Lightweighting
Lightweighting is a concept in the auto industry about building cars and trucks that are less heavy as a way to achieve better fuel efficiency, battery range, acceleration, braking and handling.[1][2] In addition, lighter vehicles can tow and haul larger loads because the engine is not carrying unnecessary weight.[3] Excessive vehicle weight is also a contributing factor to particulate emissions from tyre and brake wear.[4][5]
Carmakers make body structure parts from aluminium sheet, aluminium extrusions,press hardening steel, carbon fibers, windshields from plastic, and bumpers out of aluminum foam, as ways to lessen vehicle load.[6] Replacing car parts with lighter materials does not lessen overall safety for drivers, according to one view, since many grades of aluminium and plastics have a high strength-to-weight ratio; and aluminum has high energy absorption properties for its weight.[6]
The search to replace car parts with lighter ones is not limited to any one type of part; according to a spokesman for Ford Motor Company, engineers strive for lightweighting "anywhere we can."[7] Using lightweight materials such as plastics, high strength steels and aluminium can mean less strain on the engine and better gas mileage as well as improved handling.[8] One material sometimes used to reduce weight for structures that can accept the cost premium is carbon fiber.[9] The auto industry has used the term for many years, as the effort to keep making cars lighter is ongoing.[2]
Another common material used for lightweighting is aluminum.[10] Incorporating aluminum has grown continuously to not only meet CAFE standards but to also improve automotive performance. A light weighting magazine finds: "Even though aluminum is light, it does not sacrifice strength. Aluminum body structure is equal in strength to steel and can absorb twice as much crash-induced energy."[11] The use of aluminium for lightweighting can be limited for the higher strength grades by their low formability - and in response to this forming challenge new techniques such as roll forming and hot forming (Hot Form Quench) have been introduced in recent years.
Many other materials are used to meet lightweighting goals.[12] Cost of lightweighting, and increasingly sustainability of materials, is becoming an issue in solution selection - with the viable cost increase of a part per kilogram saved being between $5 and $15,[13] depending on the price point and performance needs of the vehicle.
References
[edit]- ^ JIM MOTAVALLI, OCT. 11, 2012, The New York Times, For Lightweight Cars, a Materials Race, Retrieved April 11, 2015, "...carmakers and the federal government are pouring resources into “lightweighting” auto platforms to meet the Corporate Average Fuel Economy, or CAFE, standards...."
- ^ a b Chris Woodyard, USA TODAY, June 3, 2014, Ford shows off lightweight car concept, Retrieved April 11, 2015, "..."Lightweighting our vehicles is incredibly important to us in terms of improving fuel economy and reducing CO2 emissions,"..."
- ^ admin (2023-03-08). "Why Commercial Vehicles are Turning to Light-Weighting". ConMet. Retrieved 2024-03-12.
- ^ Carrington, Damian (2022-06-03). "Car tyres produce vastly more particle pollution than exhausts, tests show". The Guardian. ISSN 0261-3077. Retrieved 2024-03-12.
- ^ Oroumiyeh, Farzan; Zhu, Yifang (2021-12-01). "Brake and tire particles measured from on-road vehicles: Effects of vehicle mass and braking intensity". Atmospheric Environment: X. 12: 100121. Bibcode:2021AtmEX..1200121O. doi:10.1016/j.aeaoa.2021.100121. ISSN 2590-1621.
- ^ a b Dee-Ann Durbin of the Associated Press, June 17, 2014, Mercury News, Auto industry gets serious about lighter materials, Retrieved April 11, 2015, "...Automakers have been experimenting for decades with lightweighting, as the practice is known, but the effort is gaining urgency with the adoption of tougher gas mileage standards. ..."
- ^ NEAL E. BOUDETTE and MIKE RAMSEY, Jan. 14, 2013, Wall Street Journal, Detroit Sheds Pounds for Gas-Mileage Gains, Retrieved April 11, 2015, "...Today, we look at lightweighting anywhere we can," said ... of Ford...."
- ^ May 2, 2013, Chicago Tribune, Improving automobile fuel efficiency - with plastics, Retrieved April 11, 2015, "...Due to their positive strength-to-weight ratio, plastics make up an astonishing 50 percent of today’s cars by volume, but only 10 percent by weight. This “lightweighting” results in less strain on the engine and improved gas mileage...."
- ^ Daniel C. Esty, March 4, 2007, Washington Post, When Being Green Puts You in the Black, Retrieved April 11, 2015, "...Toyota reported record profits last year because it put these issues at the center of its design strategy, which includes hybrid engines, "lightweighting" of its vehicles through the use of carbon fiber and other advanced materials, .."
- ^ Lampinen, Megan (2022-07-28). "The pros of lightweighting with aluminium in a battery-powered world". Automotive World. Retrieved 2024-03-09.
- ^ Marin, Andy. "Vacuum Impregnation Enables Lightweight Material Use". Light Weighting World. Light Weighting World magazine.
- ^ Taub, Alan; De Moor, Emmanuel; Luo, Alan; Matlock, David K.; Speer, John G.; Vaidya, Uday (2019). "Materials for Automotive Lightweighting". Annual Review of Materials Research. 49: 327–359. Bibcode:2019AnRMS..49..327T. doi:10.1146/annurev-matsci-070218-010134. OSTI 1818967. S2CID 198386141.
- ^ "Automotive lightweight – Heavy impact". SlideShare. 2016-10-06. Retrieved 2024-03-12.