Snipe (wood machining)

Snipe, in woodworking, is a noticeably deeper cut on the leading and/or trailing end of a board after having passed through a thickness planer or jointer. The term has its origin in forestry where it is applied to a sloping surface or bevel cut on the fore end of a log to ease dragging. (OED)

Snipe in Jointers

The cause of snipe in a jointer, is an out-feed table which is set too low relative to the cutter head.

A white cedar board showing snipe after passing through a thickness planer.

Snipe in Thickness Planers

The cause of snipe in a thickness planer is an unnecessarily high setting of the bed rollers of the in-feed table or a pressure bar which is set too high.