Jump to content

Socket G3 Memory Extender

From Wikipedia, the free encyclopedia

The Socket G3 Memory Extender (G3MX) was a planned Advanced Micro Devices' solution to the problem of connecting large amounts of memory to a single microprocessor. The G3MX was expected to be available on AMD 800S series chipset for server market starting from 2009, but was officially cancelled together with the cancellation of Socket G3 in early 2008.[1]

Electrical limitations preclude connecting more than 2 unbuffered DDR SDRAM DIMMs or 4 buffered DIMMs to a single shared bus. It is also impractical to manufacture a single chip with more than two DDR memory buses (channels). Thus, it is impossible to connect more than 8 DIMMs to a single chip. This is typically the per-processor limitation as well.

The obvious solution is to use a narrower, higher-speed bus to interface to memory, and to implement it as a point-to-point link, daisy-chaining additional modules. However, Intel have made two attempts at this, neither hugely successful:

  • RDRAM implements the bus on a DRAM chip. However, the high-speed circuitry increased power consumption, and the daisy-chaining caused significantly higher memory latency. Because it is difficult to implement high-speed circuitry on the same semiconductor process, costs were high.
  • FB-DIMMs add a separate memory controller chip to each memory DIMM. This "advanced memory buffer" (also known by the abbreviation AMB) provides the necessary high-speed circuitry. However, the same power and heat problems have arisen.

AMD's answer to this is the G3MX chip. This is very similar to the AMB, but is intended to be placed on the motherboard, not on the DIMM. It can connect to multiple DIMMs but, to minimize latency, is not designed to be daisy-chained.

The G3MX has an asymmetrical link to the processor, to match typical memory usage patterns. 20 differential signals supply read data to the processor, and 13 differential signals receive commands and write data. This totals 66 pins, less than half of what is required for a DDR2 or DDR3 interface. Thus, a processor can easily have 4 G3MX memory interfaces, each with 4 buffered DIMMs attached, allowing up to 16 DIMMs to feed one processor.

References

[edit]
  • "AMD Unveils Forward-Looking Technology Innovation To Extend Memory Footprint for Server Computing" (Press release). Advanced Micro Devices. 2007-07-25. Retrieved 2007-10-07.
  • Shaun Nichols (2007-07-25). "AMD claims memory controller breakthrough". California: vnunet.com. Retrieved 2007-10-07.
  • Marco Chiappetta (2007-08-22). "More AMD G3MX Details Emerge". HotHardware. Retrieved 2007-10-07. Also mentions rumors that Intel is working on a similar on-motherboard "AMB2".
  1. ^ (in Japanese) PC Watch report, retrieved August 20, 2008