Renfe Class 447

Renfe Class 447
Renfe Class 447
	Renfe Class 447 EMU at Silla (Valencia) station
	The interior of a Cercanías Valencia Renfe Class 447
Stock type	Electric multiple unit
Manufacturer	CAF, Alstom, Siemens, ABB, Adtranz
Constructed	1992-2001
Entered service	1993
Number built	183
Predecessor	Renfe Class 446, Renfe Class 445
Capacity	702 (234 seated)
Operators	Renfe
Specifications
Train length	75,993 millimetres (2,991.9 in)
Width	2,900 millimetres (110 in)
Height	4,185 millimetres (164.8 in)
Doors	6 per car
Maximum speed	120 km/h (74.56 mph)
Weight	157 t (154.5 long tons; 173.1 short tons)
Prime mover(s)	4 engines per railcar, Siemens 1TB2220-0JA03 three-phase induction 320kW engine
Power output	2,400 kW or 3,218.5 hp
Power supply	Pantograph
Electric system(s)	3 kV DC catenary
AAR wheel arrangement	Bo′Bo′+2′2′+Bo′Bo′
Safety system(s)	ASFA
Track gauge	1,668 mm (5 ft 5+21⁄32 in) (Iberian gauge), suitable for standard gauge 1,435 mm (4 ft 8+1⁄2 in)

The Renfe Class 447 is a class of electric multiple unit trains built by CAF, Alstom, Siemens, ABB, and Adtranz for Renfe Cercanías, Spain's commuter railway networks. The first units entered service in 1993.^[1]

History

In the early 1980s, Cercanías services started gaining importance in cities like Madrid and existing units, essentially Renfe Class 440, began to become insufficient. For this reason, the design of a new train model began its development. This was materialized in a prototype, Renfe Class 445, built in 1984 and tested in Madrid and Barcelona's networks until year 1990. After this, Renfe Class 446 and 447 started their manufacture process in 1989 and 1992 respectively, the second of which added some improvements to the original model. The only visually perceivable difference between 446 and 447 is that, in the first, letters "R" and "M" in the numbering system are displayed red and white respectively, while in 447, they're both yellow. This numbering is found in the top left corner of the front of the motor units, and on the sides of the Remolque units.

Technical details

Class 447 units use 3 kV DC overhead catenary line electric traction. The maximum speed of Class 447 units in service is 120 km/h. Both speed and acceleration were improved from its predecessor, Class 446. Due to the difference in performance between 447 and its counterpart, the older model is set for lines where the distance between stations is shorter (1-2 km), given its reduced maximum speed (100 km/h instead of 447's 120 km/h) didn't affect the time between stations.