Jump to content

Indian locomotive class WAG-2

From Wikipedia, the free encyclopedia

Indian locomotive class WAG-2
Type and origin
Power typeElectric
BuilderMitsubishi, Toshiba, Hitachi
Build date1964–1965
Total produced45
Specifications
Configuration:
 • AARB-B
 • UICBo-Bo
Gauge5 ft 6 in (1,676 mm)
BogiesMonomotor B-B bogies
Wheel diameterNew:1,140 mm (3 ft 9 in)
Half worn: 1,120 mm (3 ft 8 in)
Full worn: 1,064 mm (3 ft 6 in)
Length14.600 m (47 ft 10+1316 in)
Width3.152 m (10 ft 4+332 in)
Height4.165 m (13 ft 7+3132 in)
Axle load19,000 kg (42,000 lb)
Loco weight76,000 kg (168,000 lb)
Electric system/s25 kV 50 Hz AC overhead
Current pickup(s)Pantograph
Traction motorsMitsubishi MB 3045-A (745hp, 725V, 815A, 1000 rpm, weight 2200 kg).
Loco brakeAir
Train brakesVacuum
Performance figures
Maximum speed80 km/h (50 mph)
Power outputMaximum: 3,500 hp (2,610 kW)
Continuous: 3,450 hp (2,573 kW)
Tractive effortStarting: 25,240 kgf (247.5 kN; 55,600 lbf)
Career
OperatorsIndian Railways
Numbers20804-848
LocaleEastern Railways, later relocated to Central Railways
Retired2001
DispositionAll scrapped

The Indian locomotive class WAG-2 was a class of 25 kV AC electric locomotives that was imported from Japan in the 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) locomotive, 2nd generation (2). A total of 45 WAG-2 locomotives were built by The Japanese Group (a consortium of Mitsubishi, Hitachi and Toshiba) between 1964 and 1965. They entered service in 1964.

The WAG-2 served both passenger and freight trains for nearly 40 years. As of January 2001, all locomotives have been withdrawn from service and scrapped.

History

[edit]

These locomotives were built by a consortium of Mitsubishi, Hitachi and Toshiba (The Japanese Group, as attested by a plaque fixed on their sides) as an alternative to the European-built WAG-1.[1] They were delivered in 1964 and had a greater horsepower rating than the WAM-1 but had similar Bo-Bo wheel arrangement (4 wheels per bogie) with four Hitachi DC traction motors connected to the wheels permanently in parallel through a WN geared drive.[2] The WAG-2 had Ignitron rectifiers just like the WAG-1, but some were later refitted with Excitron rectifiers. Some even had the Mitsubishi logo painted on their sides.[citation needed]

None of the WAG-2s had been retrofitted with air train brakes. Like the WAG-1, they were also used around the ER-SER-NER-NR circuit as it was the first AC electrified area, and hauled ordinary passenger trains and freights only. They were also used double-headed on freight trains. They had four traction motors permanently coupled in parallel are fed by ignitron rectifiers. Speed control was by a tap changer on the input transformer. Mitsubishi transformer, 20 taps. Oerlikon exhauster and compressor, Arno rotary converter. They were based at Asansol Loco Shed of Eastern Railways and then transferred to Bhusawal and Itarsi sheds of Central Railways in 1985. Due to aging, the WAG-2 locomotives were withdrawn in 2001. None have been preserved.[citation needed]

Specifications

[edit]
  • Manufacturer: The Japanese Group (consortium of Hitachi, Mitsubishi and Toshiba)
  • Build dates: 1964-65
  • Wheel arrangement: B-B (monomotor bogies like WAG-1)
  • Traction Motors: Hitachi EFCO HKK (1270 kW, 1250 V, 1080 A, 695 rpm, weight 5300 kg).
  • Transformer: Hitachi AFI AMOC. 32 taps.
  • Rectifiers: AEV-48 silicon rectifiers, 2040 A / 2550 kW.
  • Pantographs: Two Faiveley AM-12

Locomotive shed

[edit]
  • All locomotives of this class have been withdrawn from service.

See also

[edit]

References

[edit]
  1. ^ "Chapter I – General 30100 Evolution of Electrical Rolling Stock– 1 Electrical Concept 1".
  2. ^ "WAG2".
[edit]