Jump to content

Metal–halogen exchange

From Wikipedia, the free encyclopedia

In organometallic chemistry, metal–halogen exchange is a fundamental reaction that converts an organic halide into an organometallic product. The reaction commonly involves the use of electropositive metals (Li, Na, Mg) and organochlorides, bromides, and iodides. Particularly well-developed is the use of metal–halogen exchange for the preparation of organolithium compounds.

Lithium–halogen exchange

[edit]

Two kinds of lithium–halogen exchange can be considered: reactions involving organolithium compounds and reactions involving lithium metal. Commercial organolithium compounds are produced by the heterogeneous (slurry) reaction of lithium with organic bromides and chlorides:

2 Li + R−X → LiX + R−Li

Often the lithium halide remains in the soluble product.

Most of this article is about the homogeneous (one-phase) reaction of preformed organolithium compounds:

R−Li + R′−X → R−X + R′−Li

Butyllithium is commonly used. Gilman and Wittig independently discovered this method in the late 1930s.[1] It is not a salt metathesis reaction, as no salt is produced.

Lithium–halogen exchange is frequently used to prepare vinyl-, aryl- and primary alkyllithium reagents. Vinyl halides usually undergo lithium–halogen exchange with retention of the stereochemistry of the double bond.[2] The presence of alkoxyl or related chelating groups accelerates lithium–halogen exchange.[3] Lithium halogen exchange is typically a fast reaction. It is usually faster than nucleophilic addition and can sometimes exceed the rate of proton transfer.[4]

Exchange rates usually follow the trend I > Br > Cl. Alkyl- and arylfluoride are generally unreactive toward organolithium reagents. Lithium–halogen exchange is kinetically controlled, and the rate of exchange is primarily influenced by the stabilities of the carbanion intermediates (sp > sp2 > sp3) of the organolithium reagents.[5][3]

Mechanism and scope

[edit]

Two mechanisms have been proposed for lithium–halogen exchange.[6] One proposed pathway involves a nucleophilic mechanism that generates a reversible "ate-complex" intermediate. Farnham and Calabrese crystallized an "ate-complex" lithium bis(pentafluorophenyl) iodinate complexed with TMEDA.[7] The "ate-complex" further reacts with electrophiles and provides pentafluorophenyl iodide and C6H5Li.[7] A number of kinetic studies also support a nucleophilic pathway in which the carbanion on the lithium species attacks the halogen atom on the aryl halide.[8] Another proposed mechanism involves single electron transfer with the generation of radicals. In reactions of secondary and tertiary alkyllithium and alkyl halides, radical species were detected by EPR spectroscopy.[9][6] The mechanistic studies of lithium–halogen exchange are complicated by the formation of aggregates of organolithium species.

Other metals

[edit]
Magnesium–halogen exchange

Grignard reagents can be prepared by treating a preformed Grignard reagent with an organic halide. This method offers the advantage that the Mg transfer tolerates many functional groups. A typical reaction involves isopropylmagnesium chloride and aryl bromide or iodides:[10]

i-PrMgCl + ArCl → i-PrCl + ArMgCl

Magnesium ate complexes metalate aryl halides:[11]

ArBr + Li[MgBu3] → ArMgBu2 + BuBr
Zinc–halogen exchange

Zinc–halogen exchange:[12]

LiBu3Zn + R−I → Li[R−ZnBu2] + BuI

Applications

[edit]

Several examples can be found in organic syntheses.[13]

Below lithium–halogen exchange is a step in the synthesis of morphine. Here n-butyllithium is used to perform lithium–halogen exchange with bromide. The nucleophilic carbanion center quickly undergoes carbolithiation to the double bond, generating an anion stabilized by the adjacent sulfone group. An intramolecular SN2 reaction by the anion forms the cyclic backbone of morphine.[14]

Synthesis of morphine using lithium–halogen exchange
Synthesis of morphine using lithium–halogen exchange

Lithium–halogen exchange is a crucial part of Parham cyclization.[15] In this reaction, an aryl halide (usually iodide or bromide) exchanges with organolithium to form a lithiated arene species. If the arene bears a side chain with an electrophillic moiety, the carbanion attached to the lithium will perform intramolecular nucleophilic attack and cyclize. This reaction is a useful strategy for heterocycle formation.[16] In the example below, Parham cyclization was used to in the cyclization of an isocyanate to form isoindolinone, which was then converted to a nitrone. The nitrone species further reacts with radicals and can be used as "spin traps" to study biological radical processes.[17]

Parham cyclization in MitoSpin
Parham cyclization in MitoSpin

References

[edit]
  1. ^ Gilman, Henry; Langham, Wright; Jacoby, Arthur L. (1939). "Metalation as a Side Reaction in the Preparation of Organolithium Compounds". Journal of the American Chemical Society. 61 (1): 106–109. doi:10.1021/ja01870a036. ISSN 0002-7863.
  2. ^ Seebach, D.; Neumann H. (1976). "Stereospecific preparation of terminal vinyllithium derivatives by Br/Li-exchange with t-butyllithium". Tetrahedron Lett. 17 (52): 4839–4842. doi:10.1016/s0040-4039(00)78926-x.
  3. ^ a b Leroux F., Schlosser M., Zohar E., Marek I. (2004). The Preparation of Organolithium Reagents and Intermediates. New York: Wiley. ISBN 978-0-470-84339-0.{{cite book}}: CS1 maint: multiple names: authors list (link)
  4. ^ Bailey, W. F.; et al. (1986). "Metal—halogen interchange between t-butyllithium and 1-iodo-5-hexenes provides no evidence for single-electron transfer". Tetrahedron Lett. 27 (17): 1861–1864. doi:10.1016/s0040-4039(00)84395-6.
  5. ^ Carey, Francis A. (2007). "Organometallic compounds of Group I and II metals". Advanced Organic Chemistry: Reaction and Synthesis Pt. B (Kindle ed.). Springer. ISBN 978-0-387-44899-2.
  6. ^ a b Bailey, W. F.; Patricia, J. F. (1988). "The mechanism of the lithium–halogen Interchange reaction: a review of the literature". J. Organomet. Chem. 352 (1–2): 1–46. doi:10.1016/0022-328X(88)83017-1.
  7. ^ a b Farnham, W. B.; Calabrese, J. C. (1986). "Novel hypervalent (10-I-2) iodine structures". J. Am. Chem. Soc. 108 (9): 2449–2451. doi:10.1021/ja00269a055. PMID 22175602.
  8. ^ Rogers, H. R.; Houk, J. (1982). "Preliminary studies of the mechanism of metal-halogen exchange. The kinetics of reaction of n-butyllithium with substituted bromobenzenes in hexane solution". J. Am. Chem. Soc. 104 (2): 522–525. doi:10.1021/ja00366a024.
  9. ^ Fischer, H. (1969). "Electron spin resonance of transient alkyl radicals during alkyllithium-alkyl halide reactions". J. Phys. Chem. 73 (11): 3834–3838. doi:10.1021/j100845a044.
  10. ^ Knochel, P.; Dohle, W.; Gommermann, N.; Kneisel, F. F.; Kopp, F.; Korn, T.; Sapountzis, I.; Vu, V. A. (2003). "Highly Functionalized Organomagnesium Reagents Prepared through Halogen–Metal Exchange". Angewandte Chemie International Edition. 42 (36): 4302–4320. doi:10.1002/anie.200300579. PMID 14502700.
  11. ^ Arredondo, Juan D.; Li, Hongmei; Balsells, Jaume (2012). "Preparation of t-Butyl-3-Bromo-5-Formylbenzoate Through Selective Metal-Halogen Exchange Reactions". Organic Syntheses. 89: 460. doi:10.15227/orgsyn.089.0460.
  12. ^ Balkenhohl, Moritz; Knochel, Paul (2020). "Recent Advances of the Halogen–Zinc Exchange Reaction". Chemistry – A European Journal. 26 (17): 3688–3697. doi:10.1002/chem.201904794. PMC 7155102. PMID 31742792.
  13. ^ Adam P. Smith; Scott A. Savage; J. Christopher Love; Cassandra L. Fraser (2002). "Synthesis of 4-, 5-, and 6-methyl-2,2'-bipyridine by a Negishi Cross-coupling Strategy: 5-methyl-2,2'-bipyridine". Org. Synth. 78: 51. doi:10.15227/orgsyn.078.0051.
  14. ^ Toth, J. E.; Hamann, P. R.; Fuchs, P. L. (1988). "Studies culminating in the total synthesis of (dl)-morphine". J. Org. Chem. 53 (20): 4694–4708. doi:10.1021/jo00255a008.
  15. ^ Parham, W. P.; Bradsher, C. K. (1982). "Aromatic organolithium reagents bearing electrophilic groups. Preparation by halogen–lithium exchange". Acc. Chem. Res. 15 (10): 300–305. doi:10.1021/ar00082a001.
  16. ^ Sotomayor, N.; Lete, E. (2003). "Aryl and Heteroaryllithium Compounds by Metal–Halogen Exchange. Synthesis of Carbocyclic and Heterocyclic Systems". Curr. Org. Chem. 7 (3): 275–300. doi:10.2174/1385272033372987.
  17. ^ Quin, C.; et al. (2009). "Synthesis of a mitochondria-targeted spin trap using a novel Parham-type cyclization". Tetrahedron. 65 (39): 8154–8160. doi:10.1016/j.tet.2009.07.081. PMC 2767131. PMID 19888470.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Metal–halogen_exchange&oldid=1177056284"