Label Information Base
 | The topic of this article may not meet Wikipedia's general notability guideline. (December 2020) |
Label Information Base (LIB) is the software table maintained by IP/MPLS capable routers to store the details of port and the corresponding MPLS router label to be popped/pushed on incoming/outgoing MPLS packets.
Entries are populated from label-distribution protocols.
LDP is a protocol that automatically generates and exchanges labels between routers. Each router will locally generate labels for its prefixes and will then advertise the label values to its neighbors. It's a standard, based on Cisco's proprietary TDP (Tag Distribution Protocol). Nowadays almost everyone uses LDP instead of TDP.
LDP first establishes a neighbor adjacency before it exchanges label information. It works a bit differently than most protocols though. LIB functions in the control plane of router's MPLS layer. It is used by the label distribution protocol for mapping the next hop labels. [1]
References
[edit]- ^ "MPLS LDP (Label Distribution Protocol)". 20 August 2015.
 | This computer networking article is a stub. You can help Wikipedia by expanding it. |