Highflyer-class corvette

	Profile of Highflyer dated 1863
Class overview
Name	Highflyer class
Operators	Royal Navy
Preceded by	None
Succeeded by	HMS Pylades
Built	1851–1854
In service	1852–1871
Completed	2
Scrapped	2
General characteristics
Type	Wooden screw corvette
Displacement	1,737+1⁄2 tons
Tons burthen	1,153 bm
Length	192 ft (59 m) oa; 167 ft 3+3⁄4 in (50.997 m) pp;
Beam	36 ft 4 in (11.07 m)
Draught	15 ft 9 in (4.80 m)
Depth of hold	22 ft 8 in (6.91 m)
Installed power	Highflyer: 702 ihp (523 kW); Esk: 657 ihp (490 kW);
Propulsion	Highflyer:; 2-cylinder horizontal single-expansion steam engine; Single screw; Esk:; 2-cylinder inclined single-expansion oscillating steam engine; Single screw;
Sail plan	Full-rigged ship
Speed	9.4 kn (17.4 km/h) under steam
Armament	As built:; 21 guns:; 1 × 10-inch/84-pdr (85cwt) gun; 20 × 32-pounder (42cwt) long guns; Later:; 1 × 10-inch/84-pdr (85cwt) gun; 18 × 8-inch guns;

The Highflyer-class corvettes were a pair of 21-gun wooden screw corvettes built in the 1850s for the Royal Navy.

Design

Highflyer was ordered as a small wooden frigate to a design by the Surveyor's Department of the Admiralty on 25 April 1847; she and her sister Esk were re-designated as corvettes in 1854. These ships were envisaged as steam auxiliaries, intended to cruise under sail with the steam engine available for assistance. Commensurately they were provided with a full square sailing rig. Esk was built in exchange for HMS Greenock (which went to the Australian Royal Mail Co.) The words of the Admiralty Order stated she should be "a wood screw vessel complete of Highflyer's [class] in exchange when built".^[1]

Propulsion

Highflyer was given a geared two-cylinder horizontal single-expansion steam engine, provided by Maudslay, Sons & Field, which developed 702 indicated horsepower (523 kW) and drove a single screw.^[1] Esk was provided with an oscillating two-cylinder inclined single-expansion steam engine, provided by the builders, was quite different from Highflyer's, but developed broadly the same power — 657 indicated horsepower (490 kW) — and drove a single screw.^[1]

Armament

The class was a 21-gun corvette, mounting twenty 32-pounder (42 cwt) long guns in a broadside arrangement, and a single 10-inch 84-pounder (85 cwt) gun on a pivot. Both ships later swapped their broadside 32-pounders for eighteen 8-inch guns.^[1]

Construction

Highflyer was built at Leamouth Wharf by C J Mare & Co., while Esk was ordered from the Millwall yard of J. Scott Russell & Co. on the River Thames.^[1]

Ships

Ship	Builder	Laid down	Launched	Completed	Fate
Highflyer	C J Mare & Co.^[1]	January 1850^[1]	13 August 1851^[1]	10 April 1852^[1]	Broken up, May 1871^[1]
Esk	J. Scott Russell & Co.^[1]	April 1853^[1]	12 June 1854^[1]	21 December 1854^[1]	Broken up, 1870^[1]

Citations

^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o ^p Winfield (2004), p. 207

References

Winfield, R.; Lyon, D. (2004). The Sail and Steam Navy List: All the Ships of the Royal Navy 1815–1889. London: Chatham Publishing. ISBN 978-1-86176-032-6. OCLC 52620555.

[RW-1] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o ^p Winfield (2004), p. 207

[1]