Module:Location map/data/Trinidad and Tobago/doc
| name | Trinidad and Tobago | |||
|---|---|---|---|---|
| border coordinates | ||||
| 11.45 | ||||
| -62.05 | ←↕→ | -60.4 | ||
| 9.85 | ||||
| map center | 10°39′00″N 61°13′30″W / 10.65°N 61.225°W | |||
| image | Trinidad and Tobago adm location map.svg
| |||
| ||||
| image1 | Trinidad and Tobago rel location map.svg
| |||
| ||||
Module:Location map/data/Trinidad and Tobago is a location map definition used to overlay markers and labels on an equirectangular projection map of Trinidad and Tobago. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Trinidad and Tobago":
{{Location map|Trinidad and Tobago |...}}{{Location map many|Trinidad and Tobago |...}}{{Location map+|Trinidad and Tobago |...}}{{Location map~|Trinidad and Tobago |...}}
Map definition
name = Trinidad and Tobago- Name used in the default map caption
image = Trinidad and Tobago adm location map.svg- The default map image, without "Image:" or "File:"
image1 = Trinidad and Tobago rel location map.svg- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
top = 11.45- Latitude at top edge of map, in decimal degrees
bottom = 9.85- Latitude at bottom edge of map, in decimal degrees
left = -62.05- Longitude at left edge of map, in decimal degrees
right = -60.4- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 1.65 degrees.
- At an image width of 200 pixels, that is 0.0082 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0016 degrees per pixel.
Latitude: from North to South this map definition covers 1.6 degrees.
- At an image height of 200 pixels, that is 0.008 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0016 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Trinidad and Tobago
| width = 250
| lat_deg = 10.667
| lon_deg = -61.517
| label = Port of Spain
}}
Location map many, using relief map (image1)
Port of Spain
{{Location map many | Trinidad and Tobago
| relief = yes
| width = 250
| caption = Two locations in Trinidad and Tobago
|
| lat1_deg = 10.667
| lon1_deg = -61.517
| label1 = <br/>Port of Spain
| position1 = left
| mark1 = yellow_pog.svg
|
| lat2_deg = 11.183
| lon2_deg = -60.738
| label2 = Scarborough
| position2 = bottom
| mark2 = yellow_pog.svg
}}
Location map+, using AlternativeMap
Port of Spain
{{Location map+ | Trinidad and Tobago
| AlternativeMap = Trinidad and Tobago location map Topographic.png
| width = 250
| caption = Two locations in Trinidad and Tobago
| places =
{{Location map~ | Trinidad and Tobago
| lat_deg = 10.667
| lon_deg = -61.517
| label = <br/>Port of Spain
| position = left
| mark = yellow_pog.svg
}}
{{Location map~ | Trinidad and Tobago
| lat_deg = 11.183
| lon_deg = -60.738
| label = Scarborough
| position = bottom
| mark = yellow_pog.svg
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels