Jump to content

Ririe A Pegram Truss Railroad Bridge

Coordinates: 43°39′59″N 111°44′16″W / 43.66639°N 111.73778°W / 43.66639; -111.73778
From Wikipedia, the free encyclopedia

Ririe A Pegram Truss Railroad Bridge
Ririe A Pegram Truss Railroad Bridge is located in Idaho
Ririe A Pegram Truss Railroad Bridge
Ririe A Pegram Truss Railroad Bridge is located in the United States
Ririe A Pegram Truss Railroad Bridge
Nearest cityRirie, Idaho
Coordinates43°39′59″N 111°44′16″W / 43.66639°N 111.73778°W / 43.66639; -111.73778
Arealess than one acre
Built1894
ArchitectPegram, George H.
Architectural stylePegram through truss bridge
MPSPegram Truss Railroad Bridges of Idaho MPS
NRHP reference No.97000759[1]
Added to NRHPJuly 25, 1997

The Ririe A Pegram Truss Railroad Bridge is a Pegram truss railroad bridge which crosses the Snake River 3 miles (4.8 km) north of Ririe, Idaho. The bridge, which carries a one-track section of the East Belt Branch, consists of two truss spans and is 420 feet (130 m) long by 18 feet (5.5 m) wide. The bridge was originally constructed for a crossing in Nyssa, Oregon in 1894 for the Union Pacific Railroad and was relocated to its current site in 1914, where it carried Oregon Short Line Railroad tracks. The bridge's Pegram truss design was the work of George H. Pegram, the chief engineer for Union Pacific; as Pegram held a patent on the design, all surviving Pegram truss bridges were commissioned during Pegram's tenure with the Union Pacific and Missouri Pacific railroads.[2]

The bridge was added to the National Register of Historic Places on July 25, 1997.[1]

See also

[edit]

References

[edit]
  1. ^ a b "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. ^ Watts, Donald W. (May 20, 1997). "National Register of Historic Places Registration Form: Ririe A Pegram Truss Railroad Bridge" (PDF). National Park Service. Retrieved June 28, 2014.