Module:Location map/data/Australia Tasmania/doc
| name | Tasmania | |||
|---|---|---|---|---|
| border coordinates | ||||
| -39 | ||||
| 143.5 | ←↕→ | 149 | ||
| -44 | ||||
| map center | 41°30′S 146°15′E / 41.5°S 146.25°E | |||
| image | Australia Tasmania location map.svg
| |||
| ||||
| image1 | Relief Map of Tasmania.png
| |||
| ||||
| image2 | Australia Tasmania location map blank.svg
| |||
| ||||
Module:Location map/data/Australia Tasmania is a location map definition used to overlay markers and labels on an equirectangular projection map of Tasmania. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Australia Tasmania":
{{Location map|Australia Tasmania |...}}{{Location map many|Australia Tasmania |...}}{{Location map+|Australia Tasmania |...}}{{Location map~|Australia Tasmania |...}}
Map definition
name = Tasmania- Name used in the default map caption
image = Australia Tasmania location map.svg- The default map image, without "Image:" or "File:"
image1 = Relief Map of Tasmania.png- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
image2 = Australia Tasmania location map blank.svg- Alternative map image which can be displayed via the AlternativeMap parameter
top = -39- Latitude at top edge of map, in decimal degrees
bottom = -44- Latitude at bottom edge of map, in decimal degrees
left = 143.5- Longitude at left edge of map, in decimal degrees
right = 149- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 5.5 degrees.
- At an image width of 200 pixels, that is 0.0275 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0055 degrees per pixel.
Latitude: from North to South this map definition covers 5 degrees.
- At an image height of 200 pixels, that is 0.025 degrees per pixel.
- At an image height of 1000 pixels, that is 0.005 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Australia Tasmania
| width = 200
| label = Hobart
| lat_deg = 42 | lat_min = 52 | lat_sec = 50 | lat_dir = S
| lon_deg = 147 | lon_min = 19 | lon_sec = 30 | lon_dir = E
}}
Location map many, using relief map (image1)
{{Location map many | Australia Tasmania
| relief = yes
| width = 200
| caption = Locations in Tasmania
| lat1 = -39.93 | long1 = 143.85 | label1 = Currie
| lat2 = -43.58 | long2 = 146.87 | label2 = Cockle Creek
| lat3 = -41.05 | long3 = 144.67 | label3 = Arthur River
| lat4 = -42.12 | long4 = 148.28 | label4 = Coles Bay
}}
Location map+, using AlternativeMap
{{Location map+ | Australia Tasmania
| AlternativeMap=Australia Tasmania location map blank.svg
| width = 200
| caption = Locations in Tasmania
| places =
{{Location map~ | Australia Tasmania
| lat = -39.93 | long = 143.85 | label = Currie
}}
{{Location map~ | Australia Tasmania
| lat = -43.58 | long = 146.87 | label = Cockle Creek
}}
{{Location map~ | Australia Tasmania
| lat = -41.05 | long = 144.67 | label = Arthur River
}}
{{Location map~ | Australia Tasmania
| lat = -42.12 | long = 148.28 | label = Coles Bay
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels