Jump to content

Quincy Mine No. 2 Shaft Hoist House

Add links
Coordinates: 47°08′09″N 88°34′23″W / 47.1357°N 88.5731°W / 47.1357; -88.5731
From Wikipedia, the free encyclopedia

Quincy Mine No. 2 Shaft Hoist House
No. 2 Shaft Hoist House in 2009, on left. (Old hoist house is on right)
Quincy Mine No. 2 Shaft Hoist House is located in Michigan
Quincy Mine No. 2 Shaft Hoist House
Quincy Mine No. 2 Shaft Hoist House is located in the United States
Quincy Mine No. 2 Shaft Hoist House
LocationFranklin Township,
Houghton County, Michigan
Nearest cityHancock, Michigan
Coordinates47°08′09″N 88°34′23″W / 47.1357°N 88.5731°W / 47.1357; -88.5731
Area9 acres (3.6 ha)
Built1918
Part ofQuincy Mining Company Historic District (ID89001095)
NRHP reference No.70000271[1]
Significant dates
Added to NRHPFebruary 16, 1970
Designated CPFebruary 10, 1989
Designated MSHSDecember 12, 1969[2]

The Quincy Mine No. 2 Shaft Hoist House is an industrial building located north of Hancock, Michigan along US Highway 41 within the Quincy Mining Company Historic District. The Hoist House contains the largest steam hoisting engine in the world,[3] which sits on the largest reinforced concrete engine foundation ever poured.[3] The shaft hoist house was designated a Michigan State Historic Site in 1969[2] and listed on the National Register of Historic Places in 1970.[1]

History

[edit]
Shaft No. 2 with the old hoist house, c1906
Quincy Mine No. 2 Hoist House, 2006
Quincy Mine No. 2 Hoist House, 1978

The Quincy Mining Company was first organized in 1846,[4] and incorporated two years later, to mine the then-recently discovered Portage Lake copper formations.[2] It wasn't until 1856 that the mine hit upon their most productive lode, and it took until 1862 before the first dividend was paid.[3] However, after that time, the Quincy Mine was a reliable investment, paying dividends every year from 1867 until 1921.[3]

In the early part of the twentieth century, the shafts at Quincy Mine were increasing in depth at a prodigious rate as the company pushed farther underground in search of copper. Between 1905 and 1920, the depth of the principal shafts increased from 5000 feet to over 7000.[5] The requirements to lift rock to the surface from ever-increasing depths severely strained the capabilities of the company's mine hoist equipment.[6] By 1916, the hoist servicing the number 2 shaft had reached its depth limit.[7] Rather than abandon the shaft or eke out a little more depth by retrofitting the existing hoist, Quincy hired the Nordberg Manufacturing Company and Bruno V. Nordberg[2] to design a new hoist engine[7] at a cost of $160,000.[8] It would be the largest mine hoist in the world.[3][7]

Quincy contracted for delivery of the Nordberg engine in early 1917, but World War I intervened, delaying receipt until late 1919.[7] In the meantime, a hoist house was designed by J. H. Hoff and built by the McLean Construction Company of Chicago[9] at a cost of $43,000 for the foundation and $53,000 for the superstructure.[9] The house was essentially finished in 1918.[8] Installation of the hoist began in December 1919; it took until November 1920 before the hoist was fully operational.[8] The additional cost for installing the hoist was $34,000;[9] the total cost of the project, including building, engine, installation, and ancillary structures, was $370,000.[10] The hoist operated from 1920 until the mine closed in 1931,[2] a victim of falling copper prices.[11]

The building and hoist were restored in 1968 and are open to the public.[2]

Description

[edit]

The Quincy Mine No. 2 Shaft Hoist House is a rectangular structure, faced with red brick veneer,[9] measuring 72 by 76 feet (22 by 23 m) in plan[2] and rising to a height of almost five stories.[12] The building is particularly decorative for a hoist house, containing an inordinate number of windows[9] and, originally, a green glazed tile roof.[2] By 1978, the green tile had been removed.[9] The design of the building included large doors, open interior space with no columns, and an overhead crane to facilitate the installation of the hoist.[8] The reinforced concrete foundation supporting the building and the hoist engine is particularly notable: it contains 32,000 cubic yards (24,000 m3) of material and was reputedly the largest block of reinforced concrete ever poured for such a purpose.[9] It was one of the first very large reinforced concrete buildings ever built.[12]

The hoist inside measures 60 by 54 feet (18 by 16 m) weighs 1,765,000 pounds (801,000 kg), and could pull a skip with 20,000 pounds (9,100 kg) of rock at 36.4 miles per hour (58.6 km/h).[2]

References

[edit]
  1. ^ a b "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. ^ a b c d e f g h i Quincy Mine No. 2 Shaft Hoist House Archived June 6, 2011, at the Wayback Machine from the state of Michigan, retrieved 10/15/09
  3. ^ a b c d e Quincy No. 2 Mine Hoist Archived July 17, 2011, at the Wayback Machine, from the American Society of Mechanical Engineers
  4. ^ Quincy Mining Company, Hancock, Houghton County, MI, Historic American Engineering Record, Survey number HAER MI-2, Charles K Hyde, Larry D Lankton, Charles O'Connell, Sarah McNear, p. 7
  5. ^ Survey number HAER MI-2, p. 456
  6. ^ Survey number HAER MI-2, p. 457
  7. ^ a b c d Survey number HAER MI-2, p. 461
  8. ^ a b c d Survey number HAER MI-2, p. 462
  9. ^ a b c d e f g Drawing: No. 2 Hoist House and Engine, 1918-1920, Historic American Engineering Record, Survey number HAER MI-2, John R. Carter, 1978.
  10. ^ Survey number HAER MI-2, p. 463
  11. ^ Survey number HAER MI-2, p. 473
  12. ^ a b Guided Tours & Rates from the Quincy Mine Hoist Association, retrieved 10/15/09
[edit]
Wikimedia Commons has media related to Quincy Mine No. 2 Shaft Hoist House.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Quincy_Mine_No._2_Shaft_Hoist_House&oldid=1245582024"