Jump to content

Piercing point

From Wikipedia, the free encyclopedia
Microfault showing an example of a piercing point. The base of the white bed (layer), shown with red arrows, is an indication of the amount of offset on this fault. The fault is coated orange and runs from the upper left to the lower right of the picture, truncating the white bed. U.S. dime for scale.

In geology, a piercing point is defined as a feature (usually a geologic feature, preferably a linear feature) that is cut by a fault, then moved apart.[1] Reconfiguring the piercing point back in its original position is the primary way geologists can find out the minimum slip, or displacement, along a fault. This can be done on a large scale (over many kilometers[2]), a small scale (inside a single outcrop or fault trench[3]) or even a single hand sample/rock (see image).

Items that are usually used in a piercing point study include large geologic formations or other rock units that can be matched either stratigraphically, geochemically, or by age dating. Features that are linear or planar, like a stratigraphic unit, are much better for use in a piercing point study than rounds or irregular-shaped objects, such as a pluton, because the reconstruction is always more precise with a more predictable shape (because of the Principle of lateral continuity). Of course, it is important to keep in mind that piercing points only give a minimum amount of offset that fault could have taken. In certain situations, rock units can be created as fault movement occurs, making the piercing point measurement even less than a minimum value.[citation needed]

Mason Hill and Thomas Dibblee were the first to use piercing points along the San Andreas Fault, notably the Pelona schist in the San Gabriel Mountains and Orocopia schist in the Orocopia Mountains, in 1953;[4] they showed at least 250 km (160 mi) of slip using that piercing point.[5][6] Another famous example of San Andreas fault piercing points include the unique rocks at Point Lobos State Reserve and Point Reyes National Seashore.[7][8] Though 180 km apart, the rocks match exactly: they were cut and separated by the fault. A complete, detailed analysis shows that the movement, while uncertain because of the various piercing points used, is over 300 km (190 mi) since the Miocene.[6][9] Piercing points are used on faults other than the San Andreas, like the Hilina fault system in Hawaii[10] and the Lake Clark fault system in Alaska.[11]

In rare situations, even human structures built across a fault can be used, like an Ottoman Empire-era canal berm that was offset along the North Anatolian Fault zone in a 1754 earthquake and the 1999 Izmit earthquake in Turkey.[12] The berm showed 3–4 meters (9.8–13.1 ft) of movement in the 1999 earthquake.[12]

References

[edit]
  1. ^ E. Keller and N. Pinter, 2002, Active Tectonics: Earthquakes, Uplift, and Landscape, Second Edition, p. 355
  2. ^ Richard Oliver Lease, Nadine McQuarrie, Michael Oskin, and Andrew Leier, 2009, Quantifying Dextral Shear on the Bristol-Granite Mountains Fault Zone: Successful Geologic Prediction from Kinematic Compatibility of the Eastern California Shear Zone, Journal of Geology, Volume 117, p. 37–53
  3. ^ S Baker, 2005, Pseudotachylyte-generating faults in Central Otago, New Zealand, Tectonophysics, Volume: 397, Issue: 3-4, Publisher: Elsevier, Pages: 211-223
  4. ^ Hill, M.L., and Dibblee, T.W., Jr., 1953, San Andreas, Garlock, and Big Pine faults, California-a study of the character, history, and tectonic significance of their displacements: Geological Society of America Bulletin, v. 64, no. 4, p. 443-458.
  5. ^ Crowell, J.C., 1962, Displacement along the San Andreas fault, California: Geological Society of America Special Paper 71, 61 p. 1981, An outline of the tectonic history of southeastern California, in Ernst, W.G., ed., The geotectonic development of California (Rubey volume 1): Englewood Cliffs, N.J., Prentice-Hall, p.583-600.
  6. ^ a b Naeim, Farzad (1992–1994). "DISPLACEMENT OF BASEMENT ROCKS BY THE SAN ANDREAS FAULT". An overview of the history, geology, geomorphology, geophysics, and seismology of the most well-known plate-tectonics boundary in the world. John A. Martin and Associates, Inc. Retrieved June 24, 2012.
  7. ^ Kathleen Burnham, Update Re: Predictive Late Cretaceous to Early Miocene Paleogeography of the San Andreas Fault System Derived from Detailed Multidisciplinary Conglomerate Correlations, AAPG Search and Discovery Article #90076©2008 AAPG Pacific Section, Bakersfield, California
  8. ^ Alden, Andrew (June 6, 2008). "A World-Class Piercing Point". About.com. Archived from the original on March 15, 2012. Retrieved June 24, 2012.
  9. ^ Huffman, O.F., 1972, Lateral displacement of Upper Miocene rocks and the Neogene history of offset along the San Andreas fault in central California: Geological Society of America Bulletin, v. 83, no. 10, p. 2913-2946.
  10. ^ Complete Report for Hilina fault system, 'Apua Pali section (Class A) No. 2610m
  11. ^ 26 km of Offset on the Lake Clark Fault Since Late Eocene Time
  12. ^ a b "SCEC Geologic Investigations of the August 17, 1999 Izmit, Turkey Earthquake". Archived from the original on January 8, 2013. Retrieved June 19, 2012.