List of ISO standards 16000–17999
Appearance
This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]
The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]
ISO 16000 – ISO 16999
[edit]- ISO/TR 16015:2003 Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- ISO 16016:2016 Technical product documentation – Protection notices for restricting the use of documents and products
- ISO 16020:2005 Steel for the reinforcement and prestressing of concrete – Vocabulary
- ISO/IEC 16022:2006 Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification
- ISO/IEC 16023:2000 Information technology - International symbology specification - MaxiCode
- ISO 16032:2004 Acoustics – Measurement of sound pressure level from service equipment in buildings – Engineering method
- ISO 16034:2002 Ophthalmic optics – Specifications for single-vision ready-to-wear near- vision spectacles
- ISO 16039:2004 Road construction and maintenance equipment – Slipform pavers – Definitions and commercial specifications
- ISO 16054:2000 Implants for surgery – Minimum data sets for surgical implants
- ISO/TR 16056 Health informatics - Interoperability of telehealth systems and networks
- ISO/TR 16056-1:2004 Part 1: Introduction and definitions
- ISO/TR 16056-2:2004 Part 2: Real-time systems
- ISO/TS 16058:2004 Health informatics – Interoperability of telelearning systems
- ISO 16059:2007 Dentistry - Required elements for codification used in data exchange
- ISO 16061:2015 Instrumentation for use in association with non-active surgical implants – General requirements
- ISO 16063 Methods for the calibration of vibration and shock transducers
- ISO 16063-1:1998 Part 1: Basic concepts
- ISO 16063-11:1999 Part 11: Primary vibration calibration by laser interferometry
- ISO 16063-12:2002 Part 12: Primary vibration calibration by the reciprocity method
- ISO 16063-13:2001 Part 13: Primary shock calibration using laser interferometry
- ISO 16063-15:2006 Part 15: Primary angular vibration calibration by laser interferometry
- ISO 16063-16:2014 Part 16: Calibration by Earth's gravitation
- ISO 16063-17:2016 Part 17: Primary calibration by centrifuge
- ISO 16063-21:2003 Part 21: Vibration calibration by comparison to a reference transducer
- ISO 16063-22:2005 Part 22: Shock calibration by comparison to a reference transducer
- ISO 16063-31:2009 Part 31: Testing of transverse vibration sensitivity
- ISO 16063-32:2016 Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation
- ISO 16063-33:2017 Part 33: Testing of magnetic field sensitivity
- ISO 16063-41:2011 Part 41: Calibration of laser vibrometers
- ISO 16063-42:2014 Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
- ISO 16063-43:2015 Part 43: Calibration of accelerometers by model-based parameter identification
- ISO 16063-45:2017 Part 45: In-situ calibration of transducers with built in calibration coil
- ISO 16069:2004 Graphical symbols - Safety signs - Safety way guidance systems (SWGS)
- ISO/IEC 16085:2006 Systems and software engineering - Life cycle processes - Risk management
- ISO 16087:2013 Implants for surgery – Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
- ISO 16103:2005 Packaging - Transport packaging for dangerous goods - Recycled plastics material
- ISO 16106:2006 Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings—Guidelines for the application of ISO 9001
- ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
- ISO 16140 Microbiology of the food chain – Method validation
- ISO 16140-1:2016 Part 1: Vocabulary
- ISO 16140-2:2016 Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
- ISO 16142 Medical devices – Recognized essential principles of safety and performance of medical devices
- ISO 16142-1:2016 Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
- ISO 16142-2:2017 Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
- ISO/TR 16153:2004 Piston-operated volumetric instruments – Determination of uncertainty for volume measurements made using the photometric method
- ISO 16155:2006 Ships and marine technology – Computer applications – Shipboard loading instruments
- ISO 16165:2013 Ships and marine technology - Marine environment protection - Terminology relating to oil spill response
- ISO/IEC TR 16166:2010 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Security of session-based communications
- ISO/IEC TR 16167:2011 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Emergency calls
- ISO 16175 Information and documentation - Principles and functional requirements for records in electronic office environments
- ISO 16175-1:2010 Part 1: Overview and statement of principles
- ISO 16175-2:2011 Part 2: Guidelines and functional requirements for digital records management systems
- ISO 16175-3:2010 Part 3: Guidelines and functional requirements for records in business systems
- ISO 16192:2017 Space systems - Experience gained in space projects (lessons learned) - Principles and guidelines
- ISO/TS 16195:2013 Nanotechnologies – Guidance for developing representative test materials consisting of nano-objects in dry powder form
- ISO/TR 16196:2016 Nanotechnologies – Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
- ISO/TR 16197:2014 Nanotechnologies – Compilation and description of toxicological screening methods for manufactured nanomaterials
- ISO 16212:2017 Cosmetics – Microbiology – Enumeration of yeast and mould
- ISO/TR 16218:2013 Packaging and the environment - Processes for chemical recovery
- ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
- ISO 16232-1:2007 Part 1: Vocabulary
- ISO 16232-2:2007 Part 2: Method of extraction of contaminants by agitation
- ISO 16232-3:2007 Part 3: Method of extraction of contaminants by pressure rinsing
- ISO 16232-4:2007 Part 4: Method of extraction of contaminants by ultrasonic techniques
- ISO 16232-5:2007 Part 5: Method of extraction of contaminants on functional test bench
- ISO 16232-6:2007 Part 6: Particle mass determination by gravimetric analysis
- ISO 16232-7:2007 Part 7: Particle sizing and counting by microscopic analysis
- ISO 16232-8:2007 Part 8: Particle nature determination by microscopic analysis
- ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter
- ISO 16232-10:2007 Part 10: Expression of results
- ISO 16239:2013 Metric series wires for measuring screw threads
- ISO 16245:2009 Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents
- ISO 16249:2013 Springs – Symbols
- ISO 16254:2016 Acoustics – Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation – Engineering method
- ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
- ISO 16269 Statistical interpretation of data
- ISO 16269-4:2010 Part 4: Detection and treatment of outliers
- ISO 16269-6:2014 Part 6: Determination of statistical tolerance intervals
- ISO 16269-7:2001 Part 7: Median - Estimation and confidence intervals
- ISO 16269-8:2004 Part 8: Determination of prediction intervals
- ISO/TS 16277 Health informatics – Categorial structures of clinical findings in traditional medicine
- ISO/TS 16277-1:2015 Part 1: Traditional Chinese, Japanese and Korean medicine
- ISO 16278:2016 Health informatics – Categorial structure for terminological systems of human anatomy
- ISO 16284:2006 Ophthalmic optics – Information interchange for ophthalmic optical equipment
- ISO/TR 16310:2014 Symbol libraries for construction and facilities management
- ISO/IEC 16317:2011 Information technology – Telecommunications and information exchange between systems – proxZzzy for sleeping hosts
- ISO/IEC/IEEE 16326:2009 Systems and software engineering - Life cycle processes - Project management
- ISO 16331 Optics and optical instruments – Laboratory procedures for testing surveying and construction instruments
- ISO 16331-1:2017 Part 1: Performance of handheld laser distance meters
- ISO 16336:2014 Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD)
- ISO/IEC 16350:2015 Information technology - Systems and software engineering - Application management
- ISO/IEC 16353:2011 Information technology – Telecommunications and information exchange between systems – Front-end configuration command for NFC-WI (NFC-FEC)
- ISO 16355 Applications of statistical and related methods to new technology and product development process
- ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD)
- ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
- ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
- ISO 16355-5:2017 Part 5: Solution strategy
- ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle
- ISO/TR 16379:2014 Tissue-engineered medical products – Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
- ISO/IEC 16382:2000 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 6 format
- ISO/IEC 16388:2007 Information technology - Automatic identification and data capture techniques - Code 39 bar code symbology specification
- ISO/IEC 16390:2007 Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification
- ISO/TS 16401 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2
- ISO/TS 16401-1:2012 Part 1: Test suite structure and test purposes
- ISO/TS 16401-2:2012 Part 2: Abstract test suite
- ISO 16402:2008 Implants for surgery – Acrylic resin cement – Flexural fatigue testing of acrylic resin cements used in orthopaedics
- ISO/TS 16407 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1
- ISO/TS 16407-1:2011 Part 1: Test suite structure and test purposes
- ISO/TS 16407-2:2012 Part 2: Abstract test suite
- ISO/TS 16410 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3
- ISO/TS 16410-1:2011 Part 1: Test suite structure and test purposes
- ISO/TS 16410-2:2012 Part 2: Abstract test suite
- ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry – Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
- ISO 16428:2005 Implants for surgery – Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
- ISO 16429:2004 Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
- ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection - Atmospheric oil mist detectors for ships
- ISO 16439:2014 Information and documentation - Methods and procedures for assessing the impact of libraries
- ISO 16443:2014 Dentistry - Vocabulary for dental implants systems and related procedure
- ISO/IEC 16448:2002 Information technology - 120 mm DVD - Read-only disk
- ISO/IEC 16449:2002 Information technology - 80 mm DVD - Read-only disk
- ISO 16457:2014 Space systems – Space environment (natural and artificial) – The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
- ISO/TS 16460:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – Communication protocol messages for global usage
- ISO/IEC 16480:2015 Information technology - Automatic identification and data capture techniques - Reading and display of ORM by mobile devices
- ISO 16484 Building automation and control systems (BACS)
- ISO 16484-1:2010 Part 1: Project specification and implementation
- ISO 16484-2:2004 Part 2: Hardware
- ISO 16484-3:2005 Part 3: Functions
- ISO 16484-5:2017 Part 5: Data communication protocol
- ISO 16484-6:2014 Part 6: Data communication conformance testing
- ISO/IEC 16485:2000 Information technology - Mixed Raster Content (MRC)
- ISO 16495:2013 Packaging - Transport packaging for dangerous goods - Test methods
- ISO/IEC 16500 Information technology – Generic digital audio-visual systems
- ISO/IEC 16500-1:1999 Part 1: System reference models and scenarios
- ISO/IEC 16500-2:1999 Part 2: System dynamics, scenarios and protocol requirements
- ISO/IEC 16500-3:1999 Part 3: Contours: Technology domain
- ISO/IEC 16500-4:1999 Part 4: Lower-layer protocols and physical interfaces
- ISO/IEC 16500-5:1999 Part 5: High and mid-layer protocols
- ISO/IEC 16500-6:1999 Part 6: Information representation
- ISO/IEC 16500-7:1999 Part 7: Basic security tools
- ISO/IEC 16500-8:1999 Part 8: Management architecture and protocols
- ISO/IEC 16500-9:1999 Part 9: Usage information protocols
- ISO/IEC TR 16501:1999 Information technology - Generic digital audio-visual systems - Technical Report on ISO/IEC 16500 - Description of digital audio-visual functionalities
- ISO/IEC 16504:2011 Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space
- ISO/IEC 16509:1999 Information technology - Year 2000 terminology
- ISO/IEC 16512 Information technology – Relayed multicast protocol
- ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework
- ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group applications
- ISO/IEC 16513:2005 Information technology – Group management protocol
- ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)
- ISO 16548:2012 Ships and marine technology - Ship design - General guidance on emergency towing procedures
- ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
- ISO/TS 16550:2014 Nanotechnologies – Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
- ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions
- ISO 16571:2014 Systems for evacuation of plume generated by medical devices
- ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures
- ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements
- ISO 16589-2:2011 Part 2: Vocabulary
- ISO 16609:2012 Financial services – Requirements for message authentication using symmetric techniques
- ISO 16610 Geometrical product specifications (GPS) – Filtration
- ISO 16612 Graphic technology - Variable printing data exchange
- ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
- ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
- ISO 16613 Graphic technology - Variable content replacement
- ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
- ISO 16622:2002 Meteorology – Sonic anemometers/thermometers – Acceptance test methods for mean wind measurements
- ISO 16628:2008 Tracheobronchial tubes – Sizing and marking
- ISO 16638 Radiological protection - Monitoring and internal dosimetry for specific materials
- ISO 16638-1:2015 Part 1: Inhalation of uranium compounds
- ISO 16641:2014 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
- ISO 16642:2017 Computer applications in terminology — Terminological markup framework
- ISO 16649 Microbiology of the food chain – Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli[Note 3]
- ISO 16649-1:2001 Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
- ISO 16649-2:2001 Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
- ISO 16649-3:2015 Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
- ISO 16654:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli O157
- ISO 16671:2015 Ophthalmic implants – Irrigating solutions for ophthalmic surgery
- ISO 16672:2015 Ophthalmic implants – Ocular endotamponades
- ISO 16682:2015 Aerospace series – Terminology for clamping devices
- ISO 16684 Graphic technology - Extensible metadata platform (XMP) specification
- ISO 16684-1:2012 Part 1: Data model, serialization and core properties
- ISO 16684-2:2014 Part 2: Description of XMP schemas using RELAX NG
- ISO/TR 16705:2016 Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
- ISO 16706:2016 Ships and marine technology - Marine evacuation systems - Load calculations and testing
- ISO 16707:2016 Ships and marine technology - Marine evacuation systems - Determination of capacity
- ISO 16739:2013 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries[1]
- ISO 16739-1:2018 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries — Part 1: Data schema[2]
- ISO 16744:2003 Dentistry — Base metal materials for fixed dental restorations [Withdrawn: replaced with ISO 22674]
- ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
- ISO 16760:2014 Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows
- ISO/TR 16764:2003 Lifts, escalators and passenger conveyors – Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
- ISO/TS 16785:2014 Electronic Fee Collection (EFC) – Interface definition between DSRC-OBE and external in-vehicle devices
- ISO/TR 16786:2015 Intelligent transport systems – The use of simulation models for evaluation of traffic management systems – Input parameters and reporting template for simulation of traffic signal control systems
- ISO 16787:2016 Intelligent transport systems – Assisted Parking System (APS) – Performance requirements and test procedures
- ISO/TS 16791:2014 Health informatics – Requirements for international machine-readable coding of medicinal product package identifiers
- ISO 16792:2015 Technical product documentation - Digital product definition data practices
- ISO 16818:2008 Building environment design – Energy efficiency – Terminology
- ISO/IEC 16824:1999 Information technology - 120 mm DVD rewritable disk (DVD-RAM)
- ISO/IEC 16825:1999 Information technology - Case for 120 mm DVD-RAM disks
- ISO 16832:2006 Acoustics – Loudness scaling by means of categories
- ISO 16840 Wheelchair seating
- ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
- ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture
- ISO/TS 16843-1:2016 Part 1: Acupuncture points
- ISO/TS 16843-2:2015 Part 2: Needling
- ISO 16894:2009 Wood-based panels – Oriented strand board (OSB) – Definitions, classification and specifications
- ISO 16902 Hydraulic fluid power – Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method
- ISO 16902-1:2003 Part 1: Pumps
- ISO 16919:2014 Space data and information transfer systems – Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
- ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Withdrawn: replaced by IATF 16949:2016]
- ISO/TS 16951:2004 Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers
- ISO/TS 16955:2016 Prosthetics – Quantification of physical parameters of ankle foot devices and foot units
- ISO/IEC 16963:2017 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of lifetime of optical disks for long-term data storage
- ISO/IEC 16969:1999 Information technology - Data interchange on 120 mm optical disk cartridges using +RW format - Capacity: 3,0 Gbytes and 6,0 Gbytes
- ISO 16971:2015 Ophthalmic instruments – Optical coherence tomograph for the posterior segment of the human eye
- ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design
ISO 17000 – ISO 17999
[edit]- ISO/IEC 17000:2004 Conformity assessment - Vocabulary and general principles
- ISO/IEC 17007:2009 Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment
- ISO/IEC 17011:2017 Conformity assessment – Requirements for accreditation bodies accrediting conformity assessment bodies
- ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
- ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
- ISO/IEC 17021-1:2015 Part 1: Requirements
- ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems
- ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems
- ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems
- ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems
- ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems
- ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems
- ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems
- ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
- ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
- ISO/IEC 17024:2012 Conformity assessment – General requirements for bodies operating certification of persons
- ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
- ISO/IEC TR 17026:2015 Conformity assessment – Example of a certification scheme for tangible products
- ISO/IEC TS 17027:2014 Conformity assessment – Vocabulary related to competence of persons used for certification of persons
- ISO/IEC TR 17028:2017 Conformity assessment – Guidelines and examples of a certification scheme for services
- ISO/IEC 17029:2019 Conformity assessment — General principles and requirements for validation and verification bodies
- ISO/IEC 17030:2003 Conformity assessment – General requirements for third-party marks of conformity
- ISO/IEC 17033:2019 Ethical claims and supporting information - Principles and requirements
- ISO 17034:2016 General requirements for the competence of reference material producers
- ISO/IEC 17040:2005 Conformity assessment – General requirements for peer assessment of conformity assessment bodies and accreditation bodies
- ISO/IEC 17043:2010 Conformity assessment – General requirements for proficiency testing
- ISO 17049:2013 Accessible design - Application of braille on signage, equipment and appliances
- ISO/IEC 17050:2004 Conformity assessment — Supplier's declaration of conformity
- ISO/IEC 17065:2012 Conformity assessment—Requirements for bodies certifying products, processes and services
- ISO 17066:2007 Hydraulic tools - Vocabulary
- ISO/IEC 17067:2013 Conformity assessment – Fundamentals of product certification and guidelines for product certification schemes
- ISO/TR 17068:2012 Information and documentation - Trusted third party repository for digital records
- ISO 17075 Leather - Chemical determination of chromium(VI) content in leather
- ISO 17075-1:2017 Part 1: Colorimetric method
- ISO 17075-2:2017 Part 2: Chromatographic method
- ISO 17080:2005 Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels
- ISO 17088:2012 Specifications for compostable plastics
- ISO 17089 Measurement of fluid flow in closed conduits – Ultrasonic meters for gas
- ISO 17089-1:2010 Part 1: Meters for custody transfer and allocation measurement
- ISO 17089-2:2012 Part 2: Meters for industrial applications
- ISO 17090 Health informatics – Public key infrastructure
- ISO 17090-1:2013 Part 1: Overview of digital certificate services
- ISO 17090-2:2015 Part 2: Certificate profile
- ISO 17090-3:2008 Part 3: Policy management of certification authority
- ISO 17090-4:2014 Part 4: Digital Signatures for healthcare documents
- ISO 17090-5:2017 Part 5: Authentication using Healthcare PKI credentials
- ISO/TR 17098:2013 Packaging material recycling - Report on substances and materials which may impede recycling
- ISO 17100:2015 Translation services—Requirements for translation services
- ISO 17115:2007 Health informatics - Vocabulary of compositional terminological systems
- ISO/TS 17117:2002 Health informatics - Controlled health terminology - Structure and high-level indicators
- ISO 17117 Health informatics — Terminological resources
- ISO 17117-1:2018 Part 1: Characteristics
- ISO/TR 17119:2005 Health informatics – Health informatics profiling framework
- ISO 17123 Optics and optical instruments – Field procedures for testing geodetic and surveying instruments
- ISO 17123-1:2014 Part 1: Theory
- ISO 17123-2:2001 Part 2: Levels
- ISO 17123-3:2001 Part 3: Theodolites
- ISO 17123-4:2012 Part 4: Electro-optical distance meters (EDM measurements to reflectors)
- ISO 17123-5:2012 Part 5: Total stations
- ISO 17123-6:2012 Part 6: Rotating lasers
- ISO 17123-7:2005 Part 7: Optical plumbing instruments
- ISO 17123-8:2015 Part 8: GNSS field measurement systems in real-time kinematic (RTK)
- ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems – Cardiovascular absorbable implants
- ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
- ISO 17185 Intelligent transport systems – Public transport user information
- ISO 17185-1:2014 Part 1: Standards framework for public information systems
- ISO/TR 17185-2:2015 Part 2: Public transport data and interface standards catalogue and cross references
- ISO/TR 17185-3:2015 Part 3: Use cases for journey planning systems and their interoperation
- ISO/TS 17187:2013 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Governance rules to sustain electronic information exchange methods
- ISO/TS 17200:2013 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements
- ISO 17201 Acoustics – Noise from shooting ranges
- ISO 17201-1:2005 Part 1: Determination of muzzle blast by measurement
- ISO 17201-2:2006 Part 2: Estimation of muzzle blast and projectile sound by calculation
- ISO 17201-3:2010 Part 3: Guidelines for sound propagation calculations
- ISO 17201-4:2006 Part 4: Prediction of projectile sound
- ISO 17201-5:2010 Part 5: Noise management
- ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
- ISO/IEC 17203:2017 Information technology – Open Virtualization Format (OVF) specification
- ISO 17208 Underwater acoustics – Quantities and procedures for description and measurement of underwater sound from ships
- ISO 17208-1:2016 Part 1: Requirements for precision measurements in deep water used for comparison purposes
- ISO 17218:2014 Sterile acupuncture needles for single use
- ISO/TS 17251:2016 Health informatics – Business requirements for a syntax to exchange structured dose information for medicinal products
- ISO 17258:2015 Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations
- ISO 17261:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Intermodal goods transport architecture and terminology
- ISO 17262:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Numbering and data structures
- ISO 17263:2012 Intelligent transport systems – Automatic vehicle and equipment identification – System parameters
- ISO 17264:2009 Intelligent transport systems – Automatic vehicle and equipment identification – Interfaces
- ISO 17267:2009 Intelligent transport systems – Navigation systems – Application programming interface (API)
- ISO/TR 17302:2015 Nanotechnologies – Framework for identifying vocabulary development for nanotechnology applications in human healthcare
- ISO/IEC 17309:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections
- ISO/IEC 17310:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
- ISO/IEC 17311:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing
- ISO 17316:2015 Information and documentation - International standard link identifier (ISLI)
- ISO 17338:2009 Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft
- ISO/IEC 17341:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
- ISO/IEC 17342:2004 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW)
- ISO/IEC 17343:2007 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and SIP – Basic services
- ISO/IEC 17344:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
- ISO/IEC 17345:2006 Information technology - Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation
- ISO/IEC 17346:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 1,3 Gbytes per cartridge
- ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs)
- ISO 17351:2013 Packaging - Braille on packaging for medicinal products
- ISO 17359:2011 Condition monitoring and diagnostics of machines – General guidelines
- ISO 17361:2017 Intelligent transport systems – Lane departure warning systems – Performance requirements and test procedures
- ISO 17363:2013 Supply chain applications of RFID - Freight containers
- ISO 17364:2013 Supply chain applications of RFID - Returnable transport items (RTIs) and returnable packaging items (RPIs)
- ISO 17365:2013 Supply chain applications of RFID - Transport units
- ISO 17366:2013 Supply chain applications of RFID - Product packaging
- ISO 17367:2013 Supply chain applications of RFID - Product tagging
- ISO 17369:2013 Statistical data and metadata exchange (SDMX)
- ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management
- ISO/TR 17384:2008 Intelligent transport systems – Interactive centrally determined route guidance (CDRG) – Air interface message set, contents and format
- ISO 17387:2008 Intelligent transport systems – Lane change decision aid systems (LCDAS) – Performance requirements and test procedures
- ISO 17398:2004 Safety colours and safety signs - Classification, performance and durability of safety signs
- ISO 17410:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of psychrotrophic microorganisms
- ISO/IEC 17417:2011 Information technology – Telecommunications and information exchange between systems – Short Distance Visible Light Communication (SDVLC)
- ISO/TS 17419:2014 Intelligent transport systems – Cooperative systems – Classification and management of ITS applications in a global context
- ISO/TS 17423:2014 Intelligent transport systems – Cooperative systems – ITS application requirements and objectives for selection of communication profiles
- ISO/TR 17424:2015 Intelligent transport systems – Cooperative systems – State of the art of Local Dynamic Maps concepts
- ISO/TS 17425:2016 Intelligent transport systems – Cooperative systems – Data exchange specification for in-vehicle presentation of external road and traffic related data
- ISO/TS 17426:2016 Intelligent transport systems – Cooperative systems – Contextual speeds
- ISO 17427 Intelligent transport systems – Cooperative ITS[Note 3]
- ISO/TS 17427:2014 Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
- ISO/TR 17427-2:2015 Part 2: Framework overview
- ISO/TR 17427-3:2015 Part 3: Concept of operations (ConOps) for 'core' systems
- ISO/TR 17427-4:2015 Part 4: Minimum system requirements and behaviour for core systems
- ISO/TR 17427-6:2015 Part 6: 'Core system' risk assessment methodology
- ISO/TR 17427-7:2015 Part 7: Privacy aspects
- ISO/TR 17427-8:2015 Part 8: Liability aspects
- ISO/TR 17427-9:2015 Part 9: Compliance and enforcement aspects
- ISO/TR 17427-10:2015 Part 10: Driver distraction and information display
- ISO/TS 17429:2017 Intelligent transport systems – Cooperative ITS – ITS station facilities for the transfer of information between ITS stations
- ISO 17432:2004 Health informatics – Messages and communication – Web access to DICOM persistent objects
- ISO 17438 Intelligent transport systems – Indoor navigation for personal and vehicle ITS station
- ISO 17438-1:2016 Part 1: General information and use case definition
- ISO/TS 17439:2014 Health informatics – Development of terms and definitions for health informatics glossaries
- ISO 17442:2012 Financial services - Legal Entity Identifier (LEI)
- ISO/TS 17444 Electronic fee collection – Charging performance
- ISO/TS 17444-1:2017 Part 1: Metrics
- ISO/TS 17444-2:2017 Part 2: Examination framework
- ISO 17450 Geometrical product specifications (GPS) - Basic concepts[Note 3]
- ISO 17450-1:2011 Part 1: Model for geometrical specification and verification
- ISO 17450-2:2012 Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
- ISO 17450-3:2016 Part 3: Toleranced features
- ISO 17450-4:2017 Part 4: Geometrical characteristics for quantifying GPS deviations
- ISO 17451 Packaging - Codification of contents for inventories for shipments of household goods and personal effects
- ISO 17451-1:2016 Part 1: Numeric codification of inventories
- ISO/TS 17451-2:2017 Part 2: XML messaging structure for electronic transmission of inventory data
- ISO/TR 17452:2007 Intelligent transport systems – Using UML for defining and documenting ITS/TICS interfaces
- ISO/IEC 17462:2000 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-4 format
- ISO/TR 17465 Intelligent transport systems - Cooperative ITS
- ISO/TR 17465-1:2014 Part 1: Terms and definitions
- ISO/TR 17465-2:2015 Part 2: Guidelines for standards documents
- ISO/TR 17465-3:2015 Part 3: Release procedures for standards documents
- ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
- ISO 17468:2016 Microbiology of the food chain – Technical requirements and guidance on establishment or revision of a standardized reference method
- ISO 17469 Document management - Strategy markup language (StratML)
- ISO 17469-1:2015 Part 1: StratML core elements
- ISO 17480:2015 Packaging - Accessible design - Ease of opening
- ISO 17488:2016 Road vehicles – Transport information and control systems – Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
- ISO/TS 17503:2015 Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossed designs
- ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
- ISO 17510:2015 Medical devices – Sleep apnoea breathing therapy – Masks and application accessories
- ISO 17515 Intelligent transport systems – Communications access for land mobiles (CALM) – Evolved universal terrestrial radio access network (E-UTRAN)
- ISO 17515-1:2015 Part 1: General usage
- ISO 17516:2014 Cosmetics – Microbiology – Microbiological limits
- ISO/TR 17522:2015 Health informatics – Provisions for health applications on mobile/smart devices
- ISO 17523:2016 Health informatics – Requirements for electronic prescriptions
- ISO 17526:2003 Optics and optical instruments – Lasers and laser-related equipment – Lifetime of lasers
- ISO 17532:2007 Stationary equipment for agriculture – Data communications network for livestock farming
- ISO 17534 Acoustics – Software for the calculation of sound outdoors
- ISO 17534-1:2015 Part 1: Quality requirements and quality assurance
- ISO/TR 17534-2:2014 Part 2: General recommendations for test cases and quality assurance interface
- ISO/TR 17534-3:2015 Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
- ISO/IEC 17549 Information technology – User interface guidelines on menu navigation
- ISO/IEC 17549-2:2015 Part 2: Navigation with 4-direction devices
- ISO/IEC 17568:2013 Information technology – Telecommunications and information exchange between systems – Close proximity electric induction wireless communications
- ISO 17572 Intelligent transport systems (ITS) – Location referencing for geographic databases
- ISO 17572-1:2015 Part 1: General requirements and conceptual model
- ISO 17572-2:2015 Part 2: Pre-coded location references (pre-coded profile)
- ISO 17572-3:2015 Part 3: Dynamic location references (dynamic profile)
- ISO 17573:2010 Electronic fee collection – Systems architecture for vehicle-related tolling
- ISO/TS 17574:2017 Electronic fee collection – Guidelines for security protection profiles
- ISO 17575 Electronic fee collection – Application interface definition for autonomous systems
- ISO 17575-1:2016 Part 1: Charging
- ISO 17575-2:2016 Part 2: Communication and connection to the lower layers
- ISO 17575-3:2016 Part 3: Context data
- ISO/TS 17582:2014 Quality management systems – Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government
- ISO/IEC 17592:2004 Information technology - 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)
- ISO/IEC 17594:2004 Information technology - Cases for 120 mm and 80 mm DVD-RAM disks
- ISO 17599:2015 Technical product documentation (TPD) – General requirements of digital mock-up for mechanical products
- ISO 17604:2015 Microbiology of the food chain – Carcass sampling for microbiological analysis
- ISO 17631:2002 Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape
- ISO 17658:2002 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
- ISO 17659:2002 Welding - Multilingual terms for welded joints with illustrations
- ISO 17677 Resistance welding - Vocabulary
- ISO 17677-1:2009 Part 1: Spot, projection and seam welding
- ISO 17679:2016 Tourism and related services – Wellness spa – Service requirements
- ISO 17680:2015 Tourism and related services – Thalassotherapy – Service requirements
- ISO 17687:2007 Transport Information and Control Systems (TICS) – General fleet management and commercial freight operations – Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation
- ISO 17712:2103 Freight containers — Mechanical seals - updated the 2010 version: offers "a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce".[5] Supported by C-TPAT (the use of "H" class seals is required).[6]
- ISO 17713 Meteorology – Wind measurements
- ISO 17713-1:2007 Part 1: Wind tunnel test methods for rotating anemometer performance
- ISO 17714:2007 Meteorology – Air temperature measurements – Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- ISO 17717:2017 Meteorological balloons – Specification
- ISO 17724:2003 Graphical symbols - Vocabulary
- ISO/TS 17728:2015 Microbiology of the food chain – Sampling techniques for microbiological analysis of food and feed samples
- ISO 17740 Building construction machinery and equipment – Concrete placing systems for stationary equipment
- ISO 17740-1:2015 Part 1: Terminology and commercial specifications
- ISO/IEC 17760 Information technology - AT Attachment[Note 3]
- ISO/IEC 17760-101:2015 Part 101: ATA/ATAPI Command Set (ATA8-ACS)
- ISO/IEC 17760-102:2016 Part 102: ATA/ATAPI Command set - 2 (ACS-2)
- ISO 17772 Energy performance of buildings - Indoor environmental quality
- ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
- ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
- ISO/IEC 17788:2014 Information technology - Cloud computing - Overview and vocabulary
- ISO/IEC 17789:2014 Information technology - Cloud computing - Reference architecture
- ISO/TR 17791:2013 Health informatics – Guidance on standards for enabling safety in health software
- ISO 17799 Information technology - Security techniques - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
- ISO 17800 Building environment design – Facility Smart Grid Information Model
- ISO/IEC 17811 Information technology – Device control and management
- ISO/IEC 17811-1:2014 Part 1: Architecture
- ISO/IEC 17811-2:2015 Part 2: Specification of Device Control and Management Protocol
- ISO/IEC 17811-3:2014 Part 3: Specification of Reliable Message Delivery Protocol
- ISO/IEC 17821:2015 Information technology – Specification of low power wireless mesh network over channel-hopped TDMA links
- ISO/TS 17822 In vitro diagnostic test systems - Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens
- ISO/TS 17822-1:2014 Part 1: General requirements, terms and definitions
- ISO/IEC 17825:2016 Information technology - Security techniques - Testing methods for the mitigation of non-invasive attack classes against cryptographic modules
- ISO/IEC 17826:2016 Information technology - Cloud Data Management Interface (CDMI)
- ISO/IEC 17839 Information technology – Identification cards – Biometric System-on-Card[Note 3]
- ISO/IEC 17839-1:2014 Part 1: Core requirements
- ISO/IEC 17839-2:2015 Part 2: Physical characteristics
- ISO/IEC 17839-3:2016 Part 3: Logical information interchange mechanism
- ISO 17853:2011 Wear of implant materials – Polymer and metal wear particles – Isolation and characterization
- ISO/TS 17863:2013 Geometrical product specification (GPS) - Tolerancing of moveable assemblies
- ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
- ISO/IEC 17875:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Registration supplementary service
- ISO/IEC 17876:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol—Private User Mobility (PUM) – Registration supplementary service
- ISO/IEC 17877:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Call handling additional network features
- ISO/IEC 17878:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Private User Mobility (PUM) – Call handling additional network features
- ISO 17893:2004 Steel wire ropes - Vocabulary, designation and classification
- ISO 17894:2005 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
- ISO 17901 Optics and photonics – Holography
- ISO 17901-1:2015 Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms
- ISO 17901-2:2015 Part 2: Methods for measurement of hologram recording characteristics
- ISO 17907:2014 Ships and marine technology - Single point mooring arrangements for conventional tankers
- ISO/IEC 17913:2000 Information technology – 12,7mm 128-track magnetic tape cartridge for information interchange – Parallel serpentine format
- ISO/TS 17915:2013 Optics and photonics – Measurement method of semiconductor lasers for sensing
- ISO/TS 17919:2013 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of botulinum type A, B, E and F neurotoxin-producing clostridia
- ISO 17933:2000 GEDI - Generic Electronic Document Interchange
- ISO/TS 17938:2014 Health informatics – Semantic network framework of traditional Chinese medicine language system
- ISO 17937:2015 Dentistry - Osteotome
- ISO/TS 17948:2014 Health informatics – Traditional Chinese medicine literature metadata
- ISO/IEC 17960:2015 Information technology - Programming languages, their environments and system software interfaces - Code signing for source code
- ISO/IEC TS 17961:2013 Information technology - Programming languages, their environments and system software interfaces - C secure coding rules
- ISO/IEC 17963:2013 Web Services for Management (WS-Management) Specification
- ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries – Guidelines on competency for personnel
- ISO 17972 Graphic technology - Colour data exchange format (CxF/X)[Note 3]
- ISO 17972-1:2015 Part 1: Relationship to CxF3 (CxF/X)
- ISO 17972-2:2016 Part 2: Scanner target data (CxF/X-2)
- ISO 17972-3:2017 Part 3: Output target data (CxF/X-3)
- ISO 17972-4:2015 Part 4: Spot colour characterisation data (CxF/X-4)
- ISO/TS 17975:2015 Health informatics – Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information
- ISO/IEC 17982:2012 Information technology – Telecommunications and information exchange between systems – Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
- ISO 17987 Road vehicles – Local Interconnect Network (LIN)
- ISO 17987-2:2016 Part 2: Transport protocol and network layer services
- ISO 17994:2014 Water quality – Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- ISO 17995:2005 Water quality – Detection and enumeration of thermotolerant Campylobacter species
- ISO/IEC 17998:2012 Information technology - SOA Governance Framework
Notes
[edit]- ^ This list generally excludes draft versions.
- ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
- ^ a b c d e f The exact wording of this title varies between parts. This is the wording of the most recently published part.
References
[edit]- ^ "ISO - ICS". ISO. Retrieved 2024-06-14.
- ^ "Publicly Available Standards". standards.iso.org. Retrieved 2024-06-14.
- ^ ISO, ISO/IEC 17050-1:2004 Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements, accessed 2 July 2020
- ^ ISO, ISO/IEC 17050-2:2004 Conformity assessment — Supplier's declaration of conformity — Part 2: Supporting documentation, accessed 2 July 2020
- ^ ISO, ISO 17712:2103: Freight containers — Mechanical seals, accessed 6 December 2020
- ^ Mega Fortis Group, What exactly is an ISO 17712 Certified or a C-TPAT “Compliant” Security Seal?, published 6 November 2017, accessed 6 December 2020