthWest: 1949–1994, British Gas Northwestern
- Kohl, Arthur L.; Nielsen, Richard (1999), Gas Purification (5 ed.), Gulf Professional Publishing, ISBN 978-0-88415-220-0