Pyrenees (roller coaster)

Pyrenees
Shima Spain Village
Location	Shima Spain Village
Coordinates	34°21′35″N 136°50′42″E
Status	Operating
Opening date	1997
General statistics
Type	Steel – Inverted
Manufacturer	Bolliger & Mabillard
Designer	Werner Stengel
Model	Inverted Coaster
Track layout	Custom
Lift/launch system	Chain lift hill
Height	45 m (148 ft)
Length	1,234 m (4,049 ft)
Speed	100 km/h (62 mph)
Inversions	6
Duration	1:53
Height restriction	130 cm (4 ft 3 in)
Trains	8 cars. Riders are arranged 4 across in a single row for a total of 32 riders per train.
Pyrenees at RCDB

Pyrenees is an inverted roller coaster at Shima Spain Village in Shima, Mie, Japan. It opened in 1997 and was manufactured by Swiss company Bolliger & Mabillard. This roller coaster is inspired by the Pyrenees mountain range, being the natural border between Andorra, France and Spain.

Ride experience

The train departs the station and immediately begins to ascend the 45-metre-tall (148 ft) lift hill. Once the train has crested the top of the lift hill, it banks to the right and drops at 100 kilometres per hour (62 mph) into a vertical loop. Exiting the vertical loop, the train then enters a zero-g roll, and then another vertical loop. Coming out of the second vertical loop, the train makes a high speed banked turn to the left and travels up into a cobra roll. Leaving the cobra roll, the train travels into a right hand helix which goes through the center of the second vertical loop. Pulling out of the helix, the train enters the mid-course brake run. Following the mid-course brake run, the train drops and enters a corkscrew which leads into a wide banked turn to the left. The train then travels over a small hill before making a right turn that leads into the final brake run.