SCSI log pages
It is proposed that this article be deleted because of the following concern:
If you can address this concern by improving, copyediting, sourcing, renaming, or merging the page, please edit this page and do so. You may remove this message if you improve the article or otherwise object to deletion for any reason. Although not required, you are encouraged to explain why you object to the deletion, either in your edit summary or on the talk page. If this template is removed, do not replace it. The article may be deleted if this message remains in place for seven days, i.e., after 18:41, 25 November 2024 (UTC). Find sources: "SCSI log pages" – news · newspapers · books · scholar · JSTOR |
The topic of this article may not meet Wikipedia's general notability guideline. (November 2017) |
SCSI target devices provide a number of SCSI log pages. These can be interrogated by a Log Sense command and in some cases can be set by a Log Select command. The Log Sense and Log Select commands include a 6-bit address field, allowing for 64 possible log pages. There is a standard map of log page addresses below. Note that any given SCSI device type will only support a subset of these log pages.
- 00h - supported log pages
- 01h - buffer over-run/under-run
- 02h - error counter (write)
- 03h - error counter (read)
- 04h - error counter (read reverse)
- 05h - error counter (verify)
- 06h - non-medium error
- 07h - last n error events
- 08h-2Fh - reserved
- 30h-3Eh - vendor-specific
- 3Fh - reserved