Jump to content

List of named alloys

From Wikipedia, the free encyclopedia
(Redirected from Silver alloys)

This is a list of named alloys grouped alphabetically by the metal with the highest percentage. Within these headings, the alloys are also grouped alphabetically. Some of the main alloying elements are optionally listed after the alloy names.

Alloys by base metal

[edit]

Aluminium

[edit]

Aluminium also forms complex metallic alloys, like β–Al–Mg, ξ'–Al–Pd–Mn, and T–Al3Mn.

Beryllium

[edit]

Bismuth

[edit]

Chromium

[edit]

Cobalt

[edit]

Copper

[edit]

Gallium

[edit]

Gold

[edit]
See also notes below[note 1]

Indium

[edit]

Iron

[edit]

Most iron alloys are steels, with carbon as a major alloying element.

Lead

[edit]

Magnesium

[edit]

Manganese

[edit]

Mercury

[edit]

Nickel

[edit]

Platinum

[edit]

Plutonium

[edit]

Potassium

[edit]

Rare earths

[edit]

Rhodium

[edit]

Silver

[edit]

Titanium

[edit]

Tin

[edit]

Uranium

[edit]

Zinc

[edit]

See also

[edit]

Notes

[edit]
  1. ^ The purity of gold alloys is expressed in karats, (UK: carats) which indicates the ratio of the minimum amount of gold (by mass) over 24 parts total. 24 karat gold is fine gold (24/24 parts), and the engineering standard[citation needed] is that it be applied to alloys that have been refined to 99.9% or better purity ("3 nines fine"). There are, however, places in the world that allow the claim of 24kt. to alloys with as little as 99.0% gold ("2 nines fine" or "point nine-nine fine).[citation needed] An alloy which is 14 parts gold to 10 parts alloy is 14 karat gold, 18 parts gold to 6 parts alloy is 18 karat, etc. This is becoming more commonly[citation needed] and more precisely expressed as a decimal fraction, i.e.: 14/24 equals .585 (rounded off), and 18/24 is .750 ("seven-fifty fine"). There are hundreds of possible alloys and mixtures possible, but in general the addition of silver will color gold green, and the addition of copper will color it red. A mix of around 50/50 copper and silver gives the range of yellow gold alloys the public is accustomed to seeing in the marketplace.[citation needed]

References

[edit]
  1. ^ Hunter, Christel (2006). Aluminum Building Wire Installation and Terminations Archived 2014-02-05 at the Wayback Machine, IAEI News, January–February 2006. Richardson, TX: International Association of Electrical Inspectors.
  2. ^ Hausner(1965) Beryllium its Metallurgy and Properties, University of California Press
  3. ^ "Ultimet® alloy - Nominal Composition". Haynes International. Archived from the original on October 5, 2016. Retrieved October 4, 2016.
  4. ^ Donald E. Kirby, D. A. O'Keefe, Thomas A. Sullivan(1972) [1], United States Department of the Interior
  5. ^ "Doehler-Jarvis Company Collection, MSS-202".
  6. ^ Woldman’s Engineering Alloys, 9th Edition 1936, American Society for Metals, ISBN 978-0-87170-691-1
  7. ^ Mathias, Paul M. (15 March 1996). "Molecular modeling in engineering design and materials development". Fluid Phase Equilibria. 116 (1–2): 225–236. Bibcode:1996FlPEq.116..225M. doi:10.1016/0378-3812(95)02891-9. Retrieved 11 July 2022.
  8. ^ "Retired Product".